DOI QR코드

DOI QR Code

Operation Scheme for a Wind Farm to Mitigate Output Power Variation

  • Received : 2011.05.19
  • Accepted : 2012.07.15
  • Published : 2012.11.01

Abstract

Because of the nature of wind, the output power of wind turbines fluctuates according to wind speed variation. Therefore, many countries have set up wind-turbine interconnection standards usually named as Grid-Code to regulate the output power of wind farms to improve power system reliability and power quality. This paper proposes three operation modes of wind farms such as maximum power point tracking (MPPT) mode, single wind turbine control mode and wind farm control mode to control the output power of wind turbines as well as overall wind farms. This paper also proposes an operation scheme of wind farm to alleviate power fluctuation of wind farm by choosing the appropriate control mode and coordinating multiple wind turbines in consideration of grid conditions. The performance of the proposed scheme is verified via simulation studies in PSCAD/EMTDC with doubly-fed induction generator (DFIG) based wind turbine models.

Keywords

References

  1. K. Yoshimoto, T.Nanahara, and G. Koshimizu, "New control method for regulating state-of-charge of a battery in hybrid wind power/battery energy storage system," in Proc. IEEE power Syst. Conf. Expo., Oct. 29-Nov. 1, 2006, pp. 1244-1251.
  2. "Focus on 2030: EWEA aims for 22% of Europe's electricity by 2030," Wind Directions, pp. 25-34, Nov./Dec. 2006.
  3. A.D. Hansen, L.H. Hansen, "Wind Turbine Concept Market Penetration over 10 Years(1995-2004)", Wind Energy 10, 81-97, 2007. https://doi.org/10.1002/we.210
  4. Ireland National Grid, "Wind Farm Power Station Grid Code Provisions", Grid Code Version 2, WFPS1, pp. 213-216, 2007.
  5. E. Muljadi, C. P. Butterfield "Pitch-controlled variable-speed wind turbine generation," IEEE Transactions on Industrial Applications, 37 (1), pp. 240-246, 2001 https://doi.org/10.1109/28.903156
  6. Gilsung Byeon, "Modeling and Control of a Doubly- Fed Induction Generator (DFIG) Wind Power Generation System for Real-time Simulations," Journal of Electrical Engineering & Technology Vol. 5, No. 1, pp. 61-69, 2010 https://doi.org/10.5370/JEET.2010.5.1.061
  7. S. Heier, Grid Integration of Wind Energy Conversion System. Chichester, U.K.: Wiley, 1998.
  8. O. Wasynczuk, D. T. Man, and J. P. Sullivan, "Dynamic behavior of a class of wind turbine generators during random wind fluctuations," IEEE Trans. Power App. Syst., Vol. PAS-100, No. 6, pp. 2837-2854, Jun. 1981. https://doi.org/10.1109/TPAS.1981.316400
  9. E. Barklund; "Energy Management in Autonomous Microgrid Using Stability Constrained Droop Control of Inverters", IEEE Trans. Power Electronics, Vol. 23, No. 5, September 2008.
  10. Young-Ho Park, "A New Control Scheme to Regulate the Active Power Output of a Doubly Fed Induction Generator in Changing Wind Speed", Thesis of Master Course in Seoul National University, Korea, August 2007.

Cited by

  1. Maximum power point tracking without current sensor for photovoltaic module integrated converter using Zigbee wireless network vol.56, 2014, https://doi.org/10.1016/j.ijepes.2013.11.020
  2. Hardware-in-the-loop Simulation Method for a Wind Farm Controller Using Real Time Digital Simulator vol.9, pp.5, 2014, https://doi.org/10.5370/JEET.2014.9.5.1489
  3. Hybrid Reference Function for Stable Stepwise Inertial Control of a Doubly-Fed Induction Generator vol.11, pp.1, 2016, https://doi.org/10.5370/JEET.2016.11.1.086
  4. Design of DC Side Voltage and Compensation Analysis of THD for Shunt Power Quality Controller under System Load of Rectifier with R-L Load vol.10, pp.1, 2015, https://doi.org/10.5370/JEET.2015.10.1.030
  5. Controller Design of a Novel Power Conditioning System with an Energy Storage Device for Renewable Energy Sources under Grid-Connected Operation vol.13, pp.3, 2013, https://doi.org/10.6113/JPE.2013.13.3.390
  6. Stepwise Inertial Control of a Doubly-Fed Induction Generator to Prevent a Second Frequency Dip vol.10, pp.6, 2015, https://doi.org/10.5370/JEET.2015.10.6.2221