• Korean Journal of Materials Research
• /
• v.13 no.10
• /
• pp.651-657
• /
• 2003

Ultrasonic microscope has been used to detect the defects on surface or inner solid. Conventionally, it has used at a single operating frequency. The resolution and quality of the measured images are determined by a characteristic of the transducer of the ultrasonic microscope. The conventional ultrasonic microscope has been used envelope detector to detect the amplitude of reflected signal, but the changes in amplitude is not sensitive enough for specimen with microstructure that in phase. In this paper, we have studied multi-frequency depth resolution enhancement with ultrasonic reflection microscope for the reflectors of a stainless steel reference specimen and a reference calibration block to be used as the material in nuclear power plants for ISI, PSI. Increased depth resolution can be obtained by taking two, three-dimensional images at more that one frequency and numerically combining the results. As results of the experiment, we could get enhanced images with the rate of contrast in proportion and high quality signal distribution for the image to the changing rate of depth for the reflectors of the two kinds of specimens.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.1003-1019
• /
• 2019

Threshold ring signature scheme enables any t entities from N ring members to spontaneously generate a publicly verifiable t-out-of-N signature anonymously. The verifier is convinced that the signature is indeed generated by at least t users from the claimed group, but he cannot tell them apart. Threshold ring signatures are significant for ad-hoc groups such as mobile ad-hoc networks. Based on the lattice-based ring signature proposed by Melchor et al. at AFRICRYPT'13, this work presents a lattice-based threshold ring signature scheme, employing the technique of message block sharing proposed by Choi and Kim. Besides, in order to avoid the system parameter setup problems, we proposed a message processing technique called "pad-then-permute", to pre-process the message before blocking the message, thus making the threshold ring signature scheme more flexible. Our threshold ring signature scheme has several advantages: inherits the quantum immunity from the lattice structure; has considerably short signature and almost no signature size increase with the threshold value; provable to be correct, efficient, indistinguishable source hiding, and unforgeable.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.182-191
• /
• 2015

The automatic dependent surveillance - broadcast (ADS-B) system which is a core system of aviation system block upgrade is designed and implemented. The ADS-B system consists of the 4 blocks and 10 units, and filtering algorithm is applied to the implemented ADS-B system. To evaluate a performance of the implemented ADS-B system, real aircraft position data is used and compared reliable radar data. The comparison results show that average position difference of 99.57 m. In addition, comparisons of aircraft position data between the implemented ADS-B system employing filtering algorithm and the conventional ADS-B system under various situations are carried out, such as aircraft turning, taking off, landing, and cruising. The comparison results show that average position difference of 8.02 m.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.791-796
• /
• 2020

In this paper, "Q-Bone", a 3^rd generation blockchain platform with enhanced security and flexibility, was developed. As a 3^rd generation blockchain platform, it exploits BP (block producer) to increase processing speed. It has many advantages as follows. It improves both security and speed by mixing RSA (Rivest-Shamir-Adleman) and AES (advanced encryption standard). It improves flexibility by exploiting gateway to convert between apps and blockchain with different programming language. It increases processing speed by combining whole transactions into one block and distribute it when too many transactions occur. It improves search speed by inserting sequence hash into transaction data. It was implemented and applied to pet communication service and academy-instructor-student matching service, and it was verified to work correctly and effectively. Its processing speed is 3,357 transactions/second, which shows excellent performance.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.91-96
• /
• 2020

A blockchain is a technology in which all nodes participating in a distributed network manage each transaction's contents without a central server managing the transaction, which is a record of the transaction. The block containing the transaction record of a specific period is connected to the blockchain by referring to the hash value for the previous block, and the chain with the new block added is shared with all nodes again. Transactions using existing certificates will pass through FinTech, and in the near future, applications using blockchains are expected to emerge. In this study, we analyze the problems of the existing model, and propose a transaction model that applies the blockchain to come. Among various applications, this study develops a trading model targeting the energy sales market among the topics that will lead the fourth industrial revolution. As a result of analyzing the proposed model, it was possible to be sure of the possibility of a safer energy sales transaction than the existing method.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.31-38
• /
• 2011

As the percentage of permeable ground is reduced due to the increased impermeable roads of major cities, a heat island phenomenon can be dominantly observed, resulting in increased temperature. In addition, rainfall that would have been naturally absorbed and retained by the permeable ground is overflowed due to large volumes of run-off water, resulting in more sewer failures and increased erosion. In terms of permeable pavement system, block paving has been used anywhere as well as provides many years of service. The permeable block paving is an effective alternative to the more traditional asphalt or plain concrete for minor roads; furthermore, it looks a lot better than other pavements. In this study, the functional drainage evaluation of block paving was carried out, considering the usage of experimental sludge and wheel tracking test, in order to simulate the field condition of roads.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.6
• /
• pp.472-477
• /
• 2013

This paper carried out the comparative analysis on ground impedance of a carbon block and a copper rod. Two types of grounding electrode were compared ; a carbon block (L : 1 m, ${\Phi}$ : 245 mm) buried at a depth of 0.8 m and a three-linked copper rod (L : 1 m, ${\Phi}$ : 10 mm) of equilateral triangles with 1 m spacing. Ground impedance depending on applied current source was evaluated by the application of a sine wave current with 60 Hz ~ 3.5 MHz, a fast-rise pulse with rising time of 200 ns, a standard lightning impulse of $8/20{\mu}s$ and a 600 Hz square wave. Ground impedance for both electrodes were almost the same value below 100 kHz, and increased rapidly afterwards. The maximum ground impedance appeared $400{\Omega}$ at around 1.5 MHz. Ground impedance of the carbon block was lower at the square wave and was higher at fast-rise pulse than that of the copper rod. Also, ground impedance as ages showed no difference for the last 8 months. From the results, it is likely that ground performance for both electrodes shows no difference against commercial frequency and lightning impulse current, while the copper rod shows better performance against a fast-rise pulse with rise-time of a few hundred ns.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.34-64
• /
• 1989

Corner block with anchor bolt(CBA) joint method used in knock-down type table furniture manufacturing can reduce the packing and transporting cost. Unfortunately. it also has the disastrous defect to be loosend and unstable during the service life mainly due to fatigue and creep(repeated and prolonged loading). So 22 joint groups constructed were tested to evaluate the effect of some design factors related to the size of side rail(apron). block attachment to side rail. and the number of anchor bolt as well as the effect of the type of corner block(mitered type vs. rectangular type) Usable strength from the stiffness coefficients of each joint group were analysed with SPSS /PC+ and described as the criteria of CBA joint construction. The conclusions were as follows: The height of side rail(50, 75 and 100 mm) and the addition of polyvinyl acetate(PVAc) emulsion in the corner block attactment to side rail had the effect on raising the usable strength of CBA joint with remarkable high significance. And the effect of 2 - anchor bolts was also superior to that of 1 - bolt significantly. However. the thickness of side rail(22 mm vs. 25 mm) had no effect on the strengthening the table joint rigidity. Mitered type corner block joint appeared to he recommendable for CBA jointed table construction rather than the rectangular type one regardless of the method of block attachment to side rail. The best result identified from Duncan's multiple comparison was in the construction with 25 mm thick and 100 mm height of side rail fastened using 2 - anchor bolts in mitered type corner block. But it would be reasonable to use 22 mm thick & 75 mm high side rail and mitered corner block with PVAc emulsion & 2 bolts considering the productivity and production cost down in the MDF furniture manufacturing industries.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.48
• /
• pp.57-76
• /
• 2010

This study reviews maritime transport policy regarding liner conference and the changes in the liner market over the decades. Liner shipping industry has long been protected from competition by block exemption. To prevent excessive competition in punctual operation and its inelastic market structure, liner shipping companies formed conferences that are protected to fix the prices under the law. In the US, deregulation in transport sector began from 80's and continuing with OSRA 1998, conferences were dissolving. On the other hand, the EU with close conference system, Regulation 4056/86 contained block exemption remained in force for unlimited time without review clause. However, in Oct 2008, the EU has announced its removal, and conferences were no longer permitted to fix the price nor exchange information. Although OSRA 1998 has already broken up conferences by allowing individual service contracts, but the repeal of the immunity for price fixing will alter significantly the rule on cooperation in the industry since it is a unilateral move by the EU, especially in transatlantic lane. There are rapid changes in shipping market getting much more complicated, and with removal of 4056/86 allowing the market to be more competitive, opening up the industry with far more diverse strategic options. Hence this paper reviews on liner shipping industry and its changes of policies over the years from protected market to open competition market of today.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.3
• /
• pp.63-73
• /
• 2013

The objectives of this study were to develop a hydrologic simulation model to estimate surface drainage for irrigation districts consisting of paddy and protected cultivation, and to evaluate the applicability of the developed model. The model consists of three sub-models; agricultural supply, paddy block drainage, and protected cultivation runoff. The model simulates daily total drainage as the sum of paddy field drainage, irrigation canal drainage, and protected cultivation runoff at the outlets of the irrigation districts. The agricultural supply sub-model was formulated considering crop water requirement for growing seasons and agricultural water management loss. Agricultural supply was calculated for use as input data for the paddy block sub-model. The paddy block drainage sub-model simulates paddy field drainage based on water balance, and irrigation canal drainage as a fraction of agricultural supply. Protected cultivation runoff is calculated based on NRCS (Natural Resources Conservation Service) curve number method. The Idong reservoir irrigation district was selected for surface drainage monitoring and model verification. The parameters of model were calibrated using a trial and error technique, and validated with the measured data from the study site. The model can be a useful tool to estimate surface drainage for irrigated districts consisting of paddy and protected cultivation.