• 한국재난정보학회 논문집
• /
• 제20권1호
• /
• pp.1-12
• /
• 2024

연구목적:본 연구는 최근 들어 적용이 확대되고 있는 Shield 및 TBM터널의 유지관리계측 관리 기준을 설정하여 터널 유지관리계측 관리기술을 향상시키고자 한다. 연구방법: 국내 Shield 및 TBM터널인 서울지하철 7호선, 9호선, 분당선, 국외의 프랑스, 일본, 영국의 채널터널 자료와 국내외의 터널 모형실험 사례를 종합적으로 분석하여 상호 비교를 실시한다. 연구결과: Shield 및 TBM 터널의 유지관리계측 단면 중 단면설계나 단면해석 등의 수치해석 결과에 의한 설계 예상치가 없는 경우의 유지관리계측 관리기준을 설정한다. 결론: 계측 관리기준 적용 시 각각의 계측항목 뿐만 아니라 전체 항목의 변화추이와 상관관계, 그리고 터널의 변상 등을 종합적으로 고려하여 안전성 여부를 판정하여야 한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.25-32
• /
• 2001

Doosan Construction & Engineering Co., Ltd is building a railway tunnel beneath the Soo-Young River connecting MinLak Station and Centum City Station, a section 230, subway line 2, Pusan City, Korea. When completed the tunnel will have a finished inner diameter of 6.5m(21.311) throughout its total length of 840m(420m = 0.52 miles, Two Single Track Tunnel : 420m＋420m). The ground profile of the face toward shield machine is composed of multi layers, silty clay, clayey gravel, soft rock etc. This research paper is to predict ground deformation and variation of stresses around tunnel using Hyperbolic model, and to reflect the works on the next shield tunneling project. And this research paper is analyzed data of measuring instrument (such as settlement gauge, inclinometer, Multiple extensometer, etc.) which is installed along tunnel line for safety of tunnel. For calculations, the finite difference Method is applied. Backfill grouting material is supposed to have instantly strength of 10kg/$\textrm{cm}^2$ above, although its strength is available after 24 hours passed.

• 터널과지하공간
• /
• 제21권6호
• /
• pp.427-438
• /
• 2011

세그먼트 라이닝은 쉴드터널에서 공사 중의 안정성을 확보하고 영구적인 터널 라이닝으로 사용되는 중요한 구조체이다. 더욱이 세그먼트 라이닝은 쉴드터널의 공사비에서 가장 큰 비중을 차지하기 때문에, 세그먼트의 경제성 향상을 위한 기술적인 개선 노력들이 이루어지고 있다. 따라서 본 연구에서는 경제적인 세그먼트 라이닝의 시공을 위한 고성능 세그먼트의 최신 개발 동향을 조사 및 분석하여 세그먼트의 기술개발 방향을 제시하고자 하였다. 또한 설계단계에서 세그먼트의 주요 설계사항들을 개략적으로 추정하는데 활용하기 위하여, 전 세계 2,100여개 세그먼트 자료들을 조사하고 이를 기반으로 세그먼트 라이닝 외경, 세그먼트 주요 형상치수 및 세그먼트 재질들에 대한 통계분석을 실시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.353-364
• /
• 2011

This paper presents the ground behaviour of shield TBM lunching area during excavation. In order to perform this study, a scaled model test was carried out in the 1/45 scale for a field tunnel in practice where the tunnel had about 7.8 m diameter at Seoul Metro Line 9 construction site. The test to simulate earth pressure balance (EPB) shield TBM tunnelling at the lunching area was conducted with the developed small scaled shield TBM machine. Measurements were performed during simulation of excavation for total jacking thrust force, ground displacements and pressures. Based on the analysis of simulation results, the stability of ground was verified and evaluated. In particular, the suitable reinforcement range and methods are also suggested. In addition, these results are useful for engineers and technicians to select suitable and serviceable machine operation parameters and reduce environmental influence at all stages of tunnel construction.

• 한국터널지하공간학회 논문집
• /
• 제8권3호
• /
• pp.197-204
• /
• 2006

대단면 쉴드 TBM을 이용한 터널굴착공법은 여러 기계화 시공법과 함께 향후 터널 연장의 장대화 추세에 부합하여 국내 활용도가 더욱 높아질 것으로 예상되는 터널 굴착공법이다. 특히 쉴드공법은 지반조건이 열악한 얕은 심도의 터널에 적용성이 우수한 공법으로 인식되고 있으나, 부적절한 장비선정, 터널 시공중 장비결함, 예상치 못한 지반조건 조우 등의 문제로 인하여 시공 중 사고 트러블 사례가 종종 발생되고 있다. 특히 터널막장에서의 트러블 발생 빈도가 매우 높아, 안정적이고 효율적인 굴착을 위해서는 굴착중 막장압 관리가 매우 중요하다. 따라서 본 연구에서는 터널막장의 안정화를 위한 이론적 막장지보압 산정방법의 고찰과 수치해석적 방법에 의한 지보압에 따른 지반거동 양상을 비교 분석 하였다.

• 한국터널지하공간학회 논문집
• /
• 제21권5호
• /
• pp.611-620
• /
• 2019

쉴드터널은 직경 3~4 m 규모의 전력구 등에 주로 적용되었으나, 최근 직경 7~8 m 규모의 쉴드터널이 인천국제공항 활주로 하부에 시공되었으며, 한강 하저구간 도로 및 철도터널 시공완료 및 계획중에 있다. 쉴드터널 단면이 증가함에 따라 세그먼트 또한 대형화되고 있으며, 이로 인하여 세그먼트의 설계, 시공 및 성능평가 시 여러 문제점이 야기되고 있다. 따라서 본 연구에서는 직경 약 8 m 규모의 쉴드터널에 대한 현장계측 및 실대형 하중재하 시험을 통하여 쉴드터널 세그먼트 라이닝 구조적 안정성 분석, 축력을 고려한 세그먼트 사용성 검토방안의 적합성 및 품질관리 방안에 대하여 검토하였다.

• Geomechanics and Engineering
• /
• 제30권4호
• /
• pp.325-336
• /
• 2022

This paper analyzes the ground surface settlements induced by side-by-side twin shield tunnels bored in sedimentary soils, which primarily consist of sand with clay strata above the tunnel crown. The measurements were obtained during the construction of twin tunnels underneath the Incheon International Airport (IIA) located in Korea. The measured surface settlement troughs are approximated with Gaussian functions. The trough width parameters i and K of the settlement troughs produced by the first and second tunnel passings are determined, along with those for the total settlement trough. The surface settlement troughs produced by the first shield passing are reasonably represented by a symmetric Gaussian curve. The surface settlement troughs induced by the second shield tunnel display marginal asymmetric shapes at selected sections. The total settlement troughs are fitted both with a shifted symmetric Gaussian function and the superposition method utilizing an asymmetric function for the incremental trough produced by the second tunnel. It is revealed that the superposition method does not always produce better fits with the total settlement. Instead, the shifted symmetric Gaussian function is overall demonstrated to provide more favorable agreements with the recordings. Therefore, the shifted symmetric Gaussian function is recommended to be used in the design for the prediction of the settlement in clays caused by twin tunneling considering the simplicity of the procedure compared with the superposition method. The amount of increase in the width parameter K for the twin tunnel relative to that for the single tunnel is quantified, which can be used for a preliminary estimate of the surface settlement in clay induced by twin shield tunnels.

• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.693-707
• /
• 2019

This paper proposes an integrated safety assessment method that can take multiple sources data into consideration based on a data fusion approach. Data cleaning using the Kalman filter method (KF) was conducted first for monitoring data from each sensor. The inclination data from the four tilt sensors of the same monitoring section have been associated to synchronize in time. Secondly, the finite element method (FEM) model was established to physically correlate the external forces with various structural responses of the shield tunnel, including the measured inclination. Response surface method (RSM) was adopted to express the relationship between external forces and the structural responses. Then, the external forces were updated based on the in situ monitoring data from tilt sensors using the extended Kalman filter method (EKF). Finally, mechanics parameters of the tunnel lining were estimated based on the updated data to make an integrated safety assessment. An application example of the proposed method was presented for an urban tunnel during a nearby deep excavation with multiple source monitoring plans. The change of tunnel convergence, bolt stress and segment internal forces can also be calculated based on the real time deformation monitoring of the shield tunnel. The proposed method was verified by predicting the data using the other three sensors in the same section. The correlation among different monitoring data has been discussed before the conclusion was drawn.

• Structural Engineering and Mechanics
• /
• 제65권6호
• /
• pp.741-750
• /
• 2018

The aim of this study was to investigate the mechanical responses of a high-speed railway shield tunnel subjected to impact by a derailed train, with emphasis on the protective effect of the secondary lining. To do so, the extended finite element method was used to develop two numerical models of a shield tunnel including joints and joint bolts, one with a cast-in-situ concrete secondary lining and one without such a lining. The dynamic responses of these models upon impact were analyzed, with particular focus on the distribution and propagation of cracks in the lining structures and the mechanical responses of the joint bolts. The numerical results showed that placing a secondary lining significantly constricted the development of cracking in the segmental lining upon the impact load caused by a derailed train, reduced the internal forces on the joint bolts, and enhanced the safety of the segmental lining structure. The outcomes of this study can provide a numerical reference for optimizing the design of shield tunnels under accidental impact loading conditions.

• Geomechanics and Engineering
• /
• 제17권1호
• /
• pp.97-107
• /
• 2019

Based on the results of Han et al. (2016), in the failure zone ahead of the tunnel face it can be obviously identified that a shear failure band occurs in the lower part and a pressure arch happens at the upper part, which was often neglected in analyzing the face stability of shield tunnel. In order to better describe the collapse failure feature of the tunnel face, a new improved failure mechanism is proposed to evaluate the face stability of shield tunnel excavated in layered soils in the framework of limit analysis by using spatial discretization technique and linear interpolation method in this study. The developed failure mechanism is composed of two parts: i) the rotational failure mechanism denoting the shear failure band and ii) a uniformly distributed force denoting the pressure arch effect. Followed by the comparison between the results of critical face pressures provided by the developed model and those by the existing works, which indicates that the new developed failure mechanism provides comparatively reasonable results.