• Food Science and Preservation
• /
• v.30 no.5
• /
• pp.875-884
• /
• 2023

In this study, the quality characteristics of texturized vegetable proteins (TVP) produced from defatted soy flour (DSF) were analytically compared with those of texturized vegetable proteins produced with isolated soy protein (ISP) and non-defatted soy flour (SF). The base raw material formulation consisted of 50% soy proteins, 30% gluten, and 20% corn starch. A cooling die-equipped extruder was used with a barrel temperature set at 190℃ and screw rotation speed of 250 rpm. With respect to the hardness of isolate soy proteins, that of soy flour and defatted soy flour was 22.4% and 68.8%, respectively, and gumminess was 17.6% and 44.3%, respectively. Defatting increased chewiness, shear strength, and springiness. Moisture content was higher in soy flour than in defatted soy flour, while there were no significant differences in terms of water absorption and turbidity. The pH was higher with soy flour than with defatted soy flour. Concerning color, the L and b values were higher with soy flour, while the a value was higher with defatted soy flour. These results suggest that defatting soybeans can improve the quality of plant-based proteins. Further research is needed to address the quality differences from those of isolated soy proteins.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.284-290
• /
• 2013

This study analyzed the geometric, compressive, cutting and friction properties of oriental melons in order to design a gripper capable of soft handling and a cutter for cutting oriental melon vine among the end effector of oriental melon as a preliminary step for developing the end effector of the robot capable of harvesting oriental melons in protected cultivation. As a result, the average length, diameter at the midpoint, weight, volume and roundness of the oriental melons were 108 mm, 70 mm, 188 g, 333 mL and 3.8 mm. Nonlinear regression analysis was performed on the equation $W=L^a{\times}D_2^b$ with variation of the length (L) and diameter (D2) of the weight (W) of the oriental melons. As a result, it was shown that there was a correlation between a of 2.0279 and b of -0.9998 as a constant value. The average diameter of the oriental melon vine was 3.8 mm, and most vines were distributed within a radius of 5 mm from the center. The average yield value, compressive strength and hardness of the oriental melons were $36.5N/cm^2$, $185.7N/cm^2$ and $636.7N/cm^2$, respectively. The average cutting force and shear strength of the oriental melon vines were $2.87{\times}10^{-2}\;N$ and $5.60N/cm^2$, respectively. The maximum friction coefficient of the oriental melons was rubber of 0.609, followed by aluminium of 0.393, stainless steel of 0.177 and teflon of 0.079. It was considered possible to apply it to the size of the gripper and cutter, turning radius, dynamics of drive motor and selection of materials and their quality in light of the position error and safety factor according to the movement when designing end effector based on the analyzed data.

• Journal of Life Science
• /
• v.18 no.11
• /
• pp.1521-1531
• /
• 2008

After pigs was fed by commercial diets supplemented with various concentrations (0, 0.5, 1, and 1.5%) of the fermented mushroom by-product of Pleurotus eryngii, the meat qualities and the serum lipid compositions of the individual pig groups were investigated. The levels of total lipid, total cholesterol, and triglyceride in the serum were significantly lower when the pigs were fed with the diet supplemented with 1.5% fermented mushroom by-product than those of the control pigs. HDL-, LDL-, and VLDL-cholesterol contents in the serum exhibited no significant difference between the pig group fed by the diet containing the fermented mushroom by-product and the control group. In comparison to the control group, the pig group fed by the diet supplemented with 1.5% fermented mushroom by-product showed significantly lower level of AI, CRF, GOT, and LDH values in the serum, whereas the difference in the level of antioxidant activity of the serum was not significant. Sensory evaluation regarding color, off-flavor, tenderness, juiciness, and overall acceptability also showed that the pork from the pig group fed by the diet supplemented with the fermented mushroom by-product ($0.5{\sim}1.5%$) was better than that from the control group. Although enhancement in the lghtness ($a^*$) value of the pork was significant in 20 days of storage at $4^{\circ}C$, the redness ($L^*$) value was not significantly differential during the storage periods regardless of the supplementation of the fermented mushroom by-product into the diet. The cooking loss of the pork from the pig group fed by the diet supplemented with the fermented mushroom by-product (1% and 1.5%) decreased in the storage 10 days, but it increased in the storage 20 days. After storage for 20 days at $4^{\circ}C$, shear force of the pork obtained from the pigs fed by the diet supplemented with $1%{\sim}1.5%$ fermented mushroom by-product appeared to become significantly lower than that of the control. There were, however, no significant changes between two groups in the level of moisture content, crude lipid, and pH during the storage period. Although the TBARS content was enhanced in all groups during the storage period, the enhancement appeared to be more significant in the pork from the pig group fed by the diet containing the fermented mushroom by-product in comparison to the control. On the other hand, the ratio of UFA/SFA for the pork obtained from the individual pig groups showed no considerable diet-associated alterations during the storage period.

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.171-180
• /
• 2008

This study was conducted to investigate the meat quality characteristics of pork loin in 3 crossbred groups (30 pigs/group). The crossbreeds were LY female${\times}$D male, Y female${\times}$B male and L female${\times}$B male (L: Landrace, Y: Yorkshire, B: Berkshire, D: Duroc). Pork loins were collected from animals ($110{\times}120kg$ body weight) slaughtered in a commercial slaughter house and stored at $-3^{\circ}C$. Samples were analyzed for general composition, physico-chemical properties, meat and fat color, texture characteristics, sensory evaluation and fatty acid composition at 24 hrs postmortem, and TBARS (Thiobarbituric Acid Reactive Substances) values were determined at various storage times. The LYD pigs showed a higher back fat thickness than the YB and LB pigs. There were no significant differences in intramuscular fat, intermuscular fat, subcutaneous fat and springiness among the 3 crossbreeds. In addition, there were no significant differences in general composition, pH, drip loss, cooking loss and cooked sensory evaluation among the 3 crossbreeds (p>0.05). The shear force value of LB pork was significantly lower than other crossbreeds (p<0.05). Total heme pigment was significantly higher in YB pork compared to LYD and LB pork (p<0.05). The TBARS value of YB pork was significantly lower than that of LYD pork, except after the I day of storage (p>0.05). TBARS values increased significantly during storage for all three crossbreeds. The lightness (CIE L) of YB pork was significantly lower, while the redness (CIE a) was significantly higher in YB pork relative to the other crossbreeds. With regard to textural properties, the hardness and adhesiveness values were significantly lower in YB pork compared to LB pork. In fresh meat, the color of YB pork was significantly higher than the other breeds (p<0.05). The content of myristic acid (C14:0) was significantly lower, while the content of arachidonic acid (C20:4) was significantly higher in LB pork (p<0.05). These results show that the YB breed has the highest quality meat of the three crossbreeds.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.813-824
• /
• 2005

This study was carried out to evaluate the quality characteristics of the spicy fermented pork with traditional seasonings. The samples, outside muscle of pork ham, were cut to cube($7{\time}10{\time}2$cm3) and five traditional seasonings such as soy sauce(T1), Kimchi sauce(T2), pickled shrimps sauce(T3), onion sauce (T4) were seasoned by the proportions of meat to seasonings(1:1), respectively. The seasoned samples were fermented at $1{\pm}1^{\circ}C$ for 10 days. And then, the spicy fermented meat was atmosphere packaged and stored at $1{\pm}1^{\circ}C$ for up to 28 days. The pH level of fermented pork has been decreased at the end of the storage compared to the early storage days. The pH level of T3 was higher than that of other treatments during the whole storage days. The salinity and saccharinity of treatments were increased during the storage periods in T1, T3 and T4. TBARS in all treatments was significantly high at the later days of the storage compared to the early days of the storage. VBN was increased until the 21 days of storage and decreased rapidly since then. There were no significant differences in WHC among the all treatments. The shear force was increased with storage in all treatments group. The L* values of surface meat showed a tendency of increasing value along the storage days and the a*, b* values showed a tendency of decreasing value. The number of total bacteria and lactic acid bacteria were tended to increase during storage, while E. coli was decreased as storage period extended. In the results of sensory evaluation, T1 had the highest score in overall acceptability.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.55-59
• /
• 2010

In this study, the physicochemical and sensory characteristics of chicken press ham not fed with citrus byproduct (T0) and fed with citrus byproduct (T1) were compared. There was not a significant difference in moisture, crude protein, crude fat, crude ash, crude fiber, Hunter's $L^*$ (lightness), $a^*$ (redness), $b^*$ (yellowness), hardness, springiness, cohesiveness, gumminess, chewiness, shear force, water holding capacity and pH between T0 and T1. There was not a significant difference between T0 and T1 in terms of the chicken ham's VBN (volatile basic nitrogen) content for the first three weeks of storage, but after the fourth week of storage, the VBN content was 15.1 and 13.7 mg% for T0 and T1, respectively, which implies that feeding citrus byproduct significantly reduced the VBN content. There was not a significant difference between T0 and T1 in terms of the chicken press ham's TBARS (2-thiobarbituric acid reactive substances) value for the first two weeks of storage. However, the TBARS value was 0.31 and 0.22 mg malonaldehyde/kg for T0 and T1 during the third week of storage, and 0.49 and 0.32 mg malonaldehyde/kg for T0 and T1 during the fourth week of storage. There was not a significant difference between T0 and T1 in terms of the chicken press ham's TPC (total plate counts) for the first three weeks of storage, but after the fourth week of storage, the TPC was 4.96 and 4.72 log CFU/g for T0 and T1, respectively, which implies that T1 showed a significantly lower TPC than T0. T1 showed significantly higher aroma, taste, and palatability of the chicken press ham than T0, but there was a not significant difference in texture and juiciness between T0 and T1.

• Culinary science and hospitality research
• /
• v.20 no.3
• /
• pp.201-213
• /
• 2014

This study showed the quality characteristics of chicken breast meat(CB) and leg meat(CL) with various kinds of existing cooking methods and double layer pan filled with Phase Change Materials(PCM) heating. Steaming resulted the highest moisture contents of 63.9% and 62.1% each in CB and CL. Also, steaming showed the lowest with 1.3% and 8.6% of crude fat in CB and CL(p<0.05) respectively. Crude protein content of CB in charcoal heating and grilling of CL had the highest values of 37.9% and 30.5% each. In the test of crude ash, grilling showed the highest with 2.4% in CB(p<0.05) and oven heating and charcoal heating was the highest with 1.3% in CL(p<0.05). In the test of cooking loss, charcoal heating showed much higher with 33.52% and 41.16% in CB and CL each than the other cooking treatments. And in case of shear force test, $5.93kg/cm^2$ in CB and $6.80kg/cm^2$ in CL were the highest scores in grilling. In the test of color, L value of CB prepared by steaming showed the highest scores of 78.31(p<0.05) while CL by oven heating was the highest of 10.00 in a value. In the overall acceptability test of 9 point-scale sensory evaluation, CB prepared by charcoal heating showed the highest score of 7.25 points in boiling, but the lowest score of 6.00 points in steaming(p<0.05). CL by charcoal heating resulted the highest score of 7.71 points but had no significant difference.

• Culinary science and hospitality research
• /
• v.21 no.1
• /
• pp.1-14
• /
• 2015

Pork belly(PB) and pork shoulder(PS) parts were tested to find out chemical and physical characteristics and sensory evaluation with various cooking methods such as pan heating, boiling, grilling, steaming, charcoal heating, pan heating and double-layer pan filled with phase change material (PCM) cooking. The moisture contents of steamed PB and PS had higher results of 60.2% and 67.2% than other treatments. The highest results of crude fat contents in PB treatments was charcoal roasting as 33.2% (p<0.05) while grilling resulted the highest at 16.0% in the PS (p<0.05). In the crude protein contents, boiling treatment resulted the lowest at 15.4% while steaming was the highest at 18.9% in PB. Also, crude protein content of grilling treatment was 25.2%, a result significantly higher than in other cooking methods in PS. Heating loss, which has a close relationship with water holding capacity, showed the highest result in the charcoal treatment at 40.18% and 39.68% each in the both of PS and PS. In the result of shear force, the lowest result was oven treatment at $2.76kg/cm^2$ in PB (p<0.05) and double-layer pan heating at $3.67kg/cm^2$ in PS (p<0.05). L value in the color test of boiling treatment showed the highest result of 65.16 and 59.72 in the PB and PS respectively (p<0.05), however it scored the lowest of 2.32 in b value in PB (p<0.05). In the 9 point-scale sensory evaluation, grilling treatment showed the highest result of 7.56 in the overall palatability of PB (p<0.05). However, PS in the pan heating which scored 7.22 was the best result while having the lowest score of 5.88 in the boiling treatment (p<0.05).

• Food Science of Animal Resources
• /
• v.30 no.2
• /
• pp.277-285
• /
• 2010

The objective of this study was to manufacture spent layer chicken meat products by natural freeze-drying. The spent layers of chickens that were slaughtered at 80 wk were obtained from a local slaughter house and separated into two halves of carcasses. The samples were divided into the following groups: 1) control (non-curing), 2) curing, and 3) curing with 2% trehalose before drying. The cured meats were placed at $2^{\circ}C$ for 7 d and then transferred to a natural drying spot located in Injae City, Gangwondo, Korea. The experiment was conducted from January to March in 2008. The average temperature, RH, and wind speed were $-1.5^{\circ}C$, 63%, and 1.8 m/sec, respectively. The cured treatments showed higher pH, lower Aw and lower shear force value compared with the control. Based on the results of TBARS (2-thiobarbituric acid reactive substances) level and volatile basic nitrogen value, lipid oxidation and protein deterioration were inhibited in curing treatments during drying. Trehalose acted as a humectant because it maintained a lower water activity despite the relatively higher moisture content during drying. The polyunsaturated fatty acids content and sensory attributes were higher in cured treatments than in the control during drying. Most of the bacterial counts in the treated groups were lower by 2 Log CFU/g after 1 mon of drying, and Salmonella spp. and Listeria spp. were not found in any treatment. There was also no microbial safety problem associated with dried meat products. Based on the results of this experiment, dried meat products could be manufactured from precured spent layer chickens by natural freeze-drying during winter.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.315-324
• /
• 2015

In this study, we prepared liquid crystal emulsion composed of amphiphilic substance $C_{14-22}$ alcohol, $C_{12-20}$ alkyl glucoside, behenyl alcohol and studied liquid crystal emulsion of properties and in vitro skin permeation. The results of formulation experiments, the clear liquid crystalline structure was observed in the ratio of $C_{14-22}$ alcohol 0.8%, $C_{12-20}$ alkyl glucoside 3.2%, behenyl alcohol 4% in the formulation. The results of physical property measurements, the viscosity of liquid crystal emulsion and O/W emulsion applied as a control group was respectively $1871.26{\sim}1.15Pa{\cdot}s$, $1768.69{\sim}1.14Pa{\cdot}s$ and the shear stress of O/W emulsion was 178.68 ~ 909.18 Pa, that of liquid crystal emulsion was 190.45 ~ 919.38 Pa. The storage modulus of O/W emulsion was 3428.53 ~ 9157.45 Pa, that of liquid crystal emulsion was 4487.82 ~ 8195.59 Pa. The tan (delta) value of O/W emulsion which means a ratio of viscosity to elasticity was 0.43 ~ 0.19, and that of liquid crystal emulsion was 0.23 ~ 0.25. The water content value on the skin for liquid crystal emulsion was significantly higher from 1 h to 6 h compared with that of O/W emulsion and the transepidermal water loss on the skin was significantly superior in skin moisture loss suppression from 30 min to 4 h compared with that of O/W emulsion. The results of skin permeation using glycyrrhizic acid, the result of skin permeation amount of liquid crystal emulsion for 24 h was $64.58{\mu}g/cm^2$, that of O/W emulsion was $37.07{\mu}g/cm^2$, that of butylene glycol solution was $41.05{\mu}g/cm^2$. Hourly permeability results, it is showed that skin penetration effect of the liquid crystal emulsion increases after 8 h. These results suggest that liquid crystal emulsions are effective for skin moisturizing effect and function as potential efficacy ingredient delivery system for the transdermal delivery.