Browse > Article
http://dx.doi.org/10.12989/sem.2018.65.6.741

Dynamic responses of shield tunnel structures with and without secondary lining upon impact by a derailed train  

Yan, Qixiang (Key Laboratory of Transportation Tunnel Engineering, Ministry of Education, Southwest Jiaotong University)
Li, Binjia (Key Laboratory of Transportation Tunnel Engineering, Ministry of Education, Southwest Jiaotong University)
Deng, Zhixin (Key Laboratory of Transportation Tunnel Engineering, Ministry of Education, Southwest Jiaotong University)
Li, Bin (The Third Railway Survey and Design Institute Group Corporation)
Publication Information
Structural Engineering and Mechanics / v.65, no.6, 2018 , pp. 741-750 More about this Journal
Abstract
The aim of this study was to investigate the mechanical responses of a high-speed railway shield tunnel subjected to impact by a derailed train, with emphasis on the protective effect of the secondary lining. To do so, the extended finite element method was used to develop two numerical models of a shield tunnel including joints and joint bolts, one with a cast-in-situ concrete secondary lining and one without such a lining. The dynamic responses of these models upon impact were analyzed, with particular focus on the distribution and propagation of cracks in the lining structures and the mechanical responses of the joint bolts. The numerical results showed that placing a secondary lining significantly constricted the development of cracking in the segmental lining upon the impact load caused by a derailed train, reduced the internal forces on the joint bolts, and enhanced the safety of the segmental lining structure. The outcomes of this study can provide a numerical reference for optimizing the design of shield tunnels under accidental impact loading conditions.
Keywords
train impact load; assembled-segmental lining; fracture mechanics; crack characteristics of lining concrete; dynamic responses;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Yan, Q.X., Xu, Y.J., Zhang, W.L., Geng, P. and Yang, W.B. (2018), "Numerical analysis of the cracking and failure behaviors of segmental lining structure of an underwater shield tunnel subjected to a derailed high-speed train impact", Tunnel. Undergr. Space Technol., 72, 41-54.   DOI
2 Yan, Q.X., Li, B., Geng, P., Chen, C., He, C. and Yang, W.B. (2016), "Dynamic response of a double-lined shield tunnel to train impact loads", Tunnel. Undergr. Space Technol., 53, 33-45.   DOI
3 Yan, Q.X., Yao C.F., Yang W.B., He, C. and Geng, P. (2015), "An improved numerical model of shield tunnel with double lining and its applications", Adv. Mater. Sci. Eng., 2015, 1-15.
4 Zhao, H., Liu, X., Bao, Y. and Yuan, Y. (2017), "Nonlinear simulation of tunnel linings with a simplified numerical modeling", Struct. Eng. Mech., 61(5), 593-603.   DOI
5 GB 50010 (2010), Design of Concrete Structures, Ministry of Housing and Urban-Rural Development of the People's Republic of China, Beijing, China.
6 Gupta, N.K. and Venkatesh. (2006), "A study of the influence of diameter and wall thickness of cylindrical tubes on their axial collapse", Thin. Wall. Struct., 44(3), 290-300.   DOI
7 Hong, S.T., Pan, J., Tyan, T. and Prasad, P. (2008), "Dynamic crush behaviors of aluminum honeycomb specimens under compression dominant inclined loads", J. Plast., 24(1), 89-117.   DOI
8 Koizumi, A. and He, C. (2000), "Dynamic behavior in longitudinal direction of shield tunnel located at irregular ground with considering effect of secondary lining", Strain, 70(2), 1-9.
9 Milho, J.F., Ambrosio, J.A.C. and Pereira, M.F.O.S. (2003), "Validated multibody model for train crash analysis", J. Crashworth., 8(4), 339-352.   DOI
10 Moes, N. and Belytschko, T. (2002), "Extended finite element method for cohesive crack growth", Eng. Fract. Mech., 69(7), 813-833.   DOI
11 Yan, Q.X., Deng, Z.X., Zhang, Y.Y. and Yang, W.B. (2017), "Failure characteristics of joint bolts in shield tunnels subjected to impact loads from a derailed train", Shock Vibr., 2017(9), 1-17.
12 Moes, N., Dolbow, J. and Belytschko, T. (1999), "A finite element method for crack growth without remesh-ing", J. Numer. Meth. Eng., 46(1), 131-150.   DOI
13 Takamatsu, N., Murakami, H. and Koizumi, A. (1992), "A study on the bending behavior in the longitudinal direction of shield tunnels with secondary linings", Proceedings of the ITA Congress Towards New Worlds in Tunnelling, Acapulco, Mexico, May.
14 Xie, S.C. and Zhou, H. (2014), "Impact characteristics of a composite energy absorbing bearing structure for railway vehicles", Compos. Part B-Eng., 67, 455-463.   DOI
15 Fang, X.J., Jin, F. and Wang, J.T. (2007), "Simulation of mixedmode fracture of concrete using extended finite element method", Eng. Mech., 24(z1), 46-52.
16 Zia, G., Chen, H., Xu, J. and Belytschko, T. (2005), "The extended finite element method for dynamic fractures", Shock Vibr., 12(1), 9-23.   DOI
17 Areias, P.M.A. and Belytschko, T. (2005), "Analysis of threedimensional crack initiation and propagation using the extended finite element method", J. Numer. Meth. Eng., 63(5), 760-788.   DOI
18 Baykasoglu, C., Sunbuloglu, E., Bozdag, S.E., Aruk, F., Toprak, T. and Mugan, A. (2011), "Railroad passenger car collision analysis and modifications for improved crashworthiness", J. Crashworth., 16(3), 319-329.   DOI
19 Belytschko, T. and Black, T. (1999), "Elastic crack growth in finite elements with minimal remeshing", J. Numer. Meth. Eng., 45(5), 601-620.   DOI
20 Cendon, D.A., Galvez, J.C., Elices, M. and Planas, J. (2000), "Modelling the fracture of concrete under mixed loading", J. Fract., 103(3), 293-310.
21 Gao, G.J. and Tian, H.Q. (2007), "Train's crashworthiness design and collision analysis", J. Crashworth., 12(1), 21-28.   DOI
22 Feng, K., He, C., Fang Y. and Jiang, Y. (2013), "Study on the mechanical behavior of lining structure for underwater shield tunnel of high-speed railway", Adv. Struct. Eng., 16(8), 1381-1399.   DOI