• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.3
• /
• pp.99-110
• /
• 2020

In terms of junior high school girls' growth patterns during early adolescence, are unlike childhood when relatively balanced growth patterns are found and high school years in which the normal adult body type is nearly reached, growth patterns displayed are imbalanced and rapid. In fact, diverse size changes by body part growth occur significantly different from individual to individual. Therefore, it has been hard for junior high school students to select their proper size when buying school uniforms. This study attempted to acquire basic data needed to address adolescent body shapes and school uniform patterns for junior high school girls, using the data from the 7th Size Korea Survey (2015). Specifically, it provides basic data for the development of school uniform patterns through the classification of their body into particular types, After extracting body shape components and a cluster analysis using ANOVA. According to a factor analysis conducted to determine body shape components, six factors were obtained: Factor 1: bulk and horizontal size, Factor 2: body height and length, Factor 3: shoulder shape and length, Factor 4: shape of upper body, Factor 5: lower drop, Factor 6: upper drop with a variance of 81.46%. To classify junior high school girls' body shape and determine their characteristics, a cluster analysis was performed with the variables obtained using factor analysis. Body shape was classified into three different types: Type 1 accounted for 30.7%. This was a short, slender body with the smallest bulk, size, and upper drop. Type 2 accounted for 24.9%. This was the largest in bulk and horizontal size and highest and length as well. Type 3 accounted for 44.5%. This type was close to average in terms of horizontal size, length and height, and high drop values. To develop school uniforms with great accuracy and body fit for junior high school students, there should be further studies on changes in body shape and their causes. The study results can serve as basic data for comparing branded school uniform patterns for junior high school girls and developing school uniform patterns based on body shape, using 3D virtual clothing simulations.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.152-157
• /
• 2001

This paper is to model a 3D-shape product applying mathematically the data acquired from a 30 scanner and using an Automatic Design Program. The research studied in th reverse engineering up to now has been developed continuously and surprisingly. However, forming 3D-shape sol id models in CAE and CAM. based on the research, the study leaves much to be desired. Especially, analyses and studies reverse-designing automatically using measured data after manufacturing. Consequently, we are going to acquire geometric data using an 30 scanner in this study with which we will open a new field of reverse engineering by a program which can design a 3D-shape solid model in a CDA-based program automatically. Utilization of this program make it possible to minimize time in designing a product and establish a ADS(Automatic design system) program library to using all of the data from reverse engineering.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.599-602
• /
• 2002

A novel rapid prototyping (RP) process, an automated transfer type variable lamination manufacturing process (Automated VLM-ST) has been developed. In Automated VLM-ST, a vacuum chuck and linear moving system transfer the plate type material with two pilot holes to the rotation stage. A four-axis synchronized hotwire cutter cuts the material twice to generate Automated Unit Shape Layer (AUSL) with the desired width, side slopes, length, and two reference shapes in accordance with CAD data. Each AUSL is stacked on the stacking plate with two pilot pins using the pilot holes in AUSL and the pilot pins. Subsequently, adhesive is supplied to the top surface of the stacked AUSL by a bonding roller and pressure is simultaneously applied to the bottom surface of the stacked AUSL. Finally, three-dimensional shapes are rapidly fabricated. This paper describes the procedure for generating the cutting path data (AUSL data) f3r automated VLM-ST. The method for the generation of the Automated Unit Shape Layer (AUSL) in Automated VLM-ST was practically applied and fabricated for a various shapes.

• Journal of Korea Multimedia Society
• /
• v.24 no.3
• /
• pp.396-405
• /
• 2021

In surgery to remove pancreatic cancer, it is important to figure out the shape of a patient's pancreas. However, previous studies have a limit to detect a pancreas automatically in abdominal CT images, because the pancreas varies in shape, size and location by patient. Therefore, in this paper, we propose a method of learning various shapes of pancreas according to the patients and adjacent slices using Faster R-CNN based on Inception V2, and automatically detecting the pancreas from abdominal CT images. Model training and testing were performed using the NIH Pancreas-CT Dataset, and intensity normalization was applied to all data to improve pancreatic detection accuracy. Additionally, according to the shape of the pancreas, the test dataset was classified into top, middle, and bottom slices to evaluate the model's performance on each data. The results show that the top data's mAP@.50IoU achieved 91.7% and the bottom data's mAP@.50IoU achieved 95.4%, and the highest performance was the middle data's mAP@.50IoU, 98.5%. Thus, we have confirmed that the model can accurately detect the pancreas in CT images.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.125-129
• /
• 2009

In this paper automatic 3D wing shape modeling program is introduced. The program is developed in Visual Basic based on Net Framework 3.5 environment by using CATIA COM Library, and it is used together with CATIA system to model 3D wings with or without flaps. With this program users can easily construct wing models by specifying geometry parameters which are usually design variables with the aid of easy-to-use GUI environment, and specifying sectional airfoil data is done either by using analytic shape functions such as NACA series airfoils or by providing input files with point data describing the airfoil shape. When all the input parameters are provided, users can either work further with the model in the CATIA system which would be automatically started by the program or save the resultant model in the format of users choice. Unstructured grid generation program is also briefly described which can make grid generation task for a 3D wing easy and efficient one when used together with the wing modeling program by choosing STL format as the model's output format.

• Journal of the Korean Society of Costume
• /
• v.55 no.5 s.95
• /
• pp.55-64
• /
• 2005

The concern with three-dimensional measurement has been growing in recent years. And over the last few years, several studies have been made on three-dimensional measurement. Some of the studies using a three-dimensional measurement have focused on type of form of human body and evaluation of fitness. But there has been no study about applications of three-dimensional measurement system for shape analysis. So, the purpose of this study was to investigate about application of three-dimensional mea-surement system lot shape analysis. The instrument and tools for three-dimensional measurement was Whole Body 3D scanner(model name: Exyma-WBS2H). Analysis program used in experiment is Rapid Form 2004 PPI (INUS technology, Int, Korea). The following results were obtained; 1. The point data using three-dimensional measurement system built 3D model. 2. The three-dimensional data were used to analyze length and curvature of shape. 3. The shape using three-dimensional measurement system could be used in variety field.

• Journal of Korea Multimedia Society
• /
• v.6 no.6
• /
• pp.1000-1007
• /
• 2003

In this paper, we propose an efficient method for locating lip. The lip shape is represented as a set of points based on Point Distribution Model. We use the Isodata clustering algorithm to find clusters for all training data. For each cluster, a lip shape model is calculated using principle component analysis. For all training data, a lip boundary model is calculated based on the pixel values around the lip boundary. To decide whether a recognition result is correct, we use a cost function based on the lip boundary model. Because of using different models according to the lip shapes, our method can localize correctly the flu far from the mean shape. The experiments have been performed for many images, and show correct recognition rate of 92%.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.3
• /
• pp.148-156
• /
• 2002

Most Rapid Prototyping (RP) processes adopt a solid Computer Aided Design (CAD) model, which will be sliced into thin layers of constant thickness in the building direction. Each cross-sectional layer is successively deposited and, simultaneously, bonded onto the previous layer; and eventually the stacked layers from a physical part of the model. A new RP process, the transfer-type Variable Lamination Manufacturing process using expandable polystyrene foam sheet (VLM-ST), has been developed to reduce building time and to improve the surface finish of parts with the thick layers and a sloping surface. This paper describes the generation of Unit Shape Layer (USL), the cutting path data of the linen. hotwire cutter for the VLM-ST process. USL is a three-dimensional layer with a thickness of more than 1 mm and a side slope, and it is the basic unit of cutting and building in the VLM-ST process. USL includes data such as layer thickness, positional coordinates, side angles of each layer, hotwire cutting speed, the heat input to the hotwire, and reference shape. The procedure of generating USL is as follows: (1)Generation of the mid-slice from the CAD model, (2)Conversion of the mid-slice into a simply connected domain, (3)Generation to the reference shape for the mid-slice, (4)Calculation of the rotation angle of the hotwire of the cutting system.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.12-20
• /
• 1999

In this paper, method for mapping a three-dimensional shape into the two-dimensional plane will be introduced. This method is referred to geometric modelling and means a transformation between the flat sheet and final surface. The initial blank shape represents the original configuration of the final shape formed into three dimensional surface. The initial constant constant area mapping hypothesis was used in this paper. This technique will be applied to the basic data for an interactive computer design capable of dealing with typical stamping process, including deep parts and complex shapes.

• Fashion & Textile Research Journal
• /
• v.1 no.4
• /
• pp.370-375
• /
• 1999

The aims of this research were to suppose the basic data to the producer for more useful manufactures production. 700 pieces of questionnaire were made and 552 pieces of questionnaire were used for this study. The results of this research are as follows ; Many consumers feel uncomfortable to using the unfinished clothing and by the point we could expect the shape retention finish has great possibilities. Just half percent of the people knew about the shape retention finish. So the producer have to do more advertisement for the shape retention finishing and functions. Generally the consumers are satisfied with the shape retention finished clothing.