한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제17권4호
  • /
  • Pages.101-107
  • /
  • 2009
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

압축 하중사이클을 이용한 양방향 형상기억효과 특성 연구

Experimental Study on the TWSME Characteristics using Compressive Loading Cycles

  • 유영익 (한국과학기술원 기계공학과) ;
  • 김현철 (한국과학기술원 기계공학과) ;
  • 이정주 (한국과학기술원 기계공학과) ;
  • 이우용 (국방과학연구소)
  • 투고 : 2008.12.04
  • 심사 : 2009.02.13
  • 발행 : 2009.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Actuators using shape memory alloys use the one-way shape recovery stress. But when external load is applied the accumulated plastic strain induced by repeated deformation is the factor of generation of uncorrect recovery stress and unreliability. To solve this problem, two-way shape memory effect (TWSME) is considered. TWSME induced by plastic deformation have advantages including simple heating cycle without external force and enough recovery force for using actuators. but there is no research on cylinder-type or tube-type shape memory alloy actuators using two-way shape memory effect until now. Therefore in this study, characteristics of two-way shape memory effect is verified through the compression experiments using cylinder-type and tube-type specimens.

키워드

참고문헌

  1. T.H. Jeong, D.J. Lee and H.G. Kim, 'Development of Al Matrix Composite using Shape Memory Alloy,' Transactions of KSAE, Vol.6, No.6, pp.53-62, 1998
  2. A. Baz, S. Poh and J. Gilheany, 'A Multi-mode Distributed Sensor for Vibrating Beams,' Journal of Sound and Vibration, Vol.165, No.3, p.481, 1993 https://doi.org/10.1006/jsvi.1993.1272
  3. L.C. Chang and T.A. Read, 'Elastic Deformation and Diffusionless Phase Changes in Metals-The Gold-Cadmium Betaface,' American Institute of Mining and Metallurgical Engineers, Vol.191, p.47, 1951
  4. W. Huang, 'Onthe Selection of Shape Memory Alloys for Actuators,' Materials and Design, Vol.23, pp.11-19, 2002 https://doi.org/10.1016/S0261-3069(01)00039-5
  5. P. A. Neukomm, H. P. Bornhauser, T. Hjochuli, R. Paravicini and G. Schwarz, 'Characteristics of Thin-wire Shape Memory Actuators,' Sensors and Actuators, Vol.21, pp.247-252, 1990 https://doi.org/10.1016/0924-4247(90)85048-9
  6. A. Falvo, F. Furgiele and C. Maletta, 'Hysteresis Modeling of Two-way Shape Memory Effect in NiTi Alloys,' Meccanica, Vol.43, pp.165-172, 2008 https://doi.org/10.1007/s11012-008-9118-6
  7. T. W. Duerig, K. N. Melton, D. Stockel and C. M. Wayman, Engineering Aspect of Shape Memory Alloys, pp.195-206, Butterworth-heinemann, 1990
  8. X. M. Zhang, J. Fernandez and J. M. Guilemany, 'Role of External Applied Stress on the Twoway Shape Memory Effect,' Materials Science and Engineering: A, Vol.438-440, pp.431-435, 2006 https://doi.org/10.1016/j.msea.2006.02.093
  9. L. Orgeas and D. Favier, 'Non-symmetric Tension-compression Behaviour of NiTi Alloy,' Journal of Physics, Vol.5, No.8, pp.605-610, 1995
  10. J. Van Humbeeck, M. Chandrasekaran and L. Delaey, 'Shape Memory Alloys: Materials in Action,' Endeavour, New Series, Vol.15, No.4, pp.148-154, 1991 https://doi.org/10.1016/0160-9327(91)90119-V