• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.463-470
• /
• 2014

Stealth technology of combat aircraft is most significant capability in recent air battlefield. As the detector of IR missiles is being developed, IR stealth capability which is evaluated by IR signature level become more important than it was in previous generation. Among IR signature of aircraft from various sources, aerodynamic heating dominates in long-wavelength IR spectrum of $8{\sim}12{\mu}m$. Skin temperature change by aerodynamic heating which is derived by effects of Mach number and structure. The 4th and 5th generation aircraft are selected for calculation of the skin temperature, and its height and velocity in numerical conditions are 10,000 m and Ma 0.9~1.9 respectively. Aircraft skin temperature is calculated by computing convection of fluid and conduction, convection and radiation of surface. As the aircraft accelerates to higher Mach number, maximum skin temperature increases more rapidly than average temperature and temperature distribution changes in more sharp, interactive ways. The 4th generation aircraft whose shape is more complex than that of the 5th generation aircraft have complicated temperature distribution. On the other hand, the 5th generation aircraft whose shape is relatively simple shows plain temperature distribution and lower skin temperature in terms of both average and maximum value.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.4
• /
• pp.101-107
• /
• 2009

Actuators using shape memory alloys use the one-way shape recovery stress. But when external load is applied the accumulated plastic strain induced by repeated deformation is the factor of generation of uncorrect recovery stress and unreliability. To solve this problem, two-way shape memory effect (TWSME) is considered. TWSME induced by plastic deformation have advantages including simple heating cycle without external force and enough recovery force for using actuators. but there is no research on cylinder-type or tube-type shape memory alloy actuators using two-way shape memory effect until now. Therefore in this study, characteristics of two-way shape memory effect is verified through the compression experiments using cylinder-type and tube-type specimens.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.185-195
• /
• 1998

A new blank design method is proposed to predict the optimum initial blank shape in the sheet metal forming process. The rollback method for blank shape design takes the difference between final deformed shape and target contour shape into account. Based on the method, a computer program composed of blank design module, FE-analysis program and mesh generation module is developed. The rollback method is applied to square cup drawing process with the flange of unifiorm size around its periphery to confirm its validity. The optimum initial blank shape is obtained from an arbitrary square blank after three modifications. Good agreements are recognized between the numerical results and the published results for initial blank shape and thickness strain distribution. The optimum blank shape for two parts of automobile sub-frame is designed. The thickness distribution and the level of punch load is improved. Also, the method is applied to design the weld line in the tailor-welded blank. It is concluded that the rollback method is an effective and convenient method for an optimum blank shape design.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.35-36
• /
• 2008

• Journal of the Korean Society of Tobacco Science
• /
• v.14 no.2
• /
• pp.126-132
• /
• 1992

This experiment was conducted to examine estimates of heterosis, degree of dominance, heritability and phenotypic and genotypic correlation for several mutant characters in flue-cured tobacco variety. Significant heterosis was noted, recording 2.73 and 6.16% for leaf width, -6.86 and -4.72 for leaf shape index, 19.8 and 23.4% for bacterial wilt disease index in Fl an4 F2 generation, respectively, and -1.44 for days to flower in F2 generation. And also leaf width was appeared partial dominance in Fl, and leaf shape index in Fl and F2, Leaf width in F2 was appeared overdominance. Estimated heritabilities in the broad sense ranged from 0.77 to 0.87 for plant and stalk height and days to flower, while those of leaf number, leaf length and width, leaf shape index and bacterial wilt disease index ranged from 0.50 to 0.65. And the heritabilities in the narrow sense were appeared 0.64 and 0.72 for stalk and plant height, respectively, and the others were ranged from 0.32 to 0.47 Positive genotpic correlations appeared among plant height, stalk height, leaf length and leaf width, and between leaf shape index ands day to flower. And negative genotypic correlations appeared between leaf shape index and plant height and stalk height and leaf width, and between bacterial wilt disease index and leaf length.

• Journal of Fashion Business
• /
• v.22 no.3
• /
• pp.122-142
• /
• 2018

In the virtual fitting system, the use of a 3D avatar is not a simple garment model, but it should be able to reproduce the size and shape of the customer using a fitting system. Although various virtual fitting systems have their own 3D avatar sizing systems and provide 3D avatars that match the size of the customer, there are limitations in realizing the actual body shape in actual use by the consumer. The purpose of this study is to realize a 3D avatar with excellent size and conformity for customer use. Therefore, this study aims to provide basic data for the formation of a 3D standard avatar of Korean women aged in their 20's, by comparing and analyzing the degree of the consumer user friendly system change of a body type, and the consumer's ability in selecting a consumer representative body type. Based on the survey data of 'Size Korea' conducted from 2004 to 2015 at three times, we examined the change of body shape over 10 years. Then, based on the results of 6th and 7th data, 4 factors of the concurrent body shape change of women of the consumer demographic studied were selected through the use of a factor analysis. Following this analysis, the 4 extracted factors were clustered again and finally released 7 representative body types, which were obtained based on height and weight. The size of each representative figure is derived by the use of a regression analysis, and it is used as a basic data for 3D avatar formation of the virtual fitting system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.5 s.164
• /
• pp.729-741
• /
• 2007

In order to examine the characteristics of brassiere products for the 1924 generation brands on the market and grasp problems, we selected three 'comparative brassieres', each one from among the 1924 underwear brands with the highest recognition and sales profit, and then designed a 'sample brassiere' pattern(75A) with a similar shape to the comparative brassieres. We set up the "New Cup Grading Rule" with a view of reflecting the wearing effect that was varied according to cup sizes, graded the sizes of 75AA and 75B with this method, and made the sample brassieres in three sizes. We conducted the wearing evaluation and body measurements of 9 subjects after analyzing the patterns and characteristics of the sample brassieres and three comparative brassieres. As a result of the wearing evaluation, the sample and comparative brassiere 2, the dimensions and shapes were appropriate for the 1924 generation consumers and expressed an overall natural silhouette, showed satisfactory results in the entire evaluation questions. On the other hand, the comparative brassiere 1 and 3 that tended toward making a big change in the physical characteristics got unsatisfactory evaluations in the dimensions of the cups, clothing pressure, and bust silhouette. As a result of observing the variation in body dimensions by body measurements when nude and when wearing each brassiere and then summing it up with the score of the wearing evaluation, it was proven that too much change in body shape can create a negative image by upsetting the balance of the whole silhouette. Therefore, it is desirable to develop brassiere products with proper dimensions and clothing pressure that can make a physical change that harmonizes the overall bust silhouette and the position and shape of the breasts.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.1
• /
• pp.11-18
• /
• 2011

Wave overtopping reef system with guide vanes convert incident wave energy on the reef type structures into electric power. Previous studies decided shape parameters likes slope, height of the sloping arm and shape of guide vane. In this paper, using these shape parameters produce 1/7 scale model and construct integration scale model system combining water pressure head turbine, power generation, power control, operating control and monitoring system. In these systems, we measure the overtopping and power generation with different wave heights and periods and compare the results with the previous studies. This was confirmed designed overtopping and power generation, then we suggest efficient control system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.3
• /
• pp.327-336
• /
• 2016

Manufacturers of aircraft engines have introduced computer-aided manufacturing (CAM) software to operate and control computerized numerical control (CNC) machine tools. However, the generation of a CAM model is a time consuming and error-prone task since machining procedure and operational details are manually defined. For the automatic generation of a CAM model, feature recognition techniques have been widely studied. However, their recognition coverage is limited so that complex shapes such as a jet engine cannot be fully developed. This study presents a novel approach to quickly generate a CAM model from a CAD model using shape search techniques. Once an operator sets a machining operation as a reference operation, the same shapes as the shapes referenced by the operation are searched. The reference operation is copied to the positions of the searched shapes. The proposed method was verified through experiments with a jet engine compressor case.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.3
• /
• pp.27-33
• /
• 2017

In this paper presents the MPPT tracking algorithm using angle control of flexible PV in BIPV. The proposed algorithm is based on MPPT tracking algorithm for curtain wall using flexible PV. It is an algorithm to find optimal power generation condition by controlling the angle of flexible PV using the air layer of window. The angle of flexible PV tests the power generation by separating the center of flexible PV into the interior angle in the interior direction and the external angle in the center of flexible PV. When the angle of flexible PV was used as interior angle, the generation amount was increased by 15.79% and increased by 8.45% compared with the external angle. MPPT tracking is performed on the generation amount of the interior angle which has the most power after comparing the generation amount according to the bending shape of the flexible PV. This algorithm can be the most efficient method for the curtain wall using flexible PV because the bending pattern with the greatest amount of power generation may be different because the environment of the building applying the curtain wall is different.