• 한국환경과학회지
• /
• 제20권12호
• /
• pp.1533-1540
• /
• 2011

This study was conducted to identify the sedimentation quantity and settling velocity, sediment fundamental data that an important position of water quality management of Seston, POC, PP and PN in Nakdong river basin using a sediment traps to collect suspended material pollutants. Nakdong river basin is that average sedimentation quantity of seston, POC, PP and PN were 124~1,125 g/$m^2$/d, 2,963~25,072, 26~347, 445~2,184 mg/$m^2$/d, respectively. Settling velocity of Seston, POC, PP and PN were 17.0, 35.5, 8.7, 2.4 m/d. It was appeared that various results according to the river flow, weather and other environmental factors. There was no significant correlation, each suspended material pollutants. Sedimentation rates are likely to be overestimated because the flow is not considered to resuspended materials. Therefore diversification through continued monitoring is needed to be analyzed.

• 공업화학
• /
• 제19권6호
• /
• pp.609-616
• /
• 2008

본 연구는 크기가 다른 두 종류의 입자를 가진 비(非)콜로이드성 현탁액의 평균 침강 속도를 예측하는 수치적 방법을 제공한다. 이 방법은 무수히 많은 입자들이 유체에 불규칙적으로 분포된 현탁액 시스템의 유체 속도, 온도 등의 물리량을 앙상블 평균의 개념을 사용해서 표현하는 유효 매체 이론에 기초한다. 본 연구에서는 Acrivos와 Chang[1]이 단일(單一) 입도 현탁액에 대해 제안한 모델을 이중(二重) 입도 현탁액에 응용한다. 구체적으로 방사 분포 함수(radial distribution function)에 대한 계산과 stream function을 이용하여 침강 속도를 계산하고 그 결과를 Davis와 Birdsell[2]과 Cheung 등[3]의 실험 결과와 비교하였다. 그 결과 본 연구의 모델에 의한 예측이 실험 결과와 일치하는 것으로 나타났다.

• 한국해양공학회지
• /
• 제16권1호
• /
• pp.16-22
• /
• 2002

The diffusion characteristics of an ocean dumping material in the south-eastern East/Japan Sea related to regulate the physical characteristics with the observation and the hydraulic experiment are investigated. The main results are as follows; (1) Spying CTD observation result of the area of Jung in the East/Japan Sea, the ocean dumping area had influenced the Tsushima Warm Current of high temperature and salinity. Horizontal turbulent diffusivity is 1.913$\times$10$^{7}$ by drogue tracking. (2) From the experiment of settling, the initial settling velocity of each material is 1.0~2.7 cm/sec according to the specific gravity and initial concentration. In the pycnocline, particles didn't settle under the pycnocline any more and accumulated. It is signified that calculation of the sedimentation rate of the ocean dumping material including of vertical diffusion must be regard the pynocline in the ocean area have well-developed pycnocline. (3) Vertical turbulent diffusivity were 2.219$\times$10$^{-8}$ ~8.874$\times$10$^{-4}$ cm$^2$/sec from the experiment of settling. And, the pycnocline influenced the vertical turbulent diffusivity.

• 환경영향평가
• /
• 제14권5호
• /
• pp.263-273
• /
• 2005

In this study, the major emission procedures and emission characteristics were identified at the site of sewage treatment plant which is one of the major sources of ammonia. At the same time the emission factors and emission rates were estimated. In order to calculate the emission flux, we used a Dynamic Flux Chamber(DFC), which is found to be a proper sampling devise for area sources such as sewage treatment plant. It was found that the most stable sampling condition was when the stirrer's speed of DFC was 120RPM, and it would be the best time to take a sample 60 minutes later after setting the chamber. The relatively higher flux was shown in Autumn compared to summer and winter. Annual ammonia emission rates procedures were calculated as $906.32{\mu}g/activity-ton$, $1,114.72{\mu}g/activity-ton$ and $437.53{\mu}g/activity-ton$ each at the primary settling basin, aeration basin and the final settling basin, respectively. The ammonia emission rate the highest at in the aeration basin according to this test. This results was due to that the surface of aeration basin or the final settling basin is relatively wider than the primary settling basin.

• 자원리싸이클링
• /
• 제2권2호
• /
• pp.16-21
• /
• 1993

본 연구에서는 폐수중에 함유된 철이온을 제거하기 위하여 2가와 3가 칠이온을 함유하는 용액의 pH를 침전점이상으로 조절함으로서 형성된 수산화철 침전의 침강 특성을 조가하여 다음과 같은 결과를 얻었다. 수산 이온의 농도 증가는 수산화철 침전의 침강 속도를 빠르게 하고 이때 CaO가 효과적이었다. 고분자 엉김제는 수산화철 침전의 초기 침강 속도를 빨라지게 하지만 과량은 침강 속도를 저하시킨다. 수산화철 침전의 농도가 높아지면 침강 속도가 크게 감소되므로 수산화물로서 침전시켜 제거할 철이온의 농도는 $10^{-2}$mol/ㅣ이하로 조절됨이 바람직하다.

• 대한치과교정학회지
• /
• 제47권3호
• /
• pp.207-212
• /
• 2017

The popularity of clear overlay retainers (CORs) has increased recently because of their advantages such as better esthetics, cost effectiveness, easy fabrication, and good compliance. However, a deficiency in posterior occlusal settling is a reported limitation of CORs. The aim of this study was to evaluate the posterior occlusal contact changes in a new type of clear orthodontic retainer called Oral-treaper (OTP), which consists of three layers and has stronger mechanical characteristics than do conventional retainers. Three patients who completed fixed orthodontic treatment received OTP as a removable retainer. Cast models were fabricated after the removal of fixed appliances (T1) and after 4 to 11 months of using the retainers (T2). We evaluated all the cast models to compare the post-orthodontic settling pattern during the use of the OTPs. The depth of occlusal contacts was evaluated using color maps. The OTP did not prevent vertical settling in all patients but resulted in an improvement in posterior occlusal contact points.

• 상하수도학회지
• /
• 제20권2호
• /
• pp.295-302
• /
• 2006

Over the past decades, a flocculation and/or sedimentation process have been adopted to remove pollutants from CSOs. It has been learned that major factors affecting settlement of pollutants are the particle size distribution, their settling velocities and their specific gravity. It is, therefore, a good idea to analyze the particle size distribution and settleability of CSOs pollutants in order to develop details in designing a process. Discussed in this study are pollutant characteristics of CSOs such as particle size distribution and settleability of pollutants. The power law function is applied and is found to be an effective and reliable index for expressing the particle size distribution of pollutants in CSOs. Based on the regression analysis it is observed that the derived constants of curves representing settling velocity profile are proportional to the initial concentration of particles and to the ${\beta}$-values of power law distributions.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권6호
• /
• pp.102-111
• /
• 2012

Fine suspended solids generated effluence from treatment process of mine drainage could destroy environment as the aesthetic landscapes, and depreciate water quality. Therefore, the purpose of this research is focused on process development applied the actual field for controlling fine suspended solids and heavy metals, and so lab-scale test was performed for inducement of basic data. The mine drainage used in this research was sampled in H mine located Jeongseon-gun, Gangwon-do. Concentration of suspended solid, arsenic, iron and manganese was exceeded the standard of contaminant limitation for the clean water, and particle size of suspended solid was less than 10 m as fine particle. Although hydraulic retention time of mine drainage for effective settling was required more than 6 hours, hydraulic retention time would be increased in winter season when the settling efficiency could be reduced because of viscosity decreasing. Moreover, installed inclination plate helped to increase settling efficiency of suspended solid about 48 %. Filtering media that was the most effective removal of suspended solids and heavy metal was decided granular activated carbon of 1~2 mm was the optimal size.

• 한국수자원학회논문집
• /
• 제37권4호
• /
• pp.293-304
• /
• 2004

침전지는 수처리 공정에서 중요한 조작 중 하나이며, 침전지내에서는 응집과 침전이 일어남에 따라 입자의 크기분포가 변하는 복잡한 현상이 발생한다. 따라서 침전지의 효율적인 설계나 운영을 위해서는 이러한 현상에 대해 이해해야만 하며, 침전효율의 극대화를 위한 연구가 필요하다. 본 연구에서는 침전지내의 흐름을 모의하기 위하여 범용 CFD 프로그램인 FLUENT를 이용하였으며, 침전효율을 평가하기 위하여 FLUENT에서 제공되는 입자추적기법을 사용하였다. 또한 침전지의 형상을 지나치게 단순화시키는 기존의 연구와는 달리 본 연구에서는 실제 현장에서 사용되는 규모와 침전지내 인자들 (유입부 정류벽, 유출부 트라프 등)이 수치모의에 최대한 반영되었으며, 현장실험의 결과를 바탕으로 민감도 분석을 수행해 수치모의에 사용되는 매개 변수들을 보정하였다. 민감도 분석 결과 입자의 직경이 입자의 밀도에 비해서 민감도가 큰 것으로 나타났고, 침전효율이 실헐결과와 가장 잘 일치할 때의 직경값을 결정해본 결과 입자의 직경값이 26.5 $\mu\textrm{m}$로 나타났다.

• 한국방재학회 논문집
• /
• 제9권4호
• /
• pp.107-113
• /
• 2009

본 연구는 점착성 미립자의 침전률에 대한 플록의 영향에 관한 것이다. 연구 진행시 플록 밀도와 입경변화의 영향도 고려하였다. 플록입자의 침전속도는 정지수면에서 측정되었다. 플록 입경과 밀도는 수정된 Stokes방정식에 유체의 밀도, 입자의 밀도, 점성계수 및 측정된 침전속도와 입경과의 관계식으로부터 얻은 플록 차원을 이용하여 분석되었다. 석영과 알루미나의 플록지름은 초기농도가 증가함에 따라 증가되었으며, 염도농도의 증가에 따른 석영의 플록된 입경은 $0.8{\sim}10$ ${\mu}m$이다. 플록밀도는 입경이 증가함에 따라 감소하였다. 플록 침전속도와 입경의 관계는 로그표위에 직선식으로 표현된다. 플록 차원($=n_f$)은 초기농도가 증가할 경우 2.65이며, 염도가 증가할 때 2.93이다. 침전속도를 예측하기 위한 비례상수(n)는 제시되었으며, 그 범위는 $1{\sim}1.93$이다.