• Journal of Advanced Navigation Technology
• /
• v.28 no.4
• /
• pp.480-489
• /
• 2024

The Ministry of Land, Infrastructure and Transport duplicated a section of ATS Route Y579 connecting Jeju and Busan in 2022 to enhance aviation safety and operational efficiency. Before duplication, an offset procedure was applied to separate aircraft flying in opposite direction by deviating them to the right of their intended flight paths. However, on December 1, 2022, this offset procedure was abolished and replaced with two parallel route, Y571(towards Busan) and Y572(towards Jeju), to improve safety and efficiency. The duplication of ATS Routes has significant implications in various aspects. This study analyzes the safety of the newly established ATS Routes and compares their safety with the previously applied offset procedure to evaluate the effectiveness of the duplication. Additionally, it presents the significance from the perspective of airspace operation. A safety assessment has conducted using a modified version of the Reich CRM (collision risk model). The analysis results confirms that the level of safety improves after the duplication and that there were benefits in terms of airspace utilization.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.121-135
• /
• 2012

Soil dispersion and heavy metal leaching with two heavy metal-contaminated soils were studied to derive the optimal dispersion condition in the course of developing the remedial technology using magnetic separation. The dispersion solutions of pyrophosphate, hexametaphosphate, orthophosphate and sodium dodecylsulfate (SDS) at 1 - 200 mM and the pH of solutions was adjusted to be 9 - 12 with NaOH. The clay content of suspension as an indicator of dispersion rate and the heavy metal concentration of the solution were tested at the different pHs and concentrations of the dispersion solution during the experiment. The dispersion rate increased with increasing the pH and dispersion agent concentration of the solution. The dispersion efficiency of the agents showed as follows: pyrophosphate > hexametaphosphate > SDS > orthophosphate. Arsenic leaching was sharply increased at 50 mM of phosphates and 100 mM of SDS. The adsorption of $OH^-$, phosphates and dodecysulfate on the surface of Fe- and Mn-oxides and soil organic matter and the broken edge of clay mineral might decrease the surface charge and might increase the repulsion force among soil particles. The competition between arsenic and $OH^-$, phosphates and dodecylsulfate for the adsorption site of soil particles might induce the arsenic leaching. The dispersion and heavy metal leaching data indicate that pH 11 and 10 mM pyrophosphate is the optimum dispersion solution for maximizing dispersion and minimizing heavy metal leaching.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.1007-1018
• /
• 2009

Hydrocyclone is widely used in industry, because of its simplicity in design, high capacity, low maintenance and operational cost. The separation action of a hydrocyclone treating particulate slurry is a consequence of the swirling flow that produces a centrifugal force on the fluid and suspended particles. In spite of hydrocyclone have many advantage, the application for treatment of urban stormwater case study were rare. We conducted a laboratory scale study on treatable potential of micro particles using hydrocyclone filter (HCF) that was a combined modified hydrocyclone with perlite filter cartridge. Since it was not easy to use actual storm water in the scaled-down hydraulic model investigations, it was necessary to reproduce ranges of particles sizes with synthetic materials. The synthesized storm runoff was made with water and addition of particles; ion exchange resin, road sediment, commercial area manhole sediment, and silica gel particles. Experimental studies have been carried out about the particle separation performance of HCF-open system and HCF-closed system. The principal structural differences of these HCFs are underflow zone structure and vortex finder. HCF was made of acryl resin with 120 mm of diameter hydrocyclone and 250 mm of diameter filter chamber and overall height of 800 mm. To determine the removal efficiency for various influent concentrations of suspended solids (SS) and chemical oxygen demand (COD), tests were performed with different operational conditions. The operated maximum of surface loading rate was about 700 $m^3/m^2$/day for HCF-open system, and 1,200 $m^3/m^2$/day for HCF-closed system. It was found that particle removal efficiency for the HCF-closed system is better than the HCF-open system under same surface loading rate. Results showed that SS removal efficiency with the HCF-closed system improved by about 8~20% compared with HCF-open system. The average removal efficiency difference for HCF-closed system between measurement and CFD particle tracking simulation was about 4%.

• (The)Study of the Eastern Classic
• /
• no.33
• /
• pp.31-56
• /
• 2008

Jang Hyeon-gwang(張顯光, 1554-1637), whose pseudonym or courtesy name is 'Yeoheon(旅軒)', had made a thorough study on the intrinsic nature of Neo-Confucianism in a more sincere fashion, when comparing him with other Neo-Confucianists in Joseon period. Also he was a renowned scholar who expanded its philosophical system in-depth. Yeoheon thereby had strengthened his philosophical system accordant with the Great Learning(大學) and Doctrine of the Mean(中庸), which are the fundamental systems of Neo-Confucianistic education. Based on such considerations, Yeoheon's thought on education can be illuminated from three different perspectives. First, Yeoheon deepened his a theory of good governance by a virtuous ruler(聖人君主論, pronounced, 'Seongingunjuron') as the standard of education. Essentially, his theory pursues Refraining from desire, and preserving the laws of nature(存天理?人欲, pronounced, 'Joncheolliarinnyok'), and put emphasis on ethical awakening, and the governance through a virtue of moral excellence. Second, Yeoheon stressed the learning theories related to 'sincerity' or true heart(誠) and 'piety' or 'respect'(敬)) as the form of education(誠敬, pronounced, 'Seonggyeong'). Also he expounded that people needs "to establish a ground of Respect and Sincerity in their mind." He recognized the differences between the two virtues, meanwhile, however, he understood it as in an identical context. Third, Yeoheon advocated harmony between separation and integration(分合, pronounced, 'Bunhap') as a method for education. Through his unique 'Discourse on Longitude and Latitude', dubbed, 'Li-Gi Gyeongwiseol (理氣經緯說) in which the principle(Li, 理) is equal to the intrinsic energy or material force(Gi, 氣), he maintained his view on the Doctrine of the Mean, in that he was not inclined to either sides according to the logic of Change(易, pronounced 'Yeok'). When reviewing Yeoheon's contemplation in education in the meaning of modern education, he laid the standards for education on the establishment of morality, and he also provides us with an idea which induces us to look through the form and method for education from the perspective of Doctrine of the Mean. In short, Yeoheon's view on education embodies wisdom of traditional Neo-Confucianistic Education having consistency, and it provides for an implication of the review of the importance of the balance in relation to methodological bias toward confusion in the standards for modern education, and unsystematic contents therein.

• Analytical Science and Technology
• /
• v.7 no.1
• /
• pp.33-39
• /
• 1994

The purpose on this study was to develop a new improved chromatographic method for determination of trace phenols from environmental waste water. The research was carried out with selected 8 phenols, and solid-phase extraction was employed as sample pretreatment method. The coupling of XAD-4 and Dowex $1{\times}8$ resin as preconcentration column increased the selectivities toward interferences coexisted in matrix. Automation was accomplished with on-line process of pretreatment and HPLC system. After elution of sample through XAD-4 column, phenols were adsorbed by dispersion force, then displaced from it by ACN basified, simultaneously and selectively readsorbed via anion exchange on Dowex $1{\times}8$. Dowex $1{\times}8$ column was washed by water. Phenols readsorbed were removed from Dowex $1{\times}8$ column by a minimum volumn of methanol containing HCl. Each pretreatment step was connected by switching valves and the eluate was directly on-line injected to obtain fast and reliable results into the HPLC. Recovery of phenols was greater than 90%. To examine utility of this method, analysis of phenols from laboratory waste water sample which was added some organic pollutants to find with phenols on environmental waste water were also accomplished without their interference effects.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.4
• /
• pp.300-309
• /
• 2017

A spacecraft obtains a reaction momentum required for an orbit correction and an attitude control by exhausting a combustion gas through a small thruster in space. If the exhaust plume collides with spacecraft surfaces, it is very important to predict the exhaust plume behavior of the thruster when designing a satellite, because a generated disturbance force/torque, a heat load and a surface contamination can yield a life shortening and a reduction of the spacecraft function. The purpose of the present study is to ensure the core technology required for the spacecraft design by analyzing numerically the exhaust gas behavior of the 10 N class bipropellant thruster for an attitude control of the spacecraft. To do this, calculation results of chemical equilibrium reaction between a MMH for fuel and a NTO for oxidizer, and continuum region of the nozzle inside are implemented as inlet conditions of the DSMC method for the exhaust plume analysis. From these results, it is possible to predict a nonequilibrium expansion such as a species separation and a backflow in the vicinity of the bipropellant thruster nozzle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.771-776
• /
• 2020

In this study, the flexural/shear behavior characteristics of perfobond FRP-concrete composite beams using an FRP plate with perforated webs as formwork and reinforcement are analyzed through an analytical method. Compared with the existing experimental results, we have proved its usefulness and use it in future practice. When the nonlinearity is very large in this case, the nonlinear finite element analysis by an explicit method will be effective. The concrete damage plasticity (CDP) model adopted in this study is considered to be able to adequately simulate the nonlinear behavior of concrete, and the determination of several variable factors required in the model is compared with the experimental results and values used in the study. This recommendation will require review and adjustment for more diverse cases. The effect of the perfobond of the composite beam with perforated web is considered to be somewhat effective in terms of securing the initial stiffness, but in the case of the apex, it is considered that the cross-sectional loss and the effect of improving the bonding force should be properly arranged. The contact problem, such as slipping of the FRP plate and concrete, is considered to be one of the reasons that the initial stiffness is slightly larger than the test result, and the slightly difference from the experimental results is attributed to the separation problem between concrete and FRP after the peak.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.622-628
• /
• 2016

As the suction pad-supporting bike carrier attached to a car may be subject to an excessive dynamic load due to random vibrations and centrifugal forces during driving, its structural safety is of great concern. To examine this, the finite-element method with a fluid-structure interaction should be used because the pressure on the pad bottom is changed in real time according to the fluctuations of the force or the moment applied on the pad. This method, however, has high computing costs in terms of modeling efforts and software expense. Moreover, the accuracy of computation is not easily guaranteed. Therefore, a new method combining the experiment and computation is proposed in this paper: the bottom pressure and contact area of the pad under varying loads was measured in real time and the acquired data are then used in the nonlinear elastic finite-element calculations. The computational and experimental results obtained with the product under development showed that the safety margin of the pad under the axial loading is relatively sufficient, whereas with an excessive rotational loading, the pad is vulnerable to separation or a local surface damage; hence, the safety margin may not be secured. The predicted contact behavior under the variation of the magnitude and type of the loading were in good agreement with the one from the experiment. The proposed analysis method in this study could be used in the design of similar vacuum pad systems.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.4
• /
• pp.288-296
• /
• 2007

Distraction osteogenesis(DO) is a technique of lengthning bone including soft tissue by gradual separation of surgically divided bone surfaces. Distraction osteogenesis combination with a compression stimulation(DO-CO) was a new technique by authors to enhance new bone quality and to shorten the consolidation period. The purpose of this study was to compare DO with DO combined with compression force in efficiency by evaluating the expression of TGF-${\beta}1$, osteonectin and BMP-4 on bone regenerate in rabbit mandible. Fourty two rabbits were used for this experiment. On the control group, the distraction was carried out at the rate of 1 mm per day to obtain the amount of 8 mm distraction for 8 days. On the experimental group, the distraction was carried out at the rate of 1 mm per day for 10 days, 3 days-latency period, and then the compression was carried out as counter direction 1 mm per day for 2 days. After 0 day, 5 days, 13 days, 20 days, 27 days, 34 days and 41 days, three rabbits on each group were sacrificed and the distracted portion of mandible were cut and treated for RT-PCR observation. The level of expression of TGF-${\beta}1$ and osteonectin were shown more and longer expression in the experimental group than in the control group. The expression of BMP-4 was maintained with high level during the entire experimental period in both groups. These findings suggested that DO with compression stimulation could be a favorable technique for obtaining a good new bone quality.

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.252-259
• /
• 2009

This study investigated the effects of ion water and premixed mineral supplementation on the growth performance, carcass, and meat quality parameters in finishing pigs ($LY{\times}D$). Each 20 pigs were randomly allotted to three treatments; CON (basal diet), T1(CON diet added with active water), T2 (T1 diet added with 1.0% premixed mineral). Used ion water and premixed mineral were consisted mainly of Zn and Si, respectively. Daily weight gain feed efficacy were the highest in T2, while fat content was the highest in control (p<0.05) than the others. However, the slaughter qualities including dressing percent, backfat thickness, marbling score, meat color, meat texture, drip loss, meat separation and meat qualities including pH, cooking loss, water holding capacity (WHC), shear force, meat color, backfat color, meat texture were not significantly different (p>0.05) among the treatment groups. Panel test scores of tenderness were the highest in T2 compared to the others.