• Journal of Sensor Science and Technology
• /
• v.24 no.6
• /
• pp.368-372
• /
• 2015

In this paper, we proposed a post-processing technique for improving classification performance of electronic nose (E-Nose) system which may be occurred drift signals from sensor array. An adaptive radial basis function network using stochastic gradient (SG) and singular value decomposition (SVD) is applied to process signals from sensor array. Due to drift from sensor's aging and poisoning problems, the final classification results may be showed bias and fluctuations. The predicted classification results with drift are quantized to determine which identification level each class is on. To mitigate sharp fluctuations moving-averaging (MA) technique is applied to quantized identification results. Finally, quantization and some edge correction process are used to decide levels of the fluctuation-smoothed identification results. The proposed technique has been indicated that E-Nose system was shown correct odor identification results even if drift occurred in sensor array. It has been confirmed throughout the experimental works. The enhancements have produced a very robust odor identification capability which can compensate for decision errors induced from drift effects with sensor array in electronic nose system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.739-742
• /
• 2000

Nanostructured ZnS thin films were grown on the slide glass substrate by the chemical bath deposition using an aqueous so1ution Of ZnSO$_4$and CH$_3$CSNH$_2$at 95$^{\circ}C$. The average grain sizes of the ZnS thin film estimating from the Debye-Scherrer formula are 4.8 nm. The optical transmittance edge of the ZnS thin films (4.0 eV) was shifted to the shelter wavelength compared with that of the bulk ZnS (3.67 eV) due to the quantum size effects. The ZnS thin films showed a strong photoluminescence intensity and a sharp emission band from 410 to 480 nm 3t room temperature. The PWHM of photoluminescence peak was about 40 nm. For the viloet(410 nm) and blue(480 nm) emission of the ZnS thin films, the temperature dependence can be described by an Arrhenius equation with an activation energy of 168 and 157 meV, respectively.

• Journal of Chest Surgery
• /
• v.23 no.3
• /
• pp.609-615
• /
• 1990

Pectus excavatum is a congenital anomaly of the anterior chest wall with a sharp concave curvature of the body of the sternum, from above downward and from side to side, especially just before the junction of the glandioloxiphoid. There are two major operative procedures -"Ravitch" or "Wada" operation- for the correction of pectus excavatum. We used the modified Ravitch operation which consists of mobilization of the sternum, transverse osteotomy, and parasternal resection of the costal cartilages followed by placement of Marlex mesh using methyl methacrylate behind the sternum and suturing the edge of the Marlex mesh to the peripheral stump of the resected ribs. This was performed in a patient with severe pectus excavatum with good results at the Department of Thoracic and Cardiovascular Surgery Yonsei University College of Medicine in Seoul, Korea on January 12, 1989.anuary 12, 1989.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.4
• /
• pp.44-48
• /
• 2005

As mechanical components are miniaturized, the demands on micro die/mold are increasing. Micro mechanical components usually have high hardness and good conductivity. Micro electrical discharge machining (MEDM) can thus be an effective way to machine those components. In micro cavity fabrication using MEDM, it is observed that the bottom surface of the cavity is distorted. Electric charges tend to be concentrated at the sharp edge, and debris cannot be drawn off easily at the center of the bottom surface. These two phenomena make the bottom surface of electrode and workpiece distort. As machining depth increases, the distorted shape of the electrode approaches hemisphere. This process is affected by both capacitance and the size of electrode. By using a smaller electrode than the desired cavity size and appropriate tool movement, bottom shape distortion can be prevented.

• Journal of the Optical Society of Korea
• /
• v.5 no.2
• /
• pp.33-36
• /
• 2001

Common methods of determining the spatial resolution of fiber-optic image guides are by measuring the diameter of individual microfibers or by the use of a resolution test target. However these methods cannot provide enough information of spatial resolution in ultrathin fiber-optic image guides. In this study, a simple method to measure the modulation transfer function (MTF) of an mage guide was developed. The MTFs of ultrathin image guides with 3 and 4${\mu}{\textrm}{m}$ Um diameter were measured by examining transmitted sharp edge image. This method should be especially useful for measuring spatial resolution of ultrahigh resolution image guides with less than 5 ${\mu}{\textrm}{m}$ diameter microfibers because their spatial resolution cannot be determined by individual microfiber diameter due to crosstalk and leaky ray phenomena.

• Bulletin of the Korean Mathematical Society
• /
• v.58 no.1
• /
• pp.171-181
• /
• 2021

The fixing number of a graph G is the smallest order of a subset S of its vertex set V (G) such that the stabilizer of S in G, ��S(G) is trivial. Let G1 and G2 be the disjoint copies of a graph G, and let g : V (G1) → V (G2) be a function. A functigraph FG consists of the vertex set V (G1) ∪ V (G2) and the edge set E(G1) ∪ E(G2) ∪ {uv : v = g(u)}. In this paper, we study the behavior of fixing number in passing from G to FG and find its sharp lower and upper bounds. We also study the fixing number of functigraphs of some well known families of graphs like complete graphs, trees and join graphs.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.44.1-44.1
• /
• 2020

Hα jets of cool chromospheric plasma are protruding into the solar corona 10-100 Mm above the photosphere. The driving mechanisms of Hα jets have been widely studied for decades. However, the detailed process is still elusive. We observed shock signatures moving along a dark jet using 1.6 meter Goode Solar Telescope at Big Bear Solar Observatory. The first shock front of the jet shows sharp --- when it moves upward, while fuzzy and granulated when it moves downward. The jet itself extends upward when the second shock front of the jet reaches the top of the jet. We find abrupt EUV brightenings when the second shock front collides with the edge of the jet. The third front and the fouth front quasi-periodically. These phenomena might be the signs of the rebound shock waves triggered by p-mode wave leakages at the bottom of the jets. Our observation suggests that the jet can be triggered by the rebound shock waves generated by the p-mode waves leaked at the bottom of the jets.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.4
• /
• pp.257-262
• /
• 2015

In this paper, the split-ring DGS resonator is proposed and its equivalent circuit are analyzed to design the low pass filter. Compared with the conventional dumbell DGS cell, this structure has a flat fluctuation in low frequency range and a sharp slop at edge frequency. The out-band suppression of the SRR-DGS cell can be improved by placing the open stubs on the conductor line which operates as parallel capacitances. Making use of equivalent circuit analytical method, the characteristics of the improved SRR DGS cell are investigated and applied to design compact low pass filter, which has a low in-band loss, sharp slop and high suppression of more than 35dB within a wide out-band frequency range. The dependence of the transmission characteristic on the dimension of a split ring, such as side-length and split-gap, is analyzed in detail. In addition, an improved SRR DGS cell model with open stubs loaded on the conductor line is then presented to improve the out-band suppression. By using the equivalent-circuit analytical method, an S-band microstrip low-pass filter with perfect low-pass characteristic and high out-band suppression is designed and fabricated.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.177-182
• /
• 2014

Purpose : The goal of this study was to compare and analysis the dose distribution and treatment time between Tomotherapy planning with fixed jaw(FJ) and dynamic jaw(DJ). Materials and Methods : Seven patients were selected in the study including five common clinical cases(brain, head and neck(HN), lung, prostate, spine). 1) Helical Tomotherapy plans with FJ and DJ were generated with the same planning parameters such as Modulation factor, Pitch and Field width. 2) Tomo_edge plans with a larger field width were generated to compare to conventional HT delivery with fixed jaw. Dosimetric evaluation indices for target coverage are Dmin, Conformity index(CI) and for whole body including target are $V_{10%}$, $V_{25%}$, $V_{50%}$, $V_{75%}$ using Dose-volume histogram(DVH). Also, Treatment time and Cumulative MU were used for clinical review on Tomo_edge. Results : In case of using the same field width of Tomotherapy planning with FJ and DJ, the averaged variations were $V_{10%}$: -11.91%, $V_{25%}$: -7.6%, $V_{50%}$ :-4.75%, $V_{75%}$: -1.04%. Tomo_edge with a larger field width provides the averaged variations for target coverage: Dmin: -0.72%, CI: -1.25% and also shows the tendency of a sharp $V_{x%}$ decline in low dose area. The clinical improvements in the larger field width with DJ were observed in the treatment time, ranging from -51.21% to -15.11, and the Cumulative MU decrease, ranging from -57.74% to -15.31%. Conclusion : Target coverage achieved by FJ and DJ with the same field width has little differences. But integral doses on whole body efficiently decreased. Compared to the conventional HT delivery, Tomo_edge with a larger field width presents a little worse target coverage. However, it provides faster treatment delivery and improved cranial-caudal target dose conformity. Therefore, Tomo_edge mode is efficient in improving the treatment time and integral dose while maintaining comparable plan quality in clinic.

• Korean Journal of Ichthyology
• /
• v.21 no.4
• /
• pp.273-282
• /
• 2009

The taxonomic review of the family Trachipteridae was carried out based on the Trachipterus ishikawae (7 specimens), Zu cristatus (4 specimens), Desmodema polystictum (2 specimens) collected from the East Sea, South Sea and adjacent waters of Jeju Island of Korea from June 2006 to August 2008. Among them, D. polystictum was revealed as an unrecorded species from Korea, being characterized by the following characters: the ventral edge smooth; body color silvery white with a lot of large dark rounded spot. We proposed the new Korean name of the genus Desmodema as "Jeom-tu-ra-chi-sog", D. polystictum as "Jeom-tu-ra-chi". Z. cristatus has a elongated first six dorsal fin and pelvic fin rays. T. ishikawae has a row of sharp tubercles along the ventral edge, and straightly elongated body form. In meristic characters, the number of dorsal fin rays were 178~195 in T. ishikawae, 137~148 in Z. cristatus and 125~130 in D. polystictum, the number of vertebrae were well distinguished among three species; T. ishikawae (80~83), D. polystictum (72~74) and Z. cristatus (65~68).