• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.1
• /
• pp.34-41
• /
• 1998

In this paper, I designed a P1394 serial bus chip as new bus interface architecture which can transmit the multimedia data at the rate of 400 Mbps and guarantee necessary bandwidth. because multimedia data become meaningless data after appropriate time, it is necessary to transfer multimedia data in real time, P1394 serial bus chip designed in this paper support isochronous transfer mode to solve this problem. Also, designed P1394 serial bus chip can transfer high quality video data or high quality audio data because it support the speed of 400 Mbps. While user must set device ID manually in previous interface such as SCSI, device ID is automatically determined if user connect each node with designed P1394 serial bus cable and power on. To design this chip, I verified the behavioral of the entrire system and synthesized layout. Also, I did layout the analog blocks and blocks which must be optimized in full custom.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10A
• /
• pp.996-1002
• /
• 2006

USB(Universal Serial Bus) is one of the most popular communication interfaces. When USB is used in an extended range, especially configurating In-home network by connecting multiple digital devices each other, USB interface uses the bandwidth in the way of TDM (Time Division Multiplexing) so that the bottleneck of bus bandwidth can be brought. In this paper, the more effective usage of bus bandwidth to overcome this situation is introduced.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.389-393
• /
• 1987

This paper describes the configuration of serial interconnection BUS, BitBUS, for Energy Management Systems, and it provides low cost, high performance approach in distributed data acquisition and control applications.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1013_1014
• /
• 2009

In this paper, the electrical interfaces used in between COMS satellite bus and Ka-band communication payload are analyzed to verify the robustness of data bus. The purpose of the serial data bus of satellite is to allow serial data transfer between one bus controller or source equipment to several user terminals or slave equipments. A serial data bus in COMS satellite is mainly used for Channel Amplifier and Digital Control Unit of Ka-band Payload.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.533-541
• /
• 2011

The redundant operation of a parallel AC to DC converter via a serial communication bus is presented. The proposed system consists of three isolated CUK power factor correction modules. The controller for each converter is a dsPIC30F6010 microcontroller while a RS485 communication bus and the clock signal are used for synchronizing the data communication. The control strategy of the redundant operation relies on the communication of information among each of the modules, which communicate via a RS485 serial bus. This information is received from the communication checks of the converter module connected to the system to share the load current. Performance evaluations were conducted through experimentation on a three-module parallel-connected prototype, with a 578W load and a -48V dc output voltage. The proposed system has achieved the following: the current sharing is quite good, both the transient response and the steady state. The converter modules can perform the current sharing immediately, when a fault is found in another converter module. In addition, the transient response occurs in the system, and the output voltages are at their minimum overshoot and undershoot. Finally, the proposed system has a relatively simple implementation for the redundant operation.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.535-536
• /
• 2006

In the embedded system, external device interface that operates serial protocol with lower speed than the general computers is used commonly. This paper describes I2C bus protocol that is a bi-directional serial bus with a two-pin interface. The I2C bus requires a minimum amount of hardware to relay status and reliability information concerning the processor subsystem to an external device.

• ETRI Journal
• /
• v.32 no.5
• /
• pp.713-721
• /
• 2010

E-textile technology has earned a great deal of interest in many fields; however, existing wearable network protocols are not optimized for use with conductive yarn. In this paper, some of the basic properties of conductive textiles and requirements on wearable personal area networks (PANs) are reviewed. Then, we present a wearable personal network (WPN), which is a four-layered wearable PAN using bus topology. We have designed the WPN to be a lightweight protocol to work with a variety of microcontrollers. The profile layer is provided to make the application development process easy. The data link layer exchanges frames in a master-slave manner in either the reliable or best-effort mode. The lower part of the data link layer and the physical layer of WPN are made of a fabric serial-bus interface which is capable of measuring bus signal properties and adapting to medium variation. After a formal verification of operation and performances of WPN, we implemented WPN communication modules (WCMs) on small flexible printed circuit boards. In order to demonstrate the behavior of our WPN on a textile, we designed a WPN tutorial shirt prototype using implemented WCMs and conductive yarn.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2499-2502
• /
• 2005

Universal Serial Bus (USB) is one of the most popular communication interfaces. When USB is used in more extended range, especially configuring home network by connecting multiple digital devices each other, USB interface uses the bandwidth in the way of Time Division Multiplexing (TDM) so that the bottleneck of bus bandwidth can be brought under the heavy traffic. In this paper, the more effective usage of bus bandwidth to overcome this situation is introduced. Basically, in order to realize the system for transferring real-time moving picture data among digital information devices, we analyze USB transfer types and descriptors and introduce the method to enhance the detailed performance of isochronous transfer that is one of USB transfer types.

• ETRI Journal
• /
• v.32 no.4
• /
• pp.540-547
• /
• 2010

One of the critical issues in on-chip serial communications is increased power consumption. In general, serial communications tend to dissipate more energy than parallel communications due to bit multiplexing. This paper proposes a low-power bus serialization method. This encodes bus signals prior to serialization so that they are converted into signals that do not greatly increase in transition frequency when serialized. It significantly reduces the frequency by making the best use of word-to-word and bit-by-bit correlations presented in original parallel signals. The method is applied to the revision of an MPEG-4 processor, and the simulation results show that the proposed method surpasses the existing one. In addition, it is cost-effective when implemented as a hardware circuit since its algorithm is very simple.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1332-1347
• /
• 1993

Existing instruments are composed independently according to their function and user constructed instrumentation system with those instruments. But in the late 1980s VXI bus enables to construct instrumentation system with various modular type instruments. For an VXI bus system with the word serial protocol, an increase of data size can degrade the system performance. In this paper shared memory protocol is proposed to overcome performance degradation. The shared memory protocol is analyzed using the GSPN and compared with that of the word serial protocol. It is shown that the shared memory protocol has a better performance than the word serial protocol. The VXI bus message based-system with the proposed shared memory protocol is constructed and experimented with signal generating device and FFT analyzing device. Up to 80 KHz input signal the result of FFT analysis is accurate and that result is agree with that of conventional FFT analyzer. In signal generating experiment from 100 KHz to 1.1 GHz sine wave is generated.