• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.525-534
• /
• 2017

The study aims to observe the cellular anatomical properties of Dahurian larch and Japanese larch for the species identification. In addition, other factors - the ring width, tracheid length, density, and strength - were compared and analyzed to clarify their physical and mechanical properties. To the end, three Dahurian larch trees and three Japanese larch trees by each diameter class were collected as specimens from Jeongseon-eup, Jeongseon-gun, Gangwon-do, to conduct a stem analysis. It was found that the average stand age, average diameter at breast height, and average tree height of three Dahurian larch trees and Japanese larch trees were 74 years and 51 years, 442 mm and 352 mm, and 26.1 m and 20.8 m, respectively. The cellular anatomical difference between Dahurian larch and Japanese larch can be usually found by spiral thickening, considering that it doesn't occur in Dahurian larch at all, while rarely does in the ray tracheids of Japanese larch. However, in this study, spiral thickening was not observed in the radial section of Japanese larch. The average annual growth diameters measured at 1.2 m-height of Dahurian larch and Japanese larch were 5.167 mm and 5.954 mm, respectively. Meanwhile, arboreal growth of Japanese larch was observed to be higher than that of Dahurian larch. In the physical properties test, it was measured that the latewood proportion and oven-dry density of Dahurian larch with low annual diameter growth were higher than those of Japanese larch, while the mechanical properties of Dahurian larch wood were measured 2-7% higher than those of Japanese larch wood. The data obtained from this study are expected to be used as the basic reference for species identification between Dahurian larch and Japanese larch by DNA analysis.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.585-592
• /
• 2002

This study was conducted to investigate the effect of nutrient level (metabolizable energy and crude protein, 2,843kcal/kg and 19.46% at 2 to 3 week, 3,072kcal/kg and 18.38% at 4 to 6 week, 3,109 kcal/kg and 17.26% at 7 to 8week, respectively, and feeding form was ground $\longrightarrow$ crumble $\longrightarrow$ pellet in control, ground $\longrightarrow$ crumble $\longrightarrow$ pellet in treatment 1, crumble $\longrightarrow$ crumble $\longrightarrow$ pellet in treatment 2, pellet $\longrightarrow$ pellet $\longrightarrow$ pellet in treatment 3 for broiler during 8 weeks. Also the effects of supplemented with charcoal(1%) in total mixed treatment feed was investigated. The crude protein, crude fat in broiler meat ranged from 22.22${\sim}$23.40%, and 0.30${\sim}$0.45%, respectively. Especially, treatment 2 was lower than other treatment (P<0.05). The heating loss tend to be increased at control. Shear force and pH tend to be decreased at T3(1.21kg, 5.89). Control and T2 were significantly lighter in color (‘L’) than the T1 and the ‘a’ ranged from 0.19${\sim}$0.85 and T1 was the lowest ‘b’ among other treatment. The panel test, texture, Aroma were not significantly among the an experimental group (P<0.05). Myristic acid and arachidonic acid of T1 was significantly higher than that other treatment and oleic acid, U/S(unsaturated/ saturated) rate T2 was significantly higher than other experimental group(P<0.05). Among amino acid, cystine, glutamic acid, valine, iso-leucine, leucine, lysine, arginine in T1 and T2 was higher than control and T3.

• Journal of Animal Science and Technology
• /
• v.44 no.3
• /
• pp.315-326
• /
• 2002

This study was conducted to examine the effects of Red clay(Hwangto) as feed additives with 26 Hanwoo steers at two regions for 540 days from six to 24 months of age on feed efficiency, meat quantity and meat quality. Feeding trial 1 was conducted with two treatment groups by five heads/treatment which were T1(Control) and T2(Control+ad libitum Hwangto) at National Livestock Research Institute. Feeding trial 2 was conducted with four treatment groups by four heads/treatment which were T1(Control), T2(Control+2% Hwangto), T3(Control+5% Hwangto) and T4(Control+ad libitum Hwangto) at a private Hanwoo breeding farm. In feeding trial 1, average daily gains by growing, fattening, finishing and over-all periods were 0.572, 0.866, 0.869 and 0.769kg in T1, and 0.537, 0.904, 0.857 and 0.766kg in T2, respectively. Average daily gain for growing and finishing period was high in T1 but in T2 for fattening period, which were not statistically significant. Also concentrates and TDN intakes per kg gains were not statistically significant by treatments. In carcass characteristic, dressed carcass and red meat percentage were high in T1 but in T2 for retailed cut percentage without significant difference. The yield index and shear force was 69 and 70, 4.4 and 6.1 kg/$cm^2$ in T1 and T2, respectively. In palatability traits, the panel test scores of juiciness, tenderness and flavor were 4.08 and 4.64, 3.42 and 3.96, 4.58 and 4.80 in T1 and T2, respectively. which showed a tendency to improvement in Hwangto feeding groups. In feeding trial 2, the range of average daily gains were 0.656(T6) to 0.772(T3), 0.937(T6) to 1.009(T5), 0.592(T3) to 0.675kg(T6) in growing, fattening and finishing period, respectively. Although it was high in T3, T5 and T6 at growing, fattening and finishing period, respectively, it was not significantly different by treatments. The ranges of concentrates and TDN intakes per kg gains were 8.71 to 9.50(average 9.05) and 7.52 to 7.64kg(average 7.55kg), they all were lower in Hwangto feeding groups than in control about 4.5 to 8.3% and 1.2 to 1.6%, respectively. In carcass characteristics, back-fat thickness, loin eye muscle area and yield index were not difference by treatments, but marbling scores were high in T5 and T6 than in percent. Summarizing above results, it may be concluded that the use of unprocessed Hwangto as feed additives for growing-fattening steers seems to improve meat quality but not red meat quantity and feed efficiency, and may be required to feed ad libitum during the finishing period.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.316-322
• /
• 2010

The research attempted to develop a wood adhesive based on waste cooking oil, using ozonification technology for the chemical structure modification. The waste cooking oil (WCO) was reacted with $O_3$ for different times; 1 h, 2 h, and 3 h. The chemical structure modifications of the ozonized WCOs were examined by Fourier transform Infrared (FT-IR) spectrum. The FT-IR spectrum of WCO had an absorbance peak at 3,010 $cm^{-1}$ that was the characteristic peak of the unsaturated double bonds. As ozone treatment time increased, the peak of the double bond was disappeared and carboxyl peak appeared at 1,700 $cm^{-1}$. Especially, the double bond of 3 hrs-ozonized WCO was vanished almost. In results of the dry bonding strengths of the 3 hrs-ozonized WCO mixed with polymeric methylene diphenyl diisocyanate (pMDI) were the strengths of weight ratio of 3hrs-ozonized WCO : pMDI, 1 : 0.5, 8.08 kgf/$cm^2$, 1 : 0.75, 9.53 kgf/$cm^2$ 1 : 1, 44.16 kgf/$cm^2$, 1 : 2, 58.08 kgf/$cm^2$, 1 : 3, 61.41 kgf/$cm^2$, and 1 : 4, 46.95 kgf/$cm^2$. Therefore, it was found that the optimum equivalent ratio was formed at the ratio of 1 : 2 or 1 : 3. Under wetting the bonding strength of 1 : 3 ratio was appeared higher than that of 1 : 2 ratio, while the results obtained from hot-water and cyclic boiling shear test were similar.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.2
• /
• pp.75-103
• /
• 2014

The Quaternary faults are extensively observed along major inherited fault zones (i.e. Yangsan Fault System, Ulsan Fault, Yeonil Tectonic Line, Ocheon Fault System) in SE Korea. Their geometry and kinematics provide a very useful piece of information about the Quaternary crustal deformation and stress field in and around Korean Peninsula. Using magnetic fabrics (AMS), we attempted to determine the slip senses of Jinti, Mohwa, Suseongji2, and Wangsan faults and then interpreted the fabric development process of fault gouge and the characteristics of stress field during the Quaternary. All the magnetic fabrics of the faults, except the Wangsan Fault, consistently indicate a dominant reverse-slip sense with weak strike-slip component. Most of the oblate fabrics are nearly parallel to the fault surface and the anisotropy degrees generally increase in proportion to the oblatenesses. These results suggest that the fabrics of the fault gouges resulted from a progressive deformation due to continuous simple shear during the last reactivation stage as reverse faulting. It is also interpreted that the pre-existing fabrics were overwhelmed and obliterated by the re-activated faulting. Paleostress field calculated from the fault slip data indicates an ENE-WNW compressive stress, which is in accord with those determined from previous fault tectonic analysis, focal mechanism solution, and hydraulic fracturing test in and around Korean Peninsula.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.593-606
• /
• 2005

Present study was conducted to investigate the optimal feeding levels for producing the high quality meat on the basis of the information deriving from the comparison of the growth performance and carcass characteristics among breeds(Holstein vs F1, Holstein♀×Hanwoo♂), sex(steer vs heifer) and interaction between breed and sex. Thirty two animals on 4 treatments(i.e. eight head each) were used for 540 days from seven to 24 months of age. The results obtained are summarized as follows; the range of average daily gains was 0.733 to 1.018, 0.994 to 1.255, 0.947 to 1.259 and 0.736 to 0.824kg for the growing, the early-fattening, the mid- fattening and the finishing periods, respectively. The range of average daily gains for the entire period was 0.882 to 1.061kg. The gains were higher for Holstein(7.3%) and the steers(10.5%) than F1 and the heifers, respectively. Concentrates and total digestible nutrients intakes per kg gain were higher for Holstein and the heifers than F1 and the steers, respectively. These findings may indicate that feed utilization is higher for Holstein than F1, and higher for the steers than the heifers. In carcass characteristics, back fat thickness was thicker for Holstein than F1, and rib-eye area was smaller for Holstein than F1. The rib-eye area per kg carcass weight was larger for F1 and the heifers than Holstein and the steers, respectively. Meat color was better for Holstein than F1, but the sex distinction did not show any differences. In physicochemical properties of longissimus dorsi, shear force, cooking loss, water holding capacity and the panel test scores of juiciness, tenderness and flavor for F1 and the heifers were better than those for Holstein and the steers, respectively. According to the above results, we may conclude that F1 and heifers rather than Holstein and steers are recommended for high quality meat production. In steers and heifers of Holstein and F1, the optimal feeding levels may be 1.9% of apparent body weight for concentrates and 25% of concentrates intake for rice straw.

• Food Science of Animal Resources
• /
• v.32 no.6
• /
• pp.835-841
• /
• 2012

This study was conducted to determine effect of dietary reduced antibiotics supplementation on carcass characteristics and meat quality of finishing pigs fed stevia and charcoal. A total of 180 pigs (LYD) were randomly allocated into 3 treatments with 3 replications. Dietary treatments were 1) T1 (control, basal diet, no stevia and charcoal addition, antibiotics both in early and late fattening periods), 2) T2 (basal diet, 0.3% stevia + 0.3% charcoal, antibiotics both in early and late fattening periods), 3) T3 (basal diet, 0.3% stevia + 0.3% charcoal, antibiotics in early fattening period only). At each marketing day, pigs were conventionally slaughtered, examined the carcass characteristics and loin (Longissimus) muscles were removed for the meat quality traits. In the carcass characteristics, T3 group showed higher incidence of A carcass grade compared to the other treatments. Backfat thickness was higher in T2 group compared to the others (p<0.05). In the meat quality traits, pH was higher in T1 group than T3 group (p<0.05). Cooking loss was higher in T2 group than T1 group (p<0.05). However, WHC (water holding capacity), drip loss and shear force values did not show any significant differences among treatments. In the panel test, there were no significant differences in tenderness, juiciness, flavor, and total acceptability scores among treatments. As a result, dietary supplementation of reduced antibiotics to finishing pigs fed stevia and charcoal showed similar growth performance and meat quality traits compared to conventional method.

• Korean Journal of Poultry Science
• /
• v.42 no.4
• /
• pp.335-345
• /
• 2015

This study was conducted to compare carcass yield and meat quality among four lines of Korean native chickens (Yeonsan Ogye, Hyunin Black, Hoengseong Yakdak and Hwangbong) and White Leghorn as control. Chickens (N=23, male) were grown under same conditions and slaughtered at 56 weeks old to observe the physicochemical differences in breast and leg meats. The live and carcass weights of Hwangbong were significantly higher than other chickens (p<0.05). Four lines of Korean native chickens, regardless of the part, had higher shear force value than White Leghorn (p<0.05). In addition, the breast meat of Korean native chickens had higher cooking loss and lower water holding capacity than that of White Leghorn. The cooked meat of Hwangbong particularly were more chewy, gummy and cohesive with lower tenderness than other chickens (p<0.05). Oleic acid content which is related to meat flavor was significantly higher in the breast meat of Hoengseong Yakdak (39.6%). The meat of Korean native chickens had lower n6/n3 ratio, in which the breast and leg meat of Hoengseong Yakdak contained the lowest ratio (p<0.05). The meat of Hwangbong and Hoengseong Yakdak were more acceptable than the others according to sensory test (p<0.05).

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.783-788
• /
• 2005

This study was conducted to investigate the optimal CP level in growing goat kids. Forty male goats were divided into four treatment groups fed diets containing CP 12, 14, 16, and 18% of concentrate feed, and rice straw, respectively. Results are summarized as follows. Average daily gain’s(ADG) of groups fed diets with CP 14% and CP 18% were 84.0 and 83.0g/d each, which were higher than group fed diets with CP 12% grown at 69.2g of ADG(P<0.05). Daily feed intakes of concentrate and rice straw were 590g and 45g each and there was no difference found between treatments. The amounts of feed required for body weight gain(g) were similar in the range of 7.0-7.3 for groups fed diets with CP 14%, 16% or 18%. But the group fed diets with CP 12% required somewhat more feed for gain at 8.8g. Dressing percentage of groups fed diet with CP 12% was 61.7%, which was higher than groups fed diets with CP 14% or CP 18%(P<0.05) but similar to that fed diet with CP 16%. Meat percentage from goats fed diet with CP 16% was 51.7%, which were higher than goats fed diets with CP 12% or CP 14%(P<0.05). Fat deposition of CP 12% group was higher than the other groups(P<0.05). Percentage of bone weight averaged 17.0% without any difference among treatment groups. Shear force and cooking loss, which are physical properties of goat meats, were lower in CP 16% and CP 14% groups than the other two groups. Water holding capacity of goats meats from CP 16% was higher than those from CP 18% group(P<0.05). Results from panel test showed that juiciness of meats from CP 16% group was higher than those from CP 12% group(P<0.05). Meats from CP 16% also was tested to be more tender than meats from the other groups. Results from this work suggest that the optimum crude protein level in growing goat's concentrate is 14-16% and that increase above this level seems not to improve meat production.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.377-385
• /
• 2011

This study was carried out to investigate quality characteristics of dry-cured hams in the domestic market. Two kinds of dry-cured hams were processed with pork leg (T1) and pork neck (T2). Five 24-month dry-cured legs (T1, 5.3-6.1 kg) and twenty 4-month dry-cured pork necks (T2, 1.5-1.9 kg) were used in this experiment. They were stored at $4^{\circ}C$ chilling room and quality characteristics were investigated. Moisture content, water activity, cholesterol content, CIE $L^*$, VBN, total plate counts and lactic acid bacteria of T1 were significantly higher (p<0.05) than those of T2, whereas fat content, ${NO_2}^-$, CIE $a^*$, TBARS and Warner-Bratzler shear force values of T2 were significantly higher (p<0.05) than those of T1. In fatty acid compositions, palmitoleic acid and stearic acid in T2 were significantly higher (p<0.05) than T1, however, oleic and linoleic acid in T2 was significantly lower (p<0.05) than T1. In free amino acids, the total content and individual content of asparagin, leucine and phenylalanine in T1 were higher than those of T2 (p<0.05). The aroma score of T2 was higher than that of T1 in sensory evaluation (p<0.05). In conclusion, two kinds of dry-cured hams were different in their final characteristics and could enhance the consumer's appeal of pork meat in Korean market.