• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.391-394
• /
• 1999

Until now, there is no report for the relationship between the condition of addressing and the characteristics of surface discharge in ac-PDP. We have known that such these experiment was important to drive ac PDP Therefore, this paper deals with the probability of transfer and the character of luminance according to addressing voltage(Va) and blocking voltage(Vg) in addressing period and sustain voltage in sustaining period and we use waveform according to ADS(Address and Display period Separation) method

• Analytical Science and Technology
• /
• v.16 no.1
• /
• pp.78-81
• /
• 2003

Peptides separation in high performance liquid chromatography (HPLC) is very important for the analysis of total proteins using mass spectrometry rather than two-dimensional polyacrylamide gel electrophoresis (2D-PAGE). In this study, we investigated the optimal HPLC condition of peptides for the use of mass fingerprinting. As a result of pursuing a combination of solvent additives for HPLC, water and acetonitile containing both 0.1% trifluoroacetic acid and 0.1% acetic acid respectively showed the most efficient resolution and sensitivity.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.6 s.111
• /
• pp.634-642
• /
• 2006

For the analysis of dynamic contact between a catenary and a pantograph of high-speed electrical train, the numerical solution of the equations of motion of the vehicle pantograph and the catenary system subjected to the contact condition is obtained. The whole equations of motion of the catenary and the pantograph are simultaneously time integrated with the strict application of the contact condition. For the stability of the numerical solution, with the cubic spline interpolation of the catenary displacement, the velocity and acceleration constraints as well as the displacement constraint are imposed on the contact point. Especially it is shown that the Coriolis and centripetal accelerations are critical for the accuracy and stability of the computation.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.95-102
• /
• 2019

Non-destructive methods such as rebound hardness method and ultrasonic method are widely studied for evaluating the physical properties, condition and damage of concrete, but are not suitable for detecting delamination and cracks near the surface due to various constraints of the site as well as the accuracy. Therefore, in this study, the impact resonance method was applied to detect the separation cracks occurring near the surface of the concrete slab and bridge deck. As a next step, the principal component analysis were performed by extracting various features using the FFT data. As a result of principal component analysis, it was analyzed that the reliability was high in distinguishing defects in concrete. This feature extraction and application of principal component analysis can be used as basic data for future use of machine learning technique for the better accuracy.

• Journal of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.47-53
• /
• 1984

The separation of the rare earth elements with diethylene triamine N, N, N', N', N"-pentaacetic acid (DTPA) as eluent was carried out at different pH and concentrations by using anion exchange resin column. The rare earth elements were absorbed on the upper of the resin column and the best condition of the separation behavior was 0.025M of DTPA at pH 8.35. The elution order of the rare earths was in the order of the atomic number of the rare earth elements except samarium. The resolution of adjacent rare earth elements that have been separated with 0.025M-DTPA as eluent, was from 3.03 to 1.25 at pH 8.35. Resolution of Ce-Pr was maximum value in 3.03 and Eu-Gd was minimum in 1.25 at condition mentioned above, respectively. The resolution of rare earth elements separated with 0.025M DTPA eluent was very good at pH range of 8.0~8.6.

• Journal of Environmental Health Sciences
• /
• v.29 no.1
• /
• pp.51-61
• /
• 2003

Pollution purification using titanium dioxide (TiO$_2$) photocatalyst has attracted a great deal of attention with increasing number of relent environmental problems. Currently, the application of TiO$_2$ photocatalyst has been focused on purification and treatment of waste water. However. the use of conventional TiO$_2$ powder photocatalyst results in disadvantage of stirring during the reaction and of separation after the reaction. And the usage of artificial UV lamp has made the cost of photocatalyst treatment system high. Consequently, we herein studied the pilot-scale design to aid in optimization of the energy-saving process for more through development and reactor design by solar light/UV lamp/ TiO$_2$system. In this study, we manufactured the TiO$_2$sol by sol-gel method. According to analysis by XRD, SEM and TEM, characterization of TiO$_2$ sol were nano-size (5-6 nm) and anatase type. Inorganic binder (SiO$_2$) was added to TiO$_2$ lot to be coated for support strongly, and support of ceramic bead was used to lower separation rate that of glass bead The influences were studied of various experimental parameters such as TiO$_2$ quantity, pH, flow rate. additives, pollutants concentration, climate condition and reflection plate by means of reaction time of the main chararteristics of the obtained materials. In water treatment system, variable realtor as solar light/ or UV lamp according to climate condition such as sunny and cloudy days treated the phenol and E-coli(Escherichia coli) effectively.

• KSBB Journal
• /
• v.16 no.6
• /
• pp.533-537
• /
• 2001

${\alpha}$-lactalbumin and ${\beta}$-lactoglobulin in whey proteins were separated by high performance membrane chromatography (HPMC). The separation mechanism involved anion-exchange, and the stationary phase was anion CIM (Convective Interaction Media) DEAE, QA disk and cation exchanger SO$_3$(16${\times}$3 mm). Two types of mobile phase were used, buffer A (20 mM Tris-HCI, pH 7.3) and buffer B(buffer A + 1 M NaCl), As the amount of NaCl dissolved in buffer linearly increased, which enabled a gradient elution mode. The optimum mobile phase and operating condition (Buffer A/Buffer B = 100/0 - 30/70 vol%, gradient time 1 min, 30/70 - 10/90 vol.%, gradient time 2 min) were experimentally determined. In this experimental condition, ${\alpha}$-lacta1bumin, ${\beta}$-lactoglobulin were separated within 5 min at a mobile phase flow rate of 4 mL/min.

• Nuclear Engineering and Technology
• /
• v.41 no.3
• /
• pp.319-326
• /
• 2009

This study was carried out to investigate the high-acidity co-separation of Am and RE from a simulated radwaste solution by a solvent extraction using a mixture of Dimethyldibutyltetradecylmalonamide (DMDBTDMA, as an extractant) and dihexyl octanamide (DHOA, as a phase modifier) diluted with n-dodecane (NDD). All the experiments were conducted as a batch type. First, the environmentally friendly DMDBTDMA and DHOA composed of only CHON atoms were self-synthesized. Then, the conditions for the prevention of a third phase, generated in the organic phase were examined. In addition, the effects of the concentration of nitric acid, DHOA, oxalic acid and $H_2O_2$ on the co-extraction of Am and RE were elucidated. Consequently, the optimum condition of (0.5M DMDBTDMA+0.5M DHOA)/NDD-0.3M $C_2H_2O_4-4.5M$ $HNO_3$ and O/A=2 was obtained through experimental work. Under this condition, the extraction yields were found to be about 80% for Am, more than 70% for RE such as La, Eu, Nd, Ce, etc., 3% for Cs and Sr, 69% for Fe and less than 11% for Mo and Ru. For the co-extraction of Am and RE, Fe should be removed in advance or prevented from a co-extraction with Am by controlling the different extraction rates of Am and Fe. About 95% of the Am and RE in the organic phase were stripped using a 0.5M $HNO_3$.

• Membrane Journal
• /
• v.15 no.4
• /
• pp.349-354
• /
• 2005

YSZ (yttria-stabilized zirconia) determined with an electrolyte that analyzed thermal stability along sintering condition and an electric characteristic. As sintering temperature increases by SEM, grain grows and it showed that pore decreases relatively. and confirmed effect by grain size. It evaluated that particle internal resistance and electric performance by resistance in an electrolyte and electricity conductivity measurement through ac impedance measurement in temperature of $800\~1000^{\circ}C$ in 2-probe method In order to recognize an electric characteristic. In dry process and wet process, density was each 6.13, 6.25 $g/cm^3$ and the relative density was each 98, 99$\%$ when sintering condition is $1400^{\circ}C$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1025-1031
• /
• 2012

The present paper deals with concept design of supersonic inlet based on compressible flow theory and flow control of bleeding in order to guarantee stability of supersonic inlet of ramjet engine in broad range of operating conditions. Shock instability, shock wave-boundary layer interaction and flow separation should be properly controlled to improve performance of the supersonic inlet. Considering shock strength, boundary layer and flow separation, the supersonic inlet is modified from the basic model which is designed under inviscid theory. Consequently, shock is stabilized, and required mass flow rate is obtained. Furthermore, bleeding is applied to the supersonic inlet to maintain performance in off-design conditions. Mass flow condition is adopted for modeling of bleeding effect, and performance of the supersonic inlet is evaluated by changing bleeding locations and numbers.