• Korean Journal of Ecology and Environment
• /
• v.56 no.4
• /
• pp.406-413
• /
• 2023

Captive breeding and reintroduction are crucial strategies for conserving endangered species populations. However, fish raised in predator-free environments, show a lack of recognition of predationrelated stimuli such as chemical and visual signals. It is critical to recognize chemical signals from injured conspecifics, also known as alarm signals, and the order or shape of predators to indicate the spread of predation risk in the habitat. We conducted a laboratory experiment to determine and adjust the optimal exposure period to induce appropriate anti-predator behavior response to different types of stimuli (Chemical, Visual and Chemical+Visual) for the endangered species Microphysogobio rapidus. Our results demonstrate that predator avoidance behavior varies depending on the types of stimuli and the duration of predation risk exposure. First, the results showed captive-breed M. rapidus show lack of response against conspecific alarm signal (Chemical cue) before the predation risk exposure period and tend to increase response over predation risk exposure time. Second, response to predator (visual cue) tend to peak at 48 hours cumulative exposure, but show dramatic decrease after 72 hours cumulative exposure. Finally, response to the mixed cue (Chemical+visual) tend to peak prior to the predation risk exposure period and show reduced response during subsequent exposure periods. This experiment confirms the lack of responsiveness to conspecific alarm signals in captive-bred M. rapidus and the need for an optimal nature behavior enhancement program prior to release of endangered species. Furthermore, responsiveness to predator visual signal peak at 48 hours cumulative exposure, suggest an optimal predation risk exposure period of up to 48 hours.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.1
• /
• pp.67-71
• /
• 2010

Impingement of a high power laser pulse (above 1 GW/$cm^2$) on a metal foil causes its ablation, which is characterized by a rapid expulsion of matter and the initiation of a strong shock wave inside the solid metal. The shock propagates through the foil and reverberates on the rear side, causing its deformation and microparticle ejection, which were deposited on the foil prior to ablation. Based on this principle, we are developing a new drug delivery system - Biolistic gun. Current study is focused on the controllability, stability, efficiency of the system, and characterization of the penetration shapes in various conditions. We have tested the system by applying direct and confined ablation. Several different media combinations were used for confinement-BK7 glass, water, BK7 glass with water, and succulent jelly(ultrasono jelly, RHAPAPHRM). Biological tissue was replicated by a 3% gelatin solution. Present data shows that the confinement results in enhancement of penetration shape reached by 5 um cobalt microparticles. Based on the analysis of the experimental results we observe that the penetration shape of microparticles can be controlled by adjusting the thickness of confinement media.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_1
• /
• pp.483-491
• /
• 2013

By a development of car navigation systems and mobile or positioning technology, it increases interest in location based services, especially pedestrian navigation systems. Updating of digital maps is important because digital maps are mass data and required to short updating cycle. In this paper, we proposed change detection for different network data-sets based on areal feature matching. Prior to change detection, we defined type of updating between different network data-sets. Next, we transformed road lines into areal features(block) that are surrounded by them and calculated a shape similarity between blocks in different data-sets. Blocks that a shape similarity is more than 0.6 are selected candidate block pairs. Secondly, we detected changed-block pairs by bipartite graph clustering or properties of a concave polygon according to types of updating, and calculated Fr$\acute{e}$chet distance between segments within the block or forming it. At this time, road segments of KAIS map that Fr$\acute{e}$chet distance is more than 50 are extracted as updating road features. As a result of accuracy evaluation, a value of detection rate appears high at 0.965. We could thus identify that a proposed method is able to apply to change detection between different network data-sets.

• Journal of KIISE:Databases
• /
• v.34 no.4
• /
• pp.304-314
• /
• 2007

Content Based Image Retrieval (CBIR) is to store and retrieve images using the feature description of image contents. In order to support more accurate image retrieval, it has become necessary to develop features that can effectively describe image contents. The commonly used low-level features, such as color, texture, and shape features may not be directly mapped to human visual perception. In addition, such features cannot effectively describe a single image that contains multiple objects of interest. As a result, the research on feature descriptions has shifted to focus on higher-level features, which support representations more similar to human visual perception like spatial relationships between objects. Nevertheless, the prior works on the representation of spatial relations still have shortcomings, particularly with respect to supporting rotational invariance, Rotational invariance is a key requirement for a feature description to provide robust and accurate retrieval of images. This paper proposes a high-level feature named 8AB (8 Angular Bin) that effectively describes the spatial relations of objects in an image while providing rotational invariance. With this representation, a similarity calculation and a retrieval technique are also proposed. In addition, this paper proposes a search-space pruning technique, which supports efficient image retrieval using the 8AB feature. The 8AB feature is incorporated into a CBIR system, and the experiments over both real and synthetic image sets show the effectiveness of 8AB as a high-level feature and the efficiency of the pruning technique.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.740-746
• /
• 2009

In the present study, the drowning-out crystallization of L(+)-calcium lactate was investigated in order to develop the crystallization separation process. The crystallization of the calcium lactate was induced by injecting the alcoholic anti-solvent into the aqueous solution of calcium lactate and the control of the calcium lactate crystal size during the crystallization was primarily investigated under the consideration of the anti-solvent species, anti-solvent composition and agitation speed as the key operating factors. Alcohols of methanol, ethanol, n-propanol and i-propanol were used as the anti-solvent for the drowning-out crystallization. Prior to the crystallization experiment, the solubility of calcium lactate in the water-alcohol mixture was measured along with the variation of the alcohol species and composition, which was necessary to estimate the supersaturation level of the crystallization. By the drowning-out crystallization, the calcium lactate crystals of the fabric shape were obtained. Using the ethanol as the antisolvent, the fabric crystals close to the needle shape were produced. However, the hairy crystals were obtained by using the propanol as the anti-solvent. Due to such morphological features, the crystals was highly apt to form the aggregates. The aggregation of the crystals was intensified as increasing the alcohol fraction in the water-alcohol mixture. Meanwhile, the agitation caused the breakage of crystals, resulting in the decrease of the crystal size. Therefore, the crystal size in the crystallization was predominantly determined by the competition between the crystal aggregation and breakage.

• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.3
• /
• pp.187-194
• /
• 2012

Prostate cancer is one of the most frequent cancers in men and is a major cause of mortality in the most of countries. In many diagnostic and treatment procedures for prostate disease, transrectal ultrasound(TRUS) images are being used because the cost is low. But, accurate detection of prostate boundaries is a challenging and difficult task due to weak prostate boundaries, speckle noises and the short range of gray levels. This paper proposes a method for automatic prostate segmentation in TRUS images using its average shape model and invariant features. This approach consists of 4 steps. First, it detects the probe position and the two straight lines connected to the probe using edge distribution. Next, it acquires 3 prostate patches which are in the middle of average model. The patches will be used to compare the features of prostate and nonprostate. Next, it compares and classifies which blocks are similar to 3 representative patches. Last, the boundaries from prior classification and the rough boundaries from first step are used to determine the segmentation. A number of experiments are conducted to validate this method and results showed that this new approach extracted the prostate boundary with less than 7.78% relative to boundary provided manually by experts.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.476-484
• /
• 2017

The purpose of this paper is to verify the structural integrity of a region with numerous penetration-holes in offshore structures such as semi-submersible rig and FPSO. In order to effectively check the yielding and buckling strength of plate members with penetration-holes, a screening analysis program was developed with the FE analysis tool to generate fine meshed model using the theoretical and analysis methods. When a hole is appeared in the plate structure members, the flow of stress is altered such that concentrations of stress form near the hole. Stress concentrations are of concern during both preliminary and detail design and need to be addressed from the perspectives of strength. To configure the geometrical shape, very fine meshed FE analysis is needed as the most accurate method. However, this method is practically impossible to apply for the strength verifications for all perforated plates. In this paper, screening analysis method was introduced to reduce analysis tasks prior to detailed FE analysis. This method is applied to not only the peak stress calculation combined stress concentration factor with nominal stress but also nominal equivalent stress calculation considering cutout effects. The areas investigated by very fine meshed analysis were to be chosen through screening analysis without any reinforcements for penetration-holes. If screening analysis results did not satisfy the acceptance criteria, direct FE analysis method as the 2nd step approach were applied with one of the coarse meshed model considering hole or with the very fine meshed model considering the hole shape and size. In order to effectively perform the local fine meshed analysis, automatic model generating program was developed based on the MSC/PATRAN which is pre-post FE analysis program. Buckling strength was also evaluated by Common Structure Rule (CSR) adopted by IACS as the stress obtained from very fine meshed FE analysis. Due to development of the screening analysis program and automatic FE modeling program, it was able to reduce the design periods and structural analysis costs.

• Journal of the Korean Society of Radiology
• /
• v.84 no.3
• /
• pp.596-605
• /
• 2023

Purpose This study aimed to evaluate the US features of the parathyroid glands (PTGs) using surgical specimens of normal PTGs obtained during thyroid surgery. Materials and Methods This study included 34 normal PTGs from 17 consecutive patients who underwent thyroid surgery between December 2020 and March 2021. All normal PTGs were histologically confirmed by intraoperative frozen-section biopsy for autotransplantation. Surgically resected parathyroid specimens were scanned in sterile normal saline using high-resolution US prior to autotransplantation. The US features of echogenicity (hyperechogenicity or hypoechogenicity), echotexture (homogeneous or heterogeneous), size, and shape (ovoid or round) were retrospectively evaluated. The echogenicity of the three PTGs was compared with that of the thyroid parenchyma of the resected thyroid specimens in two patients. Results All PTGs showed hyperechogenicity similar to that of gauze soaked in normal saline. Homogeneous hyperechogenicity was observed in 32/34 (94.1%) patients, and the echogenicity of the three PTGs was hyperechoic compared with that of the thyroid parenchyma. The long diameter of the PTGs ranged from 5.1 mm to 9.8 mm (mean, 7.1 mm) and the shape of the PTGs was ovoid in 33/34 (97.1%) patients. Conclusion The echogenicity of normal PTG specimens was consistently hyperechoic, and the small ovoid homogeneously hyperechoic structure was a characteristic US feature of the PTGs.

• Archives of Plastic Surgery
• /
• v.34 no.5
• /
• pp.569-573
• /
• 2007

Purpose: The selection of the recipient vessels in breast reconstruction has a great influence on the surgical result and the shape of the reconstructed breast. We would like to introduce the criteria for the selection of recipient vessels in delayed reconstruction of the breast. Methods: We studied 56 patients with delayed breast reconstruction using free TRAM flaps from April 1994 to December 2006. The thoracodorsal and the ipsilateral internal mammary vessels were used as recipients in 25 patients each, the opposite internal mammary vessels in 3 patients, the thoracoacromial vessels in 2 patients, and the transverse cervical artery with the cephalic vein in 1 patient. The survival rate of the flaps, the vessel diameter, the length of the pedicles, and the convenience of vessel dissection were studied. Results: The diameter of the recipient vessel did not influence the anastomosis. The operation time, the survival rate of flap, the postoperative complications showed no significant difference according to the recipient vessel. Dissection of the thoracodorsal vessels was tedious due to scar formation from the prior operation. Dissection of the internal mammary vessels proved to be relatively easy, and the required length of the pedicle was shorter than any other site, but the need for removal of rib cartilage makes this procedure inconvenient. Conclusion: The first choice of the recipient vessel in immediate breast reconstruction is the thoracodorsal vessels, but in cases of delayed reconstruction the internal mammary vessels are favored as the first choice, because the thoracodorsal vessels have a high unusability rate. If the ipsilateral internal mammary vessels prove to be useless, the contralateral vessels can be used. The thoracoacromial vessels are useful, when the mastectomy scar is located in the upper portion. The transverse cervical artery and the cephalic vein can serve as the last resort, if all other vessels are unreliable.

• 한국정보교육학회:학술대회논문집
• /
• 2010.08a
• /
• pp.9-13
• /
• 2010

Supported by the Ministry of Knowledge Economy, this research explored the potentiality of the use of hands-on robots in elementary school curriculum. On the basis of the analysis of prior research, we defined the meaning and the characteristics of hands-on robots. The priority was given to the development of lesson plans in attempting to activate the use of robots in elementary school curriculum. Also considering the difficulties faced in schools and the characteristics of robot-based instruction, we classified hands-on robots according to the shape and the goal of use.