• 치과방사선
• /
• 제9권1호
• /
• pp.7-12
• /
• 1979

The author had performed the measurement of the various teeth regions on 200 cases of Full-mouth roentgenogram taken with the measurable Grid to detect the degree of alveolar bone resorption, aged from 20 to 60 years of Korean, and to verify the effective result of measurable Grid as a new device which enables the observers to determine the correct length of images on the periapical standard film. The results were obtained as follows. 1. It was found that the degrees of alveolar bone resorption were different in the various teeth regions. 2. As a whole, alvolar bone resorption of anterior teeth regions was more severe than that of posterior teeth regions. 3. Alveolar bone resorption of mandibular region was more severe than that of maxillary region. 4. In sex difference, alveolar bone resorption of male is more severe than that of female, and it was increased with aging. 5. Measurable grid can be used as an adjunct of evaluation of alveolar bone resorption and of calculating the tooth length.

• 대한치과교정학회지
• /
• 제24권3호
• /
• pp.621-630
• /
• 1994

The purpose of this study was to evaluate root resorption and alveolar bone resorption pattern by jiggling movement. 16 adult cats were divided into 4 groups(6, 12, 18, 24 days). In test side, mesio-distal jiggling force was applied in right maxillary 1st premolar in 3 days cycle In control side, mesial force was applied in left maxillary 1st premolar. Radiographic and histologic observation were performed in 6, 12, 18, 24 days after force application. The results were as follow: 1. Alveolar bone resorption was more severe by jiggling force than by unidirectional force. 2. Root resorption pattern was not different between jiggling force and unidirectional force. 3. Combined pattern of bone resorption and new bone formation appeared in jiggling group. 4. New bone formation began to appear at periapical area of jiggling group after 24 days, because alveolar bone resorption was severe and extrusion resulted.

• 치과방사선
• /
• 제2권1호
• /
• pp.41-46
• /
• 1972

The author had measured the alveolar bone level of periodontal disease on 50 cases of orthopantomogram to detect the degree of alveolar bone resorption of both sexes of Korean. The results were obtained as follows; 1. Alveolar bone resorption of mesial and distal portion was similiar in same patient. 2. The order of alveolar bone resorption was mandibular anterior region, posterior region, canine and premolar region of both jaws. 3. The degree of alveolar bone destruction was severe in shorter root length than longer. 4. The degree of alveolar bone resorption was severe in forth decades.

• 대한치과의사협회지
• /
• 제19권3호통권142호
• /
• pp.279-282
• /
• 1981

The authors observed the degree of alveolar bone resorption on the intraoral roentgenogram of 105 patients who were affected by periodontal disease, and following results were obtained. That is, the alveolar bone resorption due to the periodontal disease showed increased tendency as aging, and severe degree on the mandible in comparison with the maxilla, and revealed sere destruction on the area of mandibular incisors and maxillary molars.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권6호
• /
• pp.462-465
• /
• 2012

Horizontal and vertical ridge augmentation with implant placement was performed, using a block type of autogenous tooth bone graft in a 37-year old male patient. This material was very useful for the case of severe alveolar bone resorption of a single tooth. After 13 months, excellent bony healing was obtained and final restoration was performed successfully.

• 대한치과의사협회지
• /
• 제50권3호
• /
• pp.126-139
• /
• 2012

Loss of dentition can lead to not only compromised esthetics and functions of the patient, but also alveolar bone resorption. Bone grafting with prosthetic reconstruction of the gingiva can be selected for the treatment, and it provides many benefits as prosthetic gingival reconstruction does not require a complicated surgical process and is available within a short period of time, with stable clinical results. However, conventional porcelain fused to metal prosthesis has certain limits due to its size, and deformation after several firing procedures. In this clinical report, the author would like to introduce a patient with severe alveolar resorption who was treated with gingiva-shaped zirconia/titanium CAD/CAM implant fixed prosthesis for esthetic and functional rehabilitation. Clinical reports Clinical report 1, 2 : A case of loss of anterior dentition with atrophied alveolar bone. Implant retained zirconia bridge applied with Procera implant bridge system to simulate the gingiva. Upper structure was fabricated with zirconia all ceramic crown. Clinical report 3, 4 : A case of atrophied maxillary alveolus was reconstructed with fixed implant prosthesis, a CAD/CAM designed titanium structure covered wi th resin on its surface. Anterior dentition was reconstructed with zirconia crown. Conclusion and clinical uses. All patients were satisfied with the outcome, and maintained good oral hygiene. Zirconia/titanium implant fixed prosthesis fabricated by CAD/CAM system was highly accurate and showed adequate histological response. No critical failure was seen on the implant fixture and abutment overall. Sites of severe alveolar bone loss can be rehabilitated by implant fixed prosthesis with CAD/CAM system. This type of prosthesis can offer artificial gingival structure and can give more satisfying esthetics and functions, and as a result the patients were able to accept the outcome more fondly, which makes us less than hard to think that it can be a more convenient treatment for the practitioners.

• 대한치과보철학회지
• /
• 제44권3호
• /
• pp.295-313
• /
• 2006

Statement of problem. Higher fracture rates were reported for Branemark implants placed in the maxilla and for 3.75 mm diameter implants installed in the posterior region. Purpose. The purpose of this study was to investigate the fracture of a fixture by finite element analysis and to compare different diameter of fixtures according to the level of alveolar bone resorption. Material and Methods. The single implant and prosthesis was modeled in accordance with the geometric designs for the 3i implant systems. Models were processed by the software programs HyperMesh and ANSA. Three-dimensional finite element models were developed for; (1) a regular titanium implant 3.75 mm in diameter and 13 mm in length (2) a regular titanium implant 4.0 mm in diameter and 13 mm in length (3) a wide titanium implant 5.0 mm in diameter and 13 mm in length each with a cementation type abutment and titanium alloy screw. The abutment screws were subjected to a tightening torque of 30 Ncm. The amount of preload was hypothesized as 650 N, and round and flat type prostheses were 12 mm in diameter, 9 mm in height were loaded to 600 N. Four loading offset points (0, 2, 4, and 6 mm from the center of the implants) were evaluated. To evaluate fixture fracture by alveolar bone resorption, we investigated the stress distribution of the fixtures according to different alveola. bone loss levels (0, 1.5, 3.5, and 5.0 mm of alveolar bone loss). Using these 12 models (four degrees of bone loss and three implant diameters), the effects of load-ing offset, the effect of alveolar bone resorption and the size of fixtures were evaluated. The PAM-CRASH 2G simulation software was used for analysis of stress. The PAM-VIEW and HyperView programs were used for post processing. Results. The results from our experiment are as follows: 1. Preload maintains implant-abutment joint stability within a limited offset point against occlusal force. 2. Von Mises stress of the implant, abutment screw, abutment, and bone was decreased with in-creasing of the implant diameter. 3. With severe advancing of alveolar bone resorption, fracture of the 3.75 and the 4.0 mm diameter implant was possible. 4. With increasing of bending stress by loading offset, fracture of the abutment screw was possible.

• Journal of Periodontal and Implant Science
• /
• 제24권1호
• /
• pp.64-86
• /
• 1994

The authors have transplanted periodontally involved roots which had been root planed into healthy and periodontally involved extraction sockets, and studied the root resorption patterns as well as its effect on new bone formation and wound healing. Alveolar bone around mandibular premolars of 6 adult dogs has been surgically removed, followed by ligation of orthodontic elastic wires for 8 weeks inducing chronic periodontal disease. After removing the crown portions, roots were extracted, and notches were made on the root surfaces discriminating healthy and periodontally involved areas using burs. Controls and experimental groups were divided as follows. Control I : Transplantation of periodontally involved root into healthy extraction sockets. Control II : Transplantation of periodontally involved root into diseased extraction sockets. Experimental group I : Transplantation of root planed roots into healthy extraction sockets. Experimental group II : Transplantation of root planed roots into diseased extraction sockets. Extraction sockets were sutured after transplantations, completely submerging the roots. Healing progress was histologically observed at 2nd, 8th, 12th, and 20th weeks, and the results were as follows ; 1. No inflammation or infection within the extraction sockets had been observed in all groups throughout the experimental period. 2. Reversal lines were observed at week 2 in all groups, clearly discriminating socket walls and new bone, and numerous blood vessels were observed in the new bone trabeculae. 3. Experimental groups showed markedly less root resorption compared to the controls at week 2, but as time progressed, severe resorptions were present in all groups. 4. Localized areas of new bone ankylosis were observed, and the rest of the areas showed collagen fiber insertion with new bone formation at its periphery. 5. No clear differences were found in healing and alveolar bone regeneration between healthy and diseased extraction sockets. 6. The amount of root resorption and ankylosis had increased up to week 8 and 12, showing ankylosis of new bone and the roots. However, no further increase in ankylosis was observed at week 20. 7. Most of the cementum on healthy roots was directly ankylosed to new bone at week, 2, and were gradually resorbed and replaced by new bone thereafter. These results appear to indicate that root planing may inhibit early root resorption of transplanted roots, but gradual replacement by alveolar bone and collagen fibers eventually occur. Condition of the roots or presence of disease in extraction sockets do not appear to make marked differences in alveolar bone regeneration process.

• 대한치과보철학회지
• /
• 제56권2호
• /
• pp.120-125
• /
• 2018

기존의 의치 인상채득 방법은 치조제 흡수가 심한 환자에게 사용하기에 한계점이 있으며, 의치상을 과도하게 연장하여 문제를 발생시킬 수 있다. 특히나 가동성조직이 존재하는 경우에는 정확한 인상 채득을 하기가 어렵고, 따라서 총의치의 적절한 안착을 방해할 수 있다. 치조제 흡수가 심한 환자에서 폐구법 인상을 이용하여 총의치를 제작하면 더 나은 안정성과 유지를 얻을 수 있다. 본 증례는 86세의 여자환자로 상악 전치부에 치은열성비대가 존재하며 하악의 심한 치조제 흡수를 보이는 무치악 환자이다. 따라서 Centric tray를 이용하여 잠정적인 교합고경을 결정 후 고딕아치 장치를 부착한 맞춤형 트레이를 제작하였고, 폐구법 인상채득을 시행하여 상하악 총의치를 제작하였으며, 의치의 충분한 안정성과 유지력을 얻어 환자의 만족도를 높였다.

• 구강회복응용과학지
• /
• 제28권1호
• /
• pp.1-13
• /
• 2012

짧은 임플란트는 상악동이나 하치조신경 등의 해부학적 구조물이 있거나 심한 치조골 흡수로 인해 제한적인 치조제 높이를 가지는 부위에서 사용되고 있다. 본 연구는 길이 10 mm 이하의 임플란트에서 임플란트의 길이, 직경, 식립 부위, 골이식술 유무, 보철물의 연결고정 유무가 임플란트의 생존율과 변연골 흡수에 미치는 영향을 알아보고자 하였다. 원광대학교 치과병원 임플란트센터에서 길이 10 mm 이하의 임플란트를 식립한 137명의 환자, 227개 임플란트를 대상으로 진료 기록부를 통해 임플란트의 길이, 직경, 식립 위치, 골이식 유무, 보철물의 연결고정 유무를 조사하였다. 변연골 흡수량은 Emago advanced v5.6(Oral diagnostic systems, Amsterdam, The Netherlands) 프로그램을 이용하여 측정하였다. 총 227개의 임플란트 중 8개가 실패하여, 전체 짧은 임플란트의 생존율은 96.5 %로 나타났다. 골이식 부위와 상악에 식립된 경우 더 높은 실패율을 보이는 경향이 있었으며, 임플란트의 길이와 직경은 변연골 흡수량에 영향을 미치지 않았다. 실패 요인을 조사하였을 때, 상악의 불량한 골질과 골이식 유무가 임플란트의 더 높은 실패율에 영향을 미쳤다. 10 mm 이하 임플란트에서 길이, 직경, 식립 부위, 골이식술과 보철물의 연결 고정은 임플란트 생존율과 변연골 흡수량에 영향을 끼치지 않았다.