• 대한전기학회논문지:전력기술부문A
• /
• 제50권3호
• /
• pp.146-152
• /
• 2001

This paper describes an accurate fault location algorithm based on sequence current distribution factors for a double-circuit transmission system. The proposed method uses the voltage and current collected at only the local end of a single-circuit. This method is virtually independent of the fault resistance and the mutual coupling effect caused by the zero-sequence current of the adjacent parallel circuit and insensitive to the variation of source impedance. The fault distance is determined by solving the forth-order KVL(Kirchhoff's Voltage Law) based distance equation. The zero-sequence current of adjacent circuit is estimated by using a zero-sequence current distribution factor and the zero-sequence current of the self-circuit. Thousands of fault simulation by EMTP have proved the accuracy and effectiveness of the proposed algorithm.

• Journal of Welding and Joining
• /
• 제27권2호
• /
• pp.57-62
• /
• 2009

This research was carried out to improve the productivity in the subassembly process of shipbuilding through optimal work planning for the shortest work time. The work time consist of welding time, moving time of gantry, teaching time of robot and robot motion time. The shortest work time is accomplished by even distribution of work and the shortest welding sequence. Even distribution of work was done by appling the simple algorithm. The shortest work sequence was determined by using GA. The optimal work planning decreased the total work time of the subassembly process by 4.1%. The result showed the effectiveness of the suggested simple algorithm for even distribution of work and GA for the shortest welding sequence.

• 한국통신학회논문지
• /
• 제25권1B호
• /
• pp.99-104
• /
• 2000

본 논문은에서는 저작권 보호를 위한 디지털 워터마크 삽입방법에서 워터마크로 많이 사용하는 정규 가우시안 시퀀스를 카오스 시퀀스로 대체하고 그 성능을 비교하여 분석한다. 카오스 시퀀스는 만들기가 쉽고, 초기 치의 변화에 따라 전혀 다른 시퀀스를 만들 수 있다. 본 논문에서 사용한 카오스 시퀀스는 Chebyshev map의 시퀀스 분포를 갖도록 Logistic map을 수정하였다. 실험방법은 원 영상을 웨이브릿 변환하여 카오스 시퀀스와 가우시안 시퀀스로 워터마킹한 후 여러 가지 영상처리와, 반복적인 실험의 결과로 나타난 유사도의 분포를 측정, 비교하였다. DCT-기반 워터마킹 시스템의 결과와 마찬가지로 카오스 시퀀스는 일반적인 신호처리에 있어서 가우시안 시퀀스 못지 않게 강하다. 또한 연속적인 반복 실험에 의한 유사도 편차가 가우시안의 경우보다 작고, 손실 압축에 있어서는 가우시안 시퀀스 보다 좋은 성능을 보였다.

• 충청수학회지
• /
• 제22권1호
• /
• pp.1-5
• /
• 2009

Let {$X_n,\;n{\geq}1}$ be a sequence of independent identically distributed(i.i.d.) sequence of positive random variables with common absolutely continuous distribution function(cdf) F(x) and probability density function(pdf) f(x) and $E(X^2)<{\infty}$. The random variables $\frac{X_i{\cdot}X_j}{(\Sigma^n_{k=1}X_k)^{2}}$ and $\Sigma^n_{k=1}X_k$ are independent for $1{\leq}i if and only if {$X_n,\;n{\geq}1}$ have gamma distribution.

• Journal of the Korean Statistical Society
• /
• 제26권4호
• /
• pp.521-530
• /
• 1997

The new Laplace autoregressive model of order 2-NLAR92) studied by Dewald and Lewis (1985) is extended to the p-th order model-NLAR(p). A necessary and sufficient condition for the existence of an innovation sequence and a stationary ergodic NLAR(p) model is obtained. It is shown that the distribution of the innovation sequence is given by the probabilistic mixture of independent Laplace distributions and a degenrate distribution.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.88-93
• /
• 2008

Weld overlay is one of the residual stress mitigation method which arrest crack. An overlay weld sued in this manner is termed a preemptive weld overlay(PWOL). PWOL was good for distribution of residual stress of dissimilar metal weld(DMW) by previous research. Because range of overlay welding is wide relatively, residual stress distribution on PWR is affected by welding sequence. In order to examine the effect of welding sequence, PWOL was applied to a specific DMW of KORI nuclear power plant by finite element analysis method. As a result, the welding direction that from nozzle to pipe is better good for residual stress distribution on PWR.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권2호
• /
• pp.114-120
• /
• 2003

According to the use of distribution automation systems, the function to find or to search a fault phase is necessary for automatic switches in a distribution substation. In this paper, two algorithms are developed to fine the fault circuit and the fault phase for the automatic switches in substation with ungrounded power system. One is the fault circuit searching method using the zero sequence voltage at the bus and zero sequence current of circuit current and the other is to find the fault phase using the line voltage and zero sequence current. The developed algorithms are tested in the case study simulations. An ungrounded power system is modeled by EMTP as a case study system. The developed algorithms are tested in the case study simulations and each shows correct results.

• Communications for Statistical Applications and Methods
• /
• 제3권2호
• /
• pp.175-185
• /
• 1996

For the Change-point problem in a sequence of binomial variables we consider the maximum likelihood estimator (MLE) of unknown change-point. Its asymptotic distribution is quite limited in the case of binomial variables with different numver of trials at each time point. Hinkley and Hinkley (1970) gives an asymptotic distribution of the MLE for a sequence of Bernoulli random variables. To find the asymptotic distribution a numerical method such as bootstrap can be used. Another concern of our interest in the inference on the change-point and we derive confidence sets based on the liklihood ratio test(LRT). We find approximate confidence sets from the bootstrap distribution and compare the two results through an example.

• Journal of Plant Biotechnology
• /
• 제7권1호
• /
• pp.17-25
• /
• 2005

We have mined each of the five A. thaliana chromosomes for the presence of simple sequence repeats (SSRs) and developed custom perl scripts to examine their distribution and abundance in relation to genomic position, local G/C content and location within and around transcribed sequences. The distribution of repeats and G/C content with respect to genomic regions (exons, UTRs, introns, intergenic regions and proximity to expressed genes) are shown. SSRs show a non-random distribution across the genome and a strong association within and around transcribed sequences, while G/C density is associated specifically with the coding portions of transcribed sequences. SSR motif repeat number shows a high degree of variation for each SSR type and a high degree of motif sequence bias reflecting local genome sequence composition. PCR primers suitable for the amplification of identified SSRs have been designed where possible, and are available for further studies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.62-63
• /
• 2005

Recently, sectionalizing switches have been coming to be operated by remote control through the distribution SCADA system. However, the problem of determining the optimal switching sequence is a combinatorial optimization problem, and is quite difficult to solve, Hence, it is imperative to develop practically applicable solution algorithms create a new arbitral distribution system configuration from an initial configuration, and some of these algorithms do not show a load transfer sequence to reach the objective system.