• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.6
• /
• pp.526-533
• /
• 2015

A new algorithm is proposed for the estimation of equivalent grid impedance at the point of common coupling of a grid-tie inverter output. The estimated impedance parameter can be used for the improvement of the performance and the stability of the distributed generation system. The estimation error is inevitable in the conventional estimation method because of the axis rotation due to PLL. In the conventional estimation error, the d-q voltage and current are used for the calculation of the impedance with active and reactive current injections. Conversely, in the proposed algorithm, the negative sequence current is injected, and then the negative sequence voltage is measured for the impedance estimation. As the positive and negative sequence current controller is independent and the PLL is based on the positive sequence component only, the estimation of the equivalent impedance can be achieved with high accuracy. Simulation and experimental results are compared to validate the proposed algorithm.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.693-698
• /
• 2000

Aspects of classical information theory, such as rate distortion theory, investigate how to encode and decode information from an independently identically distributed source so that the asymptotic distortion rate between the source and its quantized representation is minimized. However, in most natural dynamics, the source state is highly corrupted by disturbances, and the measurement contains the noise. In recent coder-estimator sequence is developed for state estimation problem based on observations transmitted with finite communication capacity constraints. Unlike classical estimation problems where the observation is a continuous process corrupted by additive noises, the condition is that the observations must be coded and transmitted over a digital communication channel with finite capacity. However, coder-estimator sequence does not provide such a quantitative analysis as a variance for estimation error. In this paper, under the assumption that the estimation error is Gaussian distribution, a variance for coder-estimation sequence is proposed and its fitness is evaluated through simulations with a simple example.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1358-1368
• /
• 2012

A tag sequence estimation scheme is to estimate the physical sequence of passive RFID tags that are linearly spread using the movement of a RFID reader. Since RFID readers communicate with the passive tags by very weak radio waves, scanning passive tags are unstable. In this paper, we applied round-trip scanning of a reader to enhance the tag sequence estimation. Proposed scheme first determines the turning point of the reader movement, and then estimates the sequence of the tags using the tag sets scanned in each read cycles. Test experiments show that the proposed scheme can improve the estimation accuracy.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.20-23
• /
• 2003

A reduced-state sequence estimation(RSSE) for trellis-coded (TC) 8PSK/cyclic prefixed single carrier(CPSC) with minimum mean-square error-liner equalization(MMSE-LE) on frequency-selective Rayleigh fading channels is proposed. The Viterbi algorithm (VA) is used to search for the best path through the reduced-state trellis combined equalization and TCM decoding. The symbol error probability of the proposed scheme is confirmed by computer simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.996-1004
• /
• 2004

1-Dimensional Cluster-Based Sequence Equalizer(1-D CBSE) lessens computational load, compared with the classic maximum likelihood sequence estimation(MLSE) equalizers, and has the superiority in the nonlinear channels. In this paper, we proposed an algorithm of searching for optimal training sequence that estimates the cluster centers instead of time-varying multipath fading channel estimation. The proposed equalizer not only resolved the problems in 1-D CBSE but also improved the bandwidth efficiency using the shorten length of taming sequence to improve bandwidth efficiency. In experiments, the superiority of the new method is demonstrated by comparing conventional 1-D CBSE and related analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.8
• /
• pp.467-473
• /
• 2014

In the direct sequence spread spectrum system, the correct synchronization is very important; hence, several acquisition schemes based on the sequential estimation have been developed. Typically, the rapid acquisition sequential estimation (RASE) scheme, the seed accumulating sequential estimation (SASE) scheme, the recursive soft sequential estimation (RSSE) scheme have been developed for the correct acquisition. However, the objective performance comparison and analysis between former estimation schemes have not been performed so far. In this paper, we compare and analyze the performance of the above sequential estimation schemes by simulating the correct chip probability and the mean acquisition time (MAT).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1113-1121
• /
• 2009

In this paper, the channel estimation and pilot sequence design technique of multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems in multi-cell environments are studied for situations in which the inter cell interference (ICI) is the dominant channel impairment. We design pilot sequence aiming at minimizing mean square error and propose the channel estimation technique correspond to the designed pilot sequences. The proposed pilot sequences employ the sequences with good correlation properties such as Chu sequence and through simulations, it is shown that channel estimation algorithm using designed pilot sequence is effective for mitigating the ICI.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.329-332
• /
• 2014

In this letter, the problem of estimating the physical layer (PL) scrambling code sequence of DVB-S2 is studied. We present the first ever scheme to estimate the scrambling sequence. The scheme is based on hypothesis testing. By analyzing the PL scrambling process, we construct a new sequence equivalent to the scrambling sequence. We then use hypothesis testing to estimate the new sequence. The threshold for the hypothesis testing is also discussed. The experiment results show that the performance of our estimation scheme can work even under high BER.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.143-146
• /
• 1998

A new stereoscopic codec. structure using MPEG-2 multiview profile is presented in this paper. In the suggested codec., the left image is coded with motion estimation in the base layerand the right image is coded with disparity estimation in the enhancement layer. Since it is possible to calculate rough motion of the right image sequence with disparity and motion of the left image sequence, motion compensation of the enhancement layer is performed without motion estimation. Since the proposed codec. does not perform motion estimation in the enhancement layer encoding, it is simple and reduces the encoding time. We compared the PSNR of encoded image with three different structured codec., and the experimental results show that suggested codec. has comparable with other codecs.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.3
• /
• pp.90-96
• /
• 1995

A new method for autoregressive parameter estimation from noisy observation sequence is presented. This method, termed the AP method, is a result of an attempt to make use of the adaptive predictor which is a simple and reliable way of parameter estimation. It is shown theoretically that, for noisy input, the parameter vector computed from the prediction sequence is closer to that of the original sequence than the noisy input sequence is, under the spectral distortion criterion. Simulation results with the Kalman filter as a noise reduction filter and real speech data supported the theory. Roughly speaking, the performance of the parameter set obtained by the AP method is better than noisy one but worse than the EM iteration results. When the simplicity is considered, it could provide a useful alternative to more complicated parameter estimation methods in some applications.