• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.170-171
• /
• 2011

Recently, container terminal managers make an experiment on the double cycle and dual cycle operation, which ship loading and unloading were carried out simultaneously, for increasing the productivity of quay side. If, however, we make an experiment on dual cycle operation in a real job site, the efficiency is poor up to terminal operation method as YTs(Yard Tractors)' allocation method, QCs(Quay Cranes)' working speed, and position of export containers. Especially, using the existing yard operation method, it is difficult to support to dual and double cycle operation. Therefore, this paper examine more efficient terminal operation method, when terminal uses dual cycle operation. We developed a simulation model using simulation analysis software, Arena.

• The Journal of Information Systems
• /
• v.21 no.4
• /
• pp.185-199
• /
• 2012

The most of international shipping cargoes are transported by ship and the shipping market has been continuously increasing. However, due to the recent global recession, the volume of trade decreased accordingly, and the competition between shippers to gain a competitive advantage in the shipping market continues deepening. To do this, researches on transportation costs savings as well as ways to improve customer service are needed and recently related researches are being pursued. Car carriers which transport more than 80% of car import and export volume in the world also make a lot of effort in order to reduce transportation costs, but in contrast related researches are seldom fulfilled. In this study, we developed an agent system that supports the efficient transportation of car carriers plan so that the car carriers can increase competitiveness through reduction of the logistics costs. To make this, we researched an algorithm for maritime transportation planning, and also developed a prototype of an agent system which can collect the necessary information in real time and establish a dynamic plan.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.3
• /
• pp.13-24
• /
• 1991

This paper aims to determining the optimal capacity of Pusan port in view point of Container Physical Distribution cost. It has been established a coast model of the container physical distribution system in Pusan port is composed of 4 sub-systems and in-land transport system. Cargo handling system, transfer & storage system and in-land transport system, and analyzed the cost model of the system. From this analysis, we found that the system had 7 routes including in-land transport by rail or road and coastal transport by feeder ship between Pusan port and cargo owner's door. Though railway transport cost was relatively cheap, but, it was limited to choose railway transport routes due to the introducing of transport cargo allocation practice caused by shortage of railway transport capacity. The physical distribution ost for total import & export container through Pusan port was composed of 4.47% in port entring cost, 12.98% in cargo handling cost, 7.44% in transfer & storage cost and 75.11% in in-land transport cost. Investigation in case of BCTOC verified the results as follows. 1) The optimal level of one time cargo handling was verified 236VAN (377TEU) and annual optimal handling capacity was calculated in 516, 840VAN(826, 944TEU) where berth occupancy is $\rho$=0.6 when regardless of port congestion cost, 2) The optimal level of one time cargo handling was verified 252VAN (403TEU) and annual optimal handling capacity was calculated in 502, 110VAN (803, 376TEU) where berth occupancy is $\rho$=0.58 when considering of port congestion cost.

• Journal of Navigation and Port Research
• /
• v.32 no.4
• /
• pp.295-304
• /
• 2008

In order to achieve a sustainable competitive advantage in the expanding maritime transportation market, most shipping companies are making every effort to reduce transportation costs. Likewise, the car shipping companies, which carry more than 80% of total car import and export logistics volume, also do their utmost for transportation cost saving. Until now many researches have been made for efficient maritime transportation, but studies for car shipping companies have rarely been made. For this reason, this study has tried to develop a maritime transportation planning support system which can help to save logistics costs and increase a competitive power of car shipping companies. To this end, instead of manual effort to solve the routing problem of car carrier vessels, this study has used an integer programming model to make an optimal transportation planning at the minimum cost. Also in response to the frequent changes both in the car production schedule and ship's arrival schedule after the completion of transportation planning, this research has developed a decision support system of maritime transportation, so that users can easily modify their existing plans.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.31-35
• /
• 2020

Hydraulic winches for transportation and logistics in the shipbuilding and marine plant fields require multi-stage planetary gear modules with high gear ratios. Due to environmental conditions in the ship, durability is crucial. Further, we are currently relying on foreign products. The development of domestic technology will reduce cost, save time, and improve the export market. Thus, we developed a multi-stage planetary gear module for a hydraulic winch and evaluated its performance through several tests of the hydraulic brake torque, maximum torque, and load endurance.

• Horticultural Science & Technology
• /
• v.18 no.1
• /
• pp.22-27
• /
• 2000

National plant quarantine inspector of exporting country should inspect agricultural products according to the quarantine requisites of counterpart country when the commodities are shipped. Export of pear fruits was held because quarantine pests including Conogethes punctiferalis were found at the point of entry in Canada. In order to examine the problems in detail, the inspected pear fruits were stored at a low temperature for 43 days, almost the same period necessary for fruit sorting, quarantine procedures, and transportation by ship. Dead larvae of fruit moths, C. punctiferalis and Grapholita molesta were found during cold storage. Quarantine pathogens were not found, but non-quarantine ones such as Penicillium sp. was infected through wounds by bruises and stabs resulted from sorting procedures. Because of the wounding problem during export procedures, pear fruits with thin exocarp, such as fruits of P. pyrifolia Nakai cv. Whangkeumbae, are required more careful handling during fruit sorting and conveyance.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.573-581
• /
• 2005

The outbound containers in a container terminal are classified into a few groups by their weights and stacked separately in a yard for easy and efficient handling. In order to maintain the balance of a ship during loading, containers of heavier weight groups should be fetched out of a yard and loaded onto the ship before those of lighter weight groups. However, the weight information used to determine the weight group is usually imprecise. Therefore stacks will actually be filled with mixture of different weight groups and rehandlings are unavoidable during loading operation. This paper presents a method for estimating the number of rehandlings caused by imprecise information and a scheme for generating a simple but efficient slot assignment rule. Experiments have shown that a rule generated by the proposed method can reduce the number of rehandlings by about $20\%$ compared to the traditional slot assignment method which stacks only the containers of the same weight group in a single stack.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.391-398
• /
• 2005

The outbound containers in a container terminal are classified into a few groups by their weights and stocked separately in a yard for easy and efficient handling. In order to maintain the balance of a ship during loading, containers of heavier weight groups should be fetched out of a yard and loaded onto the ship before those of lighter weight groups. However, the weight information used to determine the weight group is usually imprecise. Therefore stacks will actually be filled with mixture of different weight groups and rehandlings are unavoidable during loading operation. This paper presents a method for estimating the number of rehandlings caused by imprecise information and a scheme for generating a simple but efficient slot assignment rule. Experiments have shown that a rule generated by the proposed method can reduce the number of rehandlings by about 20%compared to the traditional slot assignment method which stacks only the containers of the same weight group in a single stack.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.403-408
• /
• 2007

The purpose of this paper is to show a way for measuring the rankings of efficient seaports in Korea by using DEA(data envelopment analysis) and model suggested by Jahanshahloo et al(2006). Two inputs(birthing capacity, and cargo handling capacity) and three outputs(export cargo handling amount, import cargo handling amount, and number of ship calls), and one cross sectional data(2004) for 26 Korean seaports are considered for measuring the efficiencies. An empirical main result indicates that ranking order of efficient seaports are Okpo, Samcheok Ulsan, Daesan, Busan, Gohyun Ports. Samcheok Port is classified as the most strong efficient port among 16 general ports except 10 container ports. The Korean seaport authority can adopt the new measurement way introduced in this paper for measuring the exact ranking order of efficient seaports when it decides the development and investment to each efficient seaport.

• Journal of Korea Port Economic Association
• /
• v.23 no.2
• /
• pp.109-120
• /
• 2007

The purpose of this paper is to verify the two problems(normalization for the different inputs and outputs data, translation invariant for the negative data) which will be occurred in measuring the seaport DEA(data envelopment analysis) efficiency. The main result is as follow: Normalization and translation invariant in the BCC model for measuring the seaport efficiency by using 26 Korean seaport data in 1995 with two inputs(berthing capacity, cargo handling capacity) and three outputs(import cargo throughput, export cargo throughput, number of ship calls) was verified. The main policy implication of this paper is that the port management authority should collect the more specific data and publish these data on the inputs and outputs in the seaports with consideration of negative(ex. accident numbers in each seaport) and positive value for analyzing the efficiency by the scholars, because normalization and translation invariant in the data was verified.