• Journal of the Korea Safety Management & Science
• /
• v.25 no.1
• /
• pp.23-29
• /
• 2023

Among the Additive Manufacturing (AM) technologies, the Binder-Jetting printing technology is a method of spraying an adhesive on the surface of powder and laminate layer by layer. Recently, this technique has become a major issue in the production of large casting products such as ship-building, custom vehicles and so on. In this study, we performed research to make actual mold castings and increase mechanical property by using special sand and water-based binders. For use as a mold, it has a strength of more than 3MPa and permeability. Various experiments were carried out to obtain suitable them. The major process parameters were binder jetting volume, binder types, layer thickness and heat treatment condition. As a result of this study, the binder drop quantity was measured to be about 60 pico-liter, layer thickness was 100㎛ and the heat treatment condition was measured about 1,000℃ and compressive strength were measured to be more than 5MPa. The optimum condition of this experiment was established through actual casting of aluminum. The equipment used in this study was a Freeforms T400 model (SFS Co., Ltd.), and the printing area of 420 * 300 * 250mm and resolution of 600dpi can be realized.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.1 no.2
• /
• pp.78-88
• /
• 2009

In shipbuilding industry, the manufacturing technology has advanced at an unprecedented pace for the last decade. As a result, many automatic systems for cutting, welding, etc. have been developed and employed in the manufacturing process and accordingly the productivity has been increased drastically. Despite such improvement in the manufacturing technology, however, development of an automatic system for fabricating a curved hull plate remains at the beginning stage since hardware and software for the automation of the curved hull fabrication process should be developed differently depending on the dimensions of plates, forming methods and manufacturing processes of each shipyard. To deal with this problem, it is necessary to create a "plug-in" framework, which can adopt various kinds of hardware and software to construct a full automatic fabrication system. In this paper, a framework for automatic fabrication of curved hull plates is proposed, which consists of four components and related software. In particular the software module for computing fabrication information is developed by using the ooCBD development methodology, which can interface with other hardware and software with minimum effort. Examples of the proposed framework applied to medium and large shipyards are presented.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.4
• /
• pp.121-133
• /
• 2008

In manufacturing companies, engineering information is a central data which defines a product to be produced. This is changed by various factors such as changes of product configuration, changes of drawings information of a technology's licensor, etc, and these changes essentially accompany the changes of a product BOM (Bill of Materials) structure. Thus, engineering changes gives a heavy burden to information management within enterprise because the changes of product BOM have an influence on each departmental BOM such as a procurement BOM, a manufacturing BOM, a quotation BOM, etc. Especially, these changes of product BOM due to the engineering changes is inevitably and frequently happened by a customer's requirements in a customer-oriented make-to-order manufacturing environments. In these manufacturing environments, information gap among each department from the first contact point of customer to engineering, materials, production, quality, and management is very close, and thus it is very important that the change information of product BOM due to changes of product specification and engineering information are efficiently communicated among each department. This paper describes a procedure of determining product specification and of generating product BOM, and proposes an efficient management scheme for the change process of product BOM information due to changes of product specification and engineering. Also, to show the effectiveness of the proposed product BOM management scheme, a product BOM management system is implemented for the ship engine division of 'H' company, one of customer-oriented make-to-order manufacturing enterprises.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.3
• /
• pp.188-197
• /
• 2012

Recently, aluminum ships are constructed more than ever because of the environmental pollution generated by FRP (Fiber Reinforced Plastic) ships. In particular, FRP ships have been replaced by the Aluminum ships. The forming process of the curved aluminum plate has been performed only by labor works without systematic technique. Therefore, it is difficult to construct the aluminum ship that the design satisfies both required propulsion performance and hull design. Present study introduces a MPSF (Multi Point Stretching Forming) that is a flexible manufacturing technique to form large sheet panels of doubly curvature. The hull pieces are stretch-formed over the MPSD (multi-point stretching die) generated by the punch element matrix. In this study, MPSF is applied to deform the doubly curved surfaces of aluminum ship. The forming system including FEA (finite element analysis) of the processes for stretching the plate were carried out by static implicit analysis is suggested. Residual deformation of the surface is modeled by an elasto-plastic contact phenomena while the forming process is simulated by FEA. Finally, the proposed system is also validated, comparing the deformed shape by MPSF with that of object surfaces.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.7
• /
• pp.105-112
• /
• 2021

Reduction of weld distortions and increase in productivity are some of the major goals of the shipbuilding industry. To address these issues, many researchers have attempted to apply new welding processes. In the shipbuilding industry, steel is the candidate material of choice owing to its good weldability. However, conventional welding techniques are not feasible for avoiding welding problems. Tip-rotating arc welding is one of the high-efficiency welding process that has several advantages, such as high welding speed, high melting rate, low heat input, and less distortion. The present study investigates the influence of the welding variables on the weld characteristics of tip-rotating arc welding. Welding was performed using EH36 as the base metal and SM-70s as the filler metal, which are widely used in shipbuilding. Basic experiments were conducted to understand the effects of the major welding variables, such as welding and tip-rotating speeds. The distortion and mechanical properties of the optimal welding conditions were used to evaluate the tip-rotating arc welding performance. Consequently, the feasibility of the tip-rotating arc welding process for joining steel components was investigated, so that the optimized welding conditions could be applied directly to ship body welding to enhance the quality of the welded joints.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.6
• /
• pp.425-439
• /
• 2010

The current challenge with which most shipyards are forced is to reduce the design time and the time-to-delivery because of explosive order of shipbuilding. Collaborative design and product data management have become important to reduce the lead time. Furthermore, enterprise information technologies such as ERP (Enterprise Resource Planning), SCM (Supply Chain management), and APS (Advanced Planning System) requires the collaborative environment. Also, manufacturing environment has been considered as a topic of strategic interest to get shorter product lifecycles in shipyards. Most shipyards have chosen an environment of ETO (Engineering To Order) strategy which designs and produces new products in response to various requirements of customer, rules and regulations. In the ATO (Assemble 10 Order) environment, most component parts have been designed to be procured or produced on the order requirement. The basic distinction between the ETO and ATO is the timing of the design. Thus in the ATO environment, it is more flexible in reducing the lead time to meet the specified requirements of customers. However, the ETO strategy requires new ship design process and ship product structures that are linked with the implementation of PLM. And, the function and architecture of current PLM solution has been designed based upon ATO environment properly. This paper presents the PLM architecture which effectively reflects the characteristics of shipbuilding. 4-layer architecture model is suggested to implement the PLM system. Also, implemented functions of ship PLM is explained in order to make a practical guidance for ship PLM implementation.

• IE interfaces
• /
• v.12 no.3
• /
• pp.395-400
• /
• 1999

Shipbuilding process is composed of hull construction, in which the structural body of a ship is formed, and outfitting, in which all the non-structural parts such as pipes, derricks, engines, machinery, electrical cable, etc. are manufactured, added and assembled. Hull construction can be classified into parts fabrication, block assembly and hull erection. Among them, the parts fabrication is the first manufacturing stage that produces components or zones needed for block assembly and hull construction. More specifically, the parts fabrication is performed through machining processes including marking, cutting, pressing, and/or forming. When material is entering into the parts fabrication stage, it is important for achieving the total efficiency of production to select one of production division, so-called 'bay,' as well as machine tools on which the part is fabricated. In this paper, given production quantities of parts in the fabrication stage, the problem is to optimally select machine tools and production division, such that the total flow-time is minimized as well as the workload among machines is balanced. Specifically, three mathematical models for flow-time minimization, load balance, and simultaneously considering both objectives, and a numerical example are analyzed and presented.

• IE interfaces
• /
• v.16 no.1
• /
• pp.70-84
• /
• 2003

Recently, object-oriented techniques have been used more and more for developments of an information system. But, established object-oriented methodologies are hard to express a business process of various abstract degrees in the analysis level and independent components of the system. They have difficulties in developing a large-scale information system of manufacturing industry such as PDM and CIM. This paper proposes an information system development methodology that imports the object-oriented IDEF0 (OOIDEF0) function model in analysis level. This methodology is made up of requirements gathering, system analysis, system design, and implementation. In requirements gathering level, organization diagram and interview technique are used for input data of OOIDEF0 function model. The OOIDEF0 function model, the interface model and function descriptions are made out in analysis level. Information objects and implementation objects are designed on the basis of the OOIDEF0 function model in design level. The database is built and programming is accomplished in implementation level. In order to prove the consistency and efficiency of the proposed methodology, the PDM system for ship production is modeled and prototyped.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.2
• /
• pp.136-143
• /
• 2018

3-D templates are produced to evaluate completeness of the shell plates during the forming process, which is an essential step for the ship production. They are mostly produced in advance during the detail/production design stage, but occasionally they are requested by the shell plate forming department, because it is impossible to predict accurately the necessities of them at the design stage. This results in a huge loss of man-hour and a bottleneck. In order to resolve this issue while reducing the dependence on other department, the process of manufacturing the 3-D templates needs to be automated. Therefore, this study proposes an automatic system that calculates the manufacturing information of the 3-D templates with only geometric information of the shell plates. The system considers the thickness and the cutting method of the parts of the 3-D templates and some options are provided to reflect the intention of the worker.

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.593-598
• /
• 2014

To solve the labor shortage of skilled workers, the ship building industry needs the automation and mechanization. Especially, compared with other process, handrail manufacturing process of ship building falls behind the automation. In this paper, we designed and implemented a flat-iron automation system using computer convergence technology that can be used in the production of handrails in shipbuilding. The system's machine part was designed by considering the efficiency, productivity, and stability of the cutting process, and checked the stability of the structure using CATIA and ANSYS. The system's control part was used the PCNC controller to provide openness and scalability. And the part was made for system control and monitoring the system through screen manipulation with touch-screen form. A flat-iron automatic system was developed by converging the mechanics, electronics and computer technology and it will contribute to improve the productivity of the industrial system.