• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.1
• /
• pp.33-39
• /
• 2011

This paper considers a performance analysis of set-top box (STB) power saving schemes. STB converts the signal into content which is then displayed on the television (TV) screen, and there are typically two operation modes: on mode and stand-by mode. The total energy consumption (TEC), a typical measure of power consumption of STB, is defined by the sum of power consumption in each mode. Recently there are some works of STB power saving schemes that transit STB operation modes efficiently, and the mode transition time point of those schemes can be different. Thus it is required to develop a performance evaluation method that reflects mode transition time points of each scheme to get TEC correctly. This paper proposes a performance evaluation method for STB power consumption using Poisson process to consider the mode transition time point. By modeling STB mode transitions as events of Poisson process, the average time duration of STB mode is computed and accordingly the effect of power saving is evaluated. The performance evaluation result shows that the proposed method achieves 1 to 19% improvement in power consumption compared with a conventional performance evaluation method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.323-328
• /
• 2002

Rapid set accelerators are widely used in tunnel construction, however quality criteria of and dosage are not well established. The density and solid content of admixtures, setting time and compressive strength of paste and mortar with admixtures were investigated to establish the quality criteria. While the early strength of mortar with sodium-silicate, sodium-aluminate and calcium aluminate type admixtures that have high alkali content are very high, but long-term strength are low. Aggregates of shotcrete has to be carefully selected. Sodium-silicate type admixture need longer setting time than the others.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.352-357
• /
• 1987

The Auto Tuning Controller is designed using Fuzzy set theory. And to verify its validity it is Applied to the Auto Tuner of hydraulic Control System. Fuzzy Tuning Procedures are written by linguistic model and translated into C language formation by preprocessor. Then it is executed with state feedback controller in real time, Fuzzy Logic Controller adjusts state feedback gain by proper tuning logic in each step to satisfy the desired maximum overshoot and settling time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.1
• /
• pp.1-7
• /
• 2014

This paper proposes an efficient test wrapper design that reduces overall test time in multi-core SoC. After initial local wrapper solution sets for all the cores are determined using well-known Combine algorithm, proposed algorithm selects a dominant core which consumes the longest test time in multi-core SoC. Then, the wrapper characteristics in the number of TAM wires and the test time for other cores are adjusted based on test time of the dominant core. For some specific cores, the number of TAM wires can be reduced by increasing its test time for design space exploration purposes. These modified wrapper characteristics are added to the previous wrapper solution set. By expanding previous local wrapper solution set to global wrapper solution set, overall test time for Multi-core SoC can be reduced by an efficient test scheduler. Effectiveness of the proposed wrapper is verified on ITC'02 benchmark circuits using $B^*$-tree based test scheduler. Our experimental results show that the test time is reduced by an average of 4.7% when compared to that of employing previous wrappers.

• Journal of Internet Computing and Services
• /
• v.1 no.2
• /
• pp.11-18
• /
• 2000

In this paper we present a new extensible model based upon the concept of subtransactions in real-time transaction systems. The nested transaction model originally proposed by J. Moss is extended for real-time uniprocessor transaction systems by adding explicit timing constraints. Based upon the model, an integrated concurrency control and scheduling algorithm is developed, that not only guarantees timing constraints of a set of real-time transactions but also maintains consistency of the database. The algorithm is based on the priority ceiling protocol of Sha et al. We prove that the Real-Time Nested Priority Ceiling Protocol prevents unbounded blocking and deadlock, and maintains the serializability of a set of real-time transactions. We use the upper bound on the duration that a transaction can be blocked to show that it is possible to analyze the schedulability of a transaction set using rate-monotonic priority assignment. This work is viewed as a step toward multiprocessor and distributed real-time nested transaction systems. Also, it is possible to be extended to include the real-time multimedia transactions in the emerging web-based database application areas.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.9
• /
• pp.143-150
• /
• 2019

The purpose of this study was to propose how to determine the setting time related to the determination of the surface finish working time of the concrete using a Durometer, which is used as a rubber hardness meter. Two different types of Durometer were used to measure the setting time of the concrete. High flowing concrete with 40% of water to binder ratio was fabricated maintaining $600{\pm}100mm$ of slump flow. The test results indicated that the application of the Durometer resulted in a high correlation with the penetration resistance tester in both mortar and concrete. When measuring the setting time of the concrete, with properly used with Durometer, evaluation of the setting time of the concrete can be available. Therefore, it is thought that the measurement of the final set of the durometer C type can be useful to decide the limit time of the finishing operation and the time of the rejuvenation of the curing process by measuring the finishing set at 40 HD in the case of the initial set and 10 HD in the case of D type.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1-6
• /
• 2003

This paper considers the problem of determining a set of stabilizing first order controller gains, for a given linear time invariant plant, that meets or exceeds closed loop step response specifications. The method utilizes two recent results: For a given system, (1) finding a set of stabilizing first order controller gains and (2) the relationship between time response (overshoot and speed) and the coefficients of the characteristic polynomial. The method allows us to extract a subset of first order controller gains that meets stability as well as time domain performance requirements. The computations involved are the intersections of two dimensional sets described by linear and quadratic inequalities in the controller design space. It is illustrated by examples.

• The Journal of Korea Robotics Society
• /
• v.12 no.3
• /
• pp.322-331
• /
• 2017

In this paper we present a novel robotic palpation method for the lump shape estimation using contact pressure distribution. Many previous researches about the robotic palpation have used a stiffness map, which is not suitable to obtain geometrical information of a lump. As a result, they require a large data set and long palpation time to estimate the lump shape. Instead of using the stiffness map, the proposed palpation method uses the difference between the normal force direction and the surface normal to detect the lump boundary and estimate its normal. The palpation trajectory is generated by the normal of the lump boundary to track the lump boundary in real-time. The proposed approach requires small data set and short palpation time for the lump shape estimation since the shape can be directly estimated from the optimally generated palpation trajectory. An experiment result shows that our method can find the lump shape accurately in real-time with small data and short time.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.3
• /
• pp.130-138
• /
• 2009

Bromilow's time-cost (BTC) relationship was examined for building projects in Vietnam using actual construction time and total construction cost. Data set was collected from 77 historical building construction projects completed between 1999 and 2005 which were adjusted by consumer price index (CPI) to 2000 price. Time-cost equations were specified respected to two sectors, public and private, in Vietnamese construction industry and all cases. It is shown that a public funded building project has the longer construction duration than a similar budget private funded project. The resulting models are statistically significant. The adjusted R-square coefficients of all cases, public and private projects models are respectively 0.403, 0.436 and 0.377 mean that the BTC regression lines moderately fit the data set.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.259-260
• /
• 2011

Using modern techniques from scientific computing and numerical analysis, natural phenomena or scientific experiment can be simulated effectively with a computer and used for computer graphics, for example as special effects for the film industry, manufacturing the thin film, multi-phase simulation and image processing. The Level Set method can make those things happen without a lot of difficulties. This method was devised by Osher and Sethian(1988) to represent dynamically moving interfaces as the zero level set of a scalar function that evolves in time. Since then, many researchers have worked on many applications using a Level Set Method. I will give a talk about the applications of the Level Set Method.