• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.34-42
• /
• 1998

This paper describes an analysis of measuring error of on the machine measuring(OMM) system which directly measures machined surface dimensions using scanning probe on a CNC milling machine. 21 inch TV shadow mask mould clamped to a pallet was measured using PTP(point to point) measuring algorithm in OMM system and the results were compared with those using coordinate measuring machine(CMM). The OMM error was evaluated by probe error, stylus contact error, center shift error, repeatability, work-piece clamping error and etc. The results show that elastic deformation of the pallet is most affecting factor on the measuring error, thus pallet design and clamping method need very careful cosiderations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.435-440
• /
• 2011

A touchless user interface system is proposed for real-time mobile devices in this work. The proposed system first recognizes the position of pattern to interact various applications based on the scene taken from mobile camera. Then, the proposed system traces the route of the pattern, which estimates the motion of pattern based on the mean-shift method. Based on this information, we control menu and keypad for the various applications. Differ from other user interface systems, the proposed system provides the new experience to even for the user of low-end mobile without additional hardware. Simulation results demonstrate that the proposed algorithm provides better interaction performances than the conventional method, while achieving real-time user interacting for mobile devices.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3585-3601
• /
• 2016

The error rate performance of circularly distributed antenna system is studied over Nakagami-m fading channels, where a dual-channel receiver is employed for the quadrature phase shift keying signals detection. To mitigate the Co-Channel Interference (CCI) caused by the adjacent cells and to save the transmit power, this work presents remote antenna unit selection transmission based on the best channel quality and the maximized path-loss, respectively. The commonly used Gaussian and Q-function approximation method in which the CCI and the noise are assumed to be Gaussian distributed fails to depict the precise system performance according to the central limit theory. To this end, this work treats the CCI as a random variable with random variance. Since the in-phase and the quadrature components of the CCI are correlated over Nakagami-m fading channels, the dependency between the in-phase and the quadrature components is also considered for the error rate analysis. For the special case of Rayleigh fading in which the dependency between the in-phase and the quadrature components can be ignored, the closed-form error rate expressions are derived. Numerical results validate the accuracy of the theoretical analysis, and a comparison among different transmission schemes is also performed.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.145-152
• /
• 2013

Objective: The aim of this study is to develop an ergonomic office chair that has an alarm function for the unbalanced sitting postures. Background: Contrary to expectation, it is reported that office workers sit on their chairs much more in unbalanced postures during daily work. Even though an office worker uses an ergonomically good-designed chair and begins their work in a good sitting posture, his/her posture is likely to shift to the unbalanced bad posture. Therefore, a posture alarm system would be very helpful in keeping office workers' good postures. Method: We developed a prototype chair with four load cells under a seat pan and one load cell beneath a backrest. Through some experiments, we set the criteria for unbalanced bad postures then implemented the criteria into the alarm system of the prototype chair. The chair called e-BASE chair could detect unbalance postures and show alarms for chair users. We also enhanced back support by developing a step-wised folding backrest. Results: The e-BASE chair showed better performance in interface pressure distributions and balanced posture ratio in VDT work. Conclusion: The ergonomic chair with posture alarm function(e-BASE chair) was developed. It showed better performance in seat pressure distribution and in keeping good posture during office work. Application: The posture alarm system and folding backrest can be applied to the new models of office chair.

• Fire Science and Engineering
• /
• v.21 no.1 s.65
• /
• pp.7-18
• /
• 2007

This research intended to show a reasonable way to improve working conditions of fire officers in Korea. It shows that fire officers have dignity of their social roles even though they have the unfairness in a work time, rewards, promotions and opportunities of overseas training compared with those of other government officers. The unfairness needs to be solved. In addition, there are more demands in fire fighters, but part of a regional government system already composed of 64.06% of fire officers, which means, there are too many fire fighters in one regional government. Therefore, it is difficult to employ more fire fighters. This is one of barriers to prevent from improvement of the working conditions. To improve the working conditions and to overcome the barriers, there are important solutions to counter the problems. Those are application of alternative policies and systems. Compared with the employment system and workload of fire officers in USA, Japan and other advanced countries, it is necessary to introduce alternative policies which include operation of partial three-shift system, expansion of oversees training, expansion of rotational-off system and improvement of employees' welfare policies.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.17
• /
• pp.7169-7174
• /
• 2014

Background: NPAS2 is a product of the circadian clock gene. It acts as a putative tumor suppressor by playing an important role in DNA damage responses, cell cycle control and apoptosis. Chronic lymphocytic leukemia (CLL) appears to be an apoptosis related disorder and alteration in the NPAS2 gene might therefore be directly involved in the etiology of CLL. Here, the Ala394Thr polymorphism (rs2305160:G>A) in the NPAS2 gene was genotyped and melatonin concentrations were measured in a total of seventy-four individuals, including thirty-seven CLL cases and an equal number of age- and sex-matched healthy controls in order to examine the effect of NPAS2 polymorphism and melatonin concentrations on CLL risk in a Pakistani population. Materials and Methods: Genotyping of rs2305160:G>A polymorphism at NPAS2 locus was carried out by amplification refractory mutation system-polymerase chain reaction (ARMS-PCR). Melatonin concentrations were determined by enzyme linked immunosorbent assay (ELISA). Statistical analysis was performed using Statistical Package for Social Sciences software. Results: Our results demonstrated no association of the variant Thr genotypes (Ala/Thr and Thr/Thr) with risk of CLL. Similarly, no association of rs2305160 with CLL was observed in either females or males after stratification of study population on a gender basis. Moreover, when the subjects with CLL were further stratified into shift-workers and non-shift-workers, no association of rs2305160 with CLL was seen in either case. However, significantly low serum melatonin levels were observed in CLL patients as compared to healthy subjects (p<0.05). Also, lower melatonin levels were seen in shift-workers as compared to non-shift-workers (p<0.05). There was no significant difference (p>0.05) in the melatonin levels across NPAS2 genotypes in all subjects, subjects with CLL who were either shift workers or non-shift-workers. General Linear Model (GLM) univariate analysis revealed no significant association (p>0.05) of the rs2305160 polymorphism of the NPAS2 gene with melatonin levels in any of the groups. Conclusions: While low melatonin levels and shift-work can be considered as one of the risk factors for CLL, the NPAS2 rs2305160 polymorphism does not appear to have any association with risk of CLL in our Pakistani population.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.186-191
• /
• 2017

An integrated pressure-sensor system was developed using the sensor-conditioning processes, which resulted in the optimum sensitivity of the pressure-sensor through the signal amplification, noise reduction, and level shift. Due to the specified characteristics among the components, such as operation range, the sensor output was generally limited compared to the full scale of the reading when coupled with other parts. Devices fabricated exhibited comparable characteristics with higher pressure sensitivity to that of the pressure sensor without sensor-conditioning process. In this work, the sensor resolution was at least enhanced at least by 25% using the sensor-conditioning processes.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.916-917
• /
• 2008

In this paper, Switching damage of switches that is used to proposed power conversion system is reduced by soft switching way. dissipation by part resonance and my resonance stress for resonance of resonance circuit are decreased. Is acted by conversion system high effectiveness. Have following characteristic. Design snubber circuit that is used by switch protection in existent hard work rate Topology by resonant circuit for sogt switching, circuit structure was simple and control system is easy. Also, Can generate free output voltage by multi level Tuesday of output that use individuation Power Cell's Phase Shift PWM, and Low-end switching frequency the harmonic is few.

• Journal of Korean Clinical Nursing Research
• /
• v.18 no.1
• /
• pp.63-73
• /
• 2012

Purpose: The purpose of this study was to compare job satisfaction and nursing performance of nurses on fixed night shifts (FNS) and nurses working three shifts (W3S), to identify the environment of night work and recognition of the viability of the FNS system. Methods: The research was conducted with 106 nurses on FNS and 257 on W3S. The nurses had worked for 1 to 11 years at A hospital, Seoul. Results: Job satisfaction was significantly higher (t=-3.51, p< .001) for nurses on FNS. However, no significant difference was found for nursing performance (t=-1.019, p=.309) between the two groups. Both groups of nurses were mostly satisfied. Subjective fatigue scores (0 to 10 points) during the night for nurses on FNS (6.02) were lower than for W3S nurses (7.28) A high percentage (88.7%) of nurses on FNS indicated a willingness to further participate in FNS. Conclusion: Results indicate that the demonstration FNS system showed its effectiveness. Therefore, efforts are needed to enhance and revitalize FNS and to upgrade the system to control patient transfer time from emergency departments to wards, and to provide nurses needed resources for emergency or intensive care.

• Nuclear Engineering and Technology
• /
• v.49 no.6
• /
• pp.1125-1134
• /
• 2017

In this paper, we present a new multilevel in space and energy diffusion (MSED) method for solving multigroup diffusion eigenvalue problems. The MSED method can be described as a PI scheme with three additional features: (1) a grey (one-group) diffusion equation used to efficiently converge the fission source and eigenvalue, (2) a space-dependent Wielandt shift technique used to reduce the number of PIs required, and (3) a multigrid-in-space linear solver for the linear solves required by each PI step. In MSED, the convergence of the solution of the multigroup diffusion eigenvalue problem is accelerated by performing work on lower-order equations with only one group and/or coarser spatial grids. Results from several Fourier analyses and a one-dimensional test code are provided to verify the efficiency of the MSED method and to justify the incorporation of the grey diffusion equation and the multigrid linear solver. These results highlight the potential efficiency of the MSED method as a solver for multidimensional multigroup diffusion eigenvalue problems, and they serve as a proof of principle for future work. Our ultimate goal is to implement the MSED method as an efficient solver for the two-dimensional/three-dimensional coarse mesh finite difference diffusion system in the Michigan parallel characteristics transport code. The work in this paper represents a necessary step towards that goal.