• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.7
• /
• pp.648-653
• /
• 2015

The kinematics with the instantaneous motion and statics of a manipulator has generally been proven algebraically. The algebraic solutions give very simple and straightforward results but the solutions do not have any meaning in physics or geometry. Therefore it is not easy to extend the algebraic results to design or control a robotic manipulator efficiently. Recently, geometrical approach to define the instantaneous motion or static relation of a manipulator is popularly researched and the results have very strong advantages to have a physical insight in the solution. In this paper, the instantaneous motion and static relation of a planar manipulator are described by geometrical approach, specifically by an axis screw and a line screw. The mass center of a triangle with weight and a perpendicular distance between the two screws are useful geometric measures for geometric analysis. This study provides a geometric interpretation of the kinematics and statics of a planar manipulator, and the method can be applied to design or control procedure from the geometric information in the equations.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.6
• /
• pp.9-19
• /
• 1993

This paper presents a new concept of a reconfigurable manipulator system which adjusts its mechanical structure to suit the kinematic characteristics of a given task. A highly redundant manipulator designed as a general purpose manipulator needs to be reconfigured for a specific task. A general task can be decomposed of motion and force components with different control requirements: either gross motion control or fine motion control. Each of these task components are distributed to each part of the manipulator based on the control requirements and the structure of the manipulator. Through the reconfiguration, a redundant manipulator is decomposed into two local arms, and the kinematic characteristics of each local arm is adjusted to suit the assigned task. The reconfigured redundant manipulator has two local arms well-configured for the local tasks and cooperating in serial for a given task. This globally enhances the performance of a redundant manipulator to execute a specific task. The simulation results are shown.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.5
• /
• pp.482-489
• /
• 1997

This paper presents the analysis of the kinematics and dynamics of redundant parallel manipulators, and provides design guides for advanced parallel mainpulators with high performance. Three types of redundancies are considered which include the redundancies in serial chain, joint actuation, and parallelism. First, the kinematic and dynamic models of a redundant parallel manipulator are obtained in both joint and Cartesian spaces, and the kinematic and dynamic manipulabilities are defined for the performance evaluation. The effects of the three types of redundancies on the kinematic and dynamic performance of a parallel manipulator are then analyzed and compared, providing a set of guides for the design of advanced parallel manipulators. Finally, the simulation results using planer parallel manipulators are given.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.929-934
• /
• 2004

As 3D scanner develops, it can be used in measurement. To accomplish complete 3D measurement, the scanner has to view different sides of the target. It can be done by moving the scanner and fix it at every measuring point. By human, it would take so much time. However, by using robot, measuring time can be reduced and the procedure can be automated. It is suitable for 6R serial manipulator to do this kind of work in which the scanner should go any position in arbitrary orientation. We did inverse kinematics analysis by analytical and graphical methods. Then, we compared two methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.104.1-104
• /
• 2002

$\textbullet$ Proper definition of manipulability ellipsoid $\textbullet$ Volume and directional measures of manipulability $\textbullet$ Kinematic modeling as a serial connection $\textbullet$ Configuration dependent singularity $\textbullet$ Effect of nonholonomy on manipulability $\textbullet$ Effect of end-effector positioning on manipulability $\textbullet$ Effect of serial cooperation on manipulability

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.246-250
• /
• 1995

This paper presents a method in analyzing the output force/moments transmission form the applied input forces of the paralled manipulator. Like a serial manipulator the Jacobian matrix introduced in the paper plays role in relating the output forces/monents with the input forces. The force/moment manipulability have been investigated by considering the force transmission and momen transmission independently. Sensitivity analysis has been done and an illuatrating example is given.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.1
• /
• pp.60-68
• /
• 1998

Parallel link manipulators have an ability of more precise positioning than serial open-loop manipulators. However. general parallel link manipulators have been restricted to the real applications since they have limited workspace due to interference among actuators. In this study, we suggest a closed-loop manipulator with 6 degrees-of-freedom and with enlarged workspace. It consists of two parts for minimizing the interference among actuators. One part is lower structure with planar 3 degrees-of-freedom and the other is upper one with spatial 3 degrees-of-freedom. Forward kinematics and inverse kinematics are solved, research about singularity points are carried out and workspace is evaluated. The comparison of workspace between Stewart platform, which is the typical parallel link manipulator, and the suggested manipulator shows that the workspace of the latter is wider than that of the former. Especially, simulation results also show that the suggested manipulator is more suitable when there needs rotation in the end-effector.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.184-191
• /
• 2003

A parallel manipulator has high stiffness and all the joint errors on the device are not accumulated at the end -effector unlike a serial manipulator. These are the reasons why the parallel manipulator has been widely used in many fields of industry. In the parallel manipulator, it is very important to predict the exact pose of the end-effector when we want to control the end-effector motion. Installation errors have to be determined in order to predict and control the actual position and pose of the end-effector. This paper presents an algorithm to find the whole 36 joint error components with joint clearance errors and measurement errors considered, when a link length measurement sensor is used and data more than 36 times are acquired for 36 different configurations. A simulation test using this algorithm is performed with a Matlab program which uses the Levenberg-Marquardt method that is known to be efficient for non-linear optimization.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.12
• /
• pp.56-65
• /
• 1997

This paper presents the robot program for propeller grinding. A robot manipulator is constructed by combining a parallel and a serial mechanism to increase high sitffness as well as workspace. The robot program involves inverse/direct kinematics, velocity mapping, Jacobian, and etc. They are cerived in efficient formulations and implemented in a real time control. A velocity control is used to measure the hight of a propeller blade with a touch probe and a position control is performed to grind the surface of the blade.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.575-581
• /
• 1993

This paper deals with analysis of articulated robot manipulator used for Arc welding and Material handling. Compared with present robot of which weight holding capacity is 6kg, this robot shows wider and symmetric working range for it's serial type mechanism. The link length is determined to have widest working range by using optimal simulation. To reduce body's weight, small AC servo motor is adopted and driving peak torque exerted at each joint is reduced by using dynamic analysis. So it is possible to reduce body's weight by 40% compared with the same class's robot and get wider working range. And by adopting modular design concept, each axis is designed to be changed easily for user's special need and repair.