• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.49-55
• /
• 2006

Kinematic GPS provides quite good accuracy of position in cm level. Though K-GPS assures high precision measurement in cm level on the basis of an appreciable distance between a station and an observational point, but it has measurable distance restriction within 20 km from a reference station on land. So it is necessary to make out a simple and low-cost method to obtain accurate positioning information without distance restriction. In this paper, the velocity integration method to get the precise velocity information of ship is explained. Next two experimental results (Zig-zag maneuvering test and Williamson turn) as the ship's maneuvering test and also the experimental results of leaving and entering port as slow speed ship's movement were shown. In these experimental results, ship's course, speed and position are compared with those obtained by kinematic-GPS, velocity integration method and dead reckoning position using Gyro-compass and Doppler-log.

• 동력기계공학회지
• /
• 제14권5호
• /
• pp.48-55
• /
• 2010

When a large ship is advancing in waves, ship undergoes the hydroelastic response, which has influences on structural stability and the fatigue destruction etc. of the ship. Therefore, to predict accurate hydroelastic response, it is necessary to analyze hydroelastic response including fluid-structure interaction. In this research, a ship is divided into many hull elements to calculate the fluid forces and wave exciting forces on each elements using three-dimensional source distribution method. The calculated fluid forces and wave exciting forces are assigned to nodes of hull elements. The neighbor nodes are connected with elastic beam elements. We analyzed hydroelastic responses, and those are formulated by using finite element method. Particularly, to estimate the influence of forward speed on the hydroelastic responses, we use two different methods : Full Hull Rotation Method(FHRM) and Sectional Hull Rotation Method(SHRM).

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 추계학술대회
• /
• pp.37-39
• /
• 2015

The ships transiting the Northern Sea Route (NSR) have been gradually increased so that the number of ship-ice collision accidents would be increased. The collision between ship and ice floe can lead to serious damage of hulls and decline of ship's maneuverability. In this study, collision tests that a model ship is forced to collide with disk-shaped synthetic ice floes are conducted in a towing tank. The synthetic ice floes made of polypropylene which has similar density with real ice are used. The ice load is measured by a load cell installed on the carriage rod. The ice floe's motion is measured by a motion sensor installed on the synthetic ice floe. The influences of contact conditions such as hull form and ship speed on the ship-ice collision response are investigated and discussed by measured peak force and ice floe's motion.

• 한국해양공학회지
• /
• 제34권6호
• /
• pp.377-386
• /
• 2020

This paper discusses the effectiveness of onboard measurements and data extracted from weather information for speed-power analysis. Furthermore, validation results of hull and propeller cleaning and painting during dry-docking are discussed. Wind and wave information can be obtained from onboard measurements or weather information from the National Oceanic and Atmospheric Administration (NOAA). The weather information of a specified position and time is extracted from NOAA weather data and compared with onboard measurements. In addition, to validate the effects of hull cleaning and painting during dry-docking, speed-power analysis results of before and after dry-docking are compared. The results show that both onboard measurements and weather information show acceptable reliability when added resistance and speed-power analysis results are compared with each other. Moreover, the ship performance analysis (SPA) software clearly shows the effects of hull cleaning and painting, and it can provide reliable analysis results with either onboard measurements or weather information. In conclusion, it is confirmed that the analysis method and SPA software used in this study are effective in analyzing the ship's speed-power performance.

• 해양환경안전학회지
• /
• 제30권2호
• /
• pp.209-216
• /
• 2024

연안여객선 현대화계획에 따라 건조된 카페리여객선이 제주항 입항 시 다른 선박과 충돌 또는 부두와 접촉한 사고가 2020~2022년 사이에 4건 발생하였다. 사고는 주로 예선 없이 선수 및 선미 스러스터를 이용한 자력도선 중 조선 부주의와 바람에 의한 선박의 압류로 발생하였다. 이에 본 연구에서는 카페리여객선 H호를 중심으로 충돌사고를 분석하고, 선박이 접안 중 발생하는 외력과 모멘트에 따라 선박이 예선 없이 자력으로 부두와 평행하게 접안하기 위한 스러스터 및 엔진의 소요출력을 기반으로 자력으로 선박을 제어할 수 없는 한계풍속과 풍속 증가에 따른 추가적인 예선의 운영방안을 제시하였다. H호의 적재상태, 접안속도에 따른 자력 또는 예선 사용 시 한계풍속을 상대풍향별로 분석한 결과, 제주항 접·이안 시 횡방향 풍속이 10m/s 이상일 때 예선 1척을 선미에 사용하고, 횡방향 풍속이 14m/s 이상일 때에는 예선 2척을 사용 것이 타당할 것으로 판단된다.

• 해양환경안전학회지
• /
• 제3권1호
• /
• pp.93-98
• /
• 1997

When navigating at sea, informations like other ship's particular are very important to navigator who should make a safe maneuvering. Most of all is obtained through the optical observation and/or the radiotelephone communication, but it is not easy to perceive them when the visibility is restricted or there is some hardness in communication. In this study, we suggest the algorithm that measures the ship's length and speed on the radar screen and estimates the ship's particular such as gross tonnage, breath and type on the base of above two factors.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2004년도 추계학술발표회
• /
• pp.43-47
• /
• 2004

두 개의 다른 위성 센서 (RADARSATSAR와 KOMPSAT EOC)를 사용하여 선박탐지 실험을 실시하였으며, 탐지성능을 검토하였다. 목포항과 울산항을 대상으로 실시하였으며 필요에 따라 현장 검증 데이터를 얻기 위하여 위성 통과 시에 선박에 승선하여 선박정보를 포함하는 Sea Truth를 취득하였다. 또한 VTS레이더 정보를 위성데이터와 비교를 통하여 위치정보의 검증을 수행하였다. 광학과 마이크로파 원격탐사에 있어 그 특성의 차이는 뚜렷하였으나, 광학의 경우 선속 3.1kts 이상인 선박의 후류가 탐지되었으며, 마이크로파의 경우, 최대 6-7kts의 선박에 대해서도 후류의 탐지는 어려웠다. 그러나, 마이크로파는 다양한 선형을 반영한 신호가 sigma nought로 표현되므로 향후 선형 정보뿐만 아니라, 침로의 추출이 가능하다는 결론을 얻었다. 또한, 동일 선박이라 할지라도 신호강도의 차이에 의해 선박이 2개 이상으로 나타나는 현상도 파악되었다. 앞으로 다양한 해상환경 및 위성 관측 모드에 따른 추가 실험을 실시하여 자동 선박추출이 가능할 것으로 판단된다.

• 해양환경안전학회지
• /
• 제24권1호
• /
• pp.36-42
• /
• 2018

이 연구는 운항자가 항해 중 위험을 느끼는 고정 및 이동 물표에 대한 해상교통위험성평가에 대한 것이다. 이를 위해 선박 길이와 속력, 선박조종성능이 고려된 동적선박영역을 기초로 한 충돌위험평가식을 구하였다. 특히, 동적선박영역과 충돌위험평가식을 하이브리드 결합하여 자선의 크기, 속력 등의 영향을 정량적으로 지표화한 항해위험성평가모델을 검토 및 개선하고자 한 것이다. 기존 항해위험성평가 모델에 적용이 부족한 속장비(speed length ratio) 즉, 선박의 길이와 속력에 대한 비가 고려된 새로운 형태의 해상교통위험성평가 모델을 제안하고자 한다. 그 결과 무차원 속력 즉, 속장비가 클수록 CJ 값이 크며, CJ 값은 속장비에 의해 잘 표현되고 있다. 또한, 속장비가 크면 속장비가 작은 경우보다, 보다 먼 거리에서부터 [주의], [경계], [위험] 또는 [매우위험]상태에 도달한다. 이 연구의 결과는 위험항로 회피 또는 최적항로 구축, 방파제폭이나 교량경간 등을 포함한 항로나 항만개발, 연안항해용 안전해도 개발 및 향후 자율운항선박과 같은 스마트선박의 운항 중 충돌방지와 최적항로 선정에 자료로 사용될 수 있을 것이다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권3호
• /
• pp.36-42
• /
• 2008

The superconducting motor shows several advantages such as smaller size and higher efficiency against conventional motor especially utilized in ship propulsion application. However, this size reduction merit appears in large capacity more than several MW. We are going to develop a 5MW class synchronous motor with rotating High-Temperature Superconducting (HTS) coil. that is aimed to be utilized for ship propulsion so it has very low-speed, The ship propulsion motor must generate very high electromagnetic torque instead of low-speed. Therefore. the rotor (field) coils need very large magnetic flux that results in large amount of expensive HTS conductor for the field coil. In this paper a 5MW HTS motor for ship propulsion is considered to be designed with construction cost reduced via HTS field coil cost reduction because HTS conductor cost is critical factor in the construction cost of HTS motor. In order to reduce the HTS conductor amount. iron-cored rotor types are considered. so several cases with iron-core are compared one another and with an air-core case.

• Journal of Advanced Research in Ocean Engineering
• /
• 제3권3호
• /
• pp.102-111
• /
• 2017

This study considered the effects on the seabed of a harbor and quay wall from ship maneuvers in relation to the thruster jet flow and initial velocity. This study also included the engine capacity, RPM, and diameter and pitch of a ship's thruster for a required speed. The impact of a scour hole on the environment of a quay wall was investigated. Based on these results, a risk based analysis was conducted to evaluate different strategies and their consequences. There has been an increase in the loads on the bottom of a harbor during ship maneuvering. This increase is caused by the propeller loads of mooring and unmooring vessels. This indicates a greater number of arrivals and departures of vessels with larger drafts, larger thruster diameters, and larger available thruster power capacities. Another important cause could be an increase in the maneuverability of vessels from the use of bow thrusters. The increasing loads, which cause a higher jet flow above the bottom, can lead to undesirable scour holes.