• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.923-929
• /
• 2021

TCP communication and packet communication require transmission control technology to ensure high quality and high reliability. However, in the case of real-time data transmission, an inefficient transmission problem occurs. In order to overcome this problem and transmit the packet reliability, in general, early congestion control using the buffer level as an index was used. Control of the congestion control point and the cancellation point is delayed because the point at which congestion is controlled is based on the buffer level. Therefore, in this paper, not only the buffer level indicator, but also the ideal buffer level, which determines the packet discard probability, is classified so that the transmission rate and buffer level that measure network congestion are close to the level above the optimal setting. As a result, it was shown that the average buffer level can be directly controlled by maintaining the average buffer level by the ideal buffer level set in the experiment to prove the proposed method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.7
• /
• pp.346-353
• /
• 2000

In this paper, a fuzzy logic controller is designed for position control of an Arage disk. The Arage disk system is an experimental set to exploit Arago's disk phenomenon which is the operation principle of induction motors. Since the Arage disk system operates in stable, maginally stable, and unstable regions, it is suitable as a test system to evaluate efficiency of various control system design methods. It is shown that the fuzzy logic controller shows good responses for multi-operating points of Arage disk system, while the controllers using linearized models are able to control the system on only one operating point.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10a
• /
• pp.724-728
• /
• 1987

Recently, two degrees of freedom PID control systems have attracted attention, because of their better process control quality for both set point variable tracking and disturbance resistivity than that of conventional PID control systems. This paper describes a new auto-tuning method for the two degrees of freedom PID control system based on a newly developed model matching method in the frequency domain. This new method has been introduced into a two degrees of freedom PID auto-tuning controller, named AdTune TOSDIC-21D8. The superior features of the controller and the results of field tests Are presented.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.77-78
• /
• 2006

A mixed method between $H_2\;and\;H_{\infty}$ control are widely applied to systems which has parameter perturbation and uncertain model to obtain an optimal robust controller. Brushless Direct Current (BLDC) motors are widely used for high performance control applications. Conventional PID controller only provides satisfactory performance for set-point regulation. However, with the presence of nonlinearities, uncertainties and perturbations in the system, conventional PID is not sufficient to achieve an optimal robust controller. This paper presents an approach to ease designing a Mixed $H_2/H_{\infty}$ PID controller for controlling speed of Brushless DC motors and the genetic algorithm is used to solve the optimized problems. Numerical results are shown to prove that the performance in the proposed controller is better than that in the optimal PID controller using LQR approach.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.1
• /
• pp.27-38
• /
• 1992

The paper presents a digital speed control approach of induction motor systems by using a digital redesign method and adopting a well known 2nd order model as the system model equation. The basic concept using the modeling equation is induced from the control theory stand point such that we can describe usually the motor system connected by inverter, generator and load etc. just as a mechanical system to be controlled. The concept does not demand us the complicated vector-based modeling equation adopted in the traditional methods for the speed control of induction motor. The effectiveness of the servo control system composed by the above mentioned design concept is illustrated by the experimental results in the presence of step reference change and generator load variation. It is observed from the experimental results that the steady state error of the experimental set up becomes zero after some regulation time and the induction motor system is robust in spite of reference signal change and load variation of generator.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.728-730
• /
• 1998

The control valve positioner is a high gain plain proportional controller which measures the valve stem position and compares it to its setpoint which is the primary controller output. The positioner in effect is the cascade slave of the primary controller. In order for a cascade slave to be effecttive, it must be fast enough compared to the speed of its set point change. This paper describes the positioner transfer function and its effect on the entire control loop characteristic based on the simulation results. The result showed that the control valve and positioner determined the gain and phase angle in the high frequency range, while the primary controller and process determined those of the low frequency range. We can also anticipate the combined characteristics in the whole frequency range when each element's frequency response is known.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.4 no.1
• /
• pp.24-34
• /
• 1994

A RMFSOC(Reference Model Following Self-Organizing Fuzzy Logic Controller) is propose in this paper. In the RMFSOC, the refernce model is introduced, where the desired control performance can be specified by an operator of the controlled process. The self-organizing level of the RMFSOC organizes the control rules of FLC which make the process output follow the reference model output. In addition, for the use of preventing improper modifications of control rules, a complementary decission rule is induced from the possible relations between the process output and reference model output. Through a simulation study, it is shown that the robustness of the control system using the proposed RMFSOC to the set-point changes and distur bances can be greatly improved being conpared with that of the control system using the Procyk and Mamdani's SOC.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.869-875
• /
• 2012

Because of the nature of wind, the output power of wind turbines fluctuates according to wind speed variation. Therefore, many countries have set up wind-turbine interconnection standards usually named as Grid-Code to regulate the output power of wind farms to improve power system reliability and power quality. This paper proposes three operation modes of wind farms such as maximum power point tracking (MPPT) mode, single wind turbine control mode and wind farm control mode to control the output power of wind turbines as well as overall wind farms. This paper also proposes an operation scheme of wind farm to alleviate power fluctuation of wind farm by choosing the appropriate control mode and coordinating multiple wind turbines in consideration of grid conditions. The performance of the proposed scheme is verified via simulation studies in PSCAD/EMTDC with doubly-fed induction generator (DFIG) based wind turbine models.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6759-6765
• /
• 2015

In this study, the effects of control strategies of night-purge control system on control characteristics and energy consumption for central cooling system in building are researched by simulation. The start time and set-point temperature for night-purge control with outdoor temperature changes and building cold storage performance are obtained. The system analysis modelling is done by using TRNSYS program package, and the control performances with suggested night-purge control method are compared with the existing control ones. As a result, the suggested night-purge control method shows maximum 16.8% and 28.6% energy saving in comparison with existing control method and conventional one without night-purge control, respectively.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.4
• /
• pp.336-349
• /
• 2001

Intelligent Network (IN) is an architectural framework for the rapid and uniform provision of advanced services. Therefore, Next-generation IN platform should support fast service handling, the dynamic adaptation of various services according to various requirements of users. In this paper, we design and implement the Service Control Point (SCP) that is based on the Internet environment. Especially, we consider the service flexibility, the dynamic distribution of service and propose a set of mechanisms to optimize the performance of this platform. This SCP consists of the platform kernel to control intemal operations, tbe service manager to control all of services, SLPI (Service Logic processing Program Instance) manager to manage each service, and SLPI to handle service interaction. In addition, we propose the Service Creation Environment (SCE) to create easily services on the implemented platfonn and show the example of Call Forwarding service operated on this platform.