• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.129-138
• /
• 2006

After Seoul has introduced semi-public bus management system(public management-private operation), the Seoul Metro Government needs a scientific management tool for optimal scheduling for bus routes, to reduce unnecessary operations and provide demand responsive service. As a product of this effort, this paper proposes a heuristic model that could minimize total passenger waiting time under the constraints, such as number of vehicles, working conditions, max load point, minimax headway. etc. For verifying the validity of the proposed model, it is applied to an existing bus route. It results that headways in rush hours become decreased and the passenger waiting time could be decreased. In conclusion. it is thought that the Proposed model contributes to efficiency of bus operation.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.4
• /
• pp.542-553
• /
• 2018

Since many previous studies reported the health effect of air pollution and indicated traffic as a major pollution source, significant policy efforts have been made to control traffic to reduce air pollution. However, there have been few studies that evaluated such policy implementation. In Seoul, Korea, the exclusive median bus lane system was implemented in 2004, and the metropolitan government applied air pollution reduction policies such as conversion of diesel buses to compressed natural gas buses and installation of emission control devices. This paper aimed to investigate the impact of the exclusive median bus lane system on air pollution reduction. Using hourly concentrations of particulate matter ($PM_{10}$) and nitrogen dioxide ($NO_2$) measured at 131 regulatory monitoring sites in Seoul and Gyeonggi-do for 2001-2014, we calculated annual and daily average concentrations at each site. We assessed the impact of the policy using differences-in-differences analysis by annual and daily average models after adjusting for geographic and/or meteorological variables. This method divides population into treatment and control groups with and without policy application, and compares the difference between the two time periods before and after the policy implementation in the treatment group with the difference in the control group. We classified all monitoring sites into treatment and control groups using two definitions: 1) Seoul vs. Gyeonggi-do; 2) within vs. outside 300 meters from the median bus lane. Pre- and post-policy periods were defined as 2001-2005 and 2006-2014, and 2004 and 2014 in the annual and daily models, respectively. The decrease in $PM_{10}$ concentrations between the two periods across monitoring sites in the treatment group was larger by $1.73-5.88{\mu}g/m^3$ than in the control group. $NO_2$ also showed the decrease without statistical significance. Our findings suggest that an efficient public transport policy combined with pollution abatement policies can contribute to reduction in air pollution.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.201-204
• /
• 1992

In the conventional load flow technique, it is assumed that the generator at the slack bus is used to supply the transmission losses and the change of power due to the generator outage. The assumption is not true in physical sense. This paper presents a new load flow technique that considers the governor-frequency characteristics and load-frequency characteristics and the technique is consistent with the actual power system phenomenon. This paper proposes an efficient methodology using sensitivity with the new technique for contingency analysis, which is used to calculate the line flows. Computational results of this technique applied to IEEE 14-bus system are presented.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.541-547
• /
• 2015

In this study, the performance of a low-floor midsize bus under development is predicted through simulations. To predict the vehicle's acceleration, maximum speed, and uphill driving performance, a forward simulator which calculates the vehicle power is developed. Also we verify the forward simulator by comparing simulations and test result for benchmarking vehicle. To predict the fuel consumption, we use a backward simulator for a specified road cycle. However, to predict the fuel consumption using the backward simulation the engine fuel-consumption map is needed. The engine fuel-consumption map extracting data from a similar sized diesel engine is used by re-scaling the maximum torque. As a result, we simulate the vehicle's forward performance with a new engine. Further, we simulated the backward performance to optimize the fuel efficiency and gearshift timing.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.1-11
• /
• 2008

As bus is realized by economical, environmental transportation that is available mass transport than car, various policy for improvement of services is achieved. As innovative public transportation systems like BMS (Bus Management System) have established, it is possible to manage bus service efficiently. However, the present bus service management system mainly focuses on enhancing service reliability represented by schedule adherence index. This study discusses the necessity of a special management for bus bunching phenomena at stops, and develops two kinds of bus bunching indices based on the Number of Berth and the Average Bus Arrival Rate. The bus bunching indices were measured by utilizing the bus operational information from BMS at the Seoul TOPIS(Transportation & Information Service). In order to evaluate the sensitivity of the Indices, the indices were applied to two different bus groups: buses on exclusive bus median lane, and regular (shared) lanes. As analysis result, is bunching as is near in downtown and is bunching to peak time morning than the afternoon. Compared with the schedule adherence index, the suggested indices were proved as an efficient complementary indices in the evaluation of the bus operational performance. The results of index comparison between exclusive bus median lane and shared lanes can promote the expansion of exclusive bus median lane. Moreover, it can also be used as a reference in deciding bus station scale including the Number of Berth and the route adjustment plan.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.75-83
• /
• 2004

July 1, 2004 Seoul Metropolitan city is operating the Median Bus Lane System on Gangnam Main Street, Seongsan-Susaek-ro (Road) and Dobong- Mia-ro (Road) as one of the systematic reorganizations in public transportation. It has been assumed that there was an improvement in the speed of bus considering that the Median Bus Lane System practiced on Cheonho-daero (Main Street) since 1996 have had 35km/h on the average. If the Median Bus Lane goes into effect, there is a problem with the left turn on the crossroad. The buses go on the existing first lane so that the left fuming cars cannot help but turn left on the second lane. In case that the Median Bus Lane is put into practice, the left turn on the crossroad should not be allowed. However, if the left turn is not permitted on the crossroads in the aforementioned main streets, neighboring residents will complain about it and there will be some difficulties in finding other detour. On the premise that the prevalent left turn on the crossroads is allowed while the Median Bus Lane is being put into practice, this study suggests the separation of a stop line between buses and other vehicles as a way of fuming left in a safe manner and a way to calculate the appropriate distance.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.609-611
• /
• 1998

In this paper, a method for the efficient implementation of the control network for a distributed control system (DCS) is proposed. The proposed method focuses on the real-time property and the low networking cost of a control network. It suggests a new network architecture combining the IEEE 802.4 token-passing bus access method and the IEEE 802.3 physical layer. For this purpose, a new interface, a physical layer service translator is introduced. A control network using this method is implemented and applied to a DCS.

• Design Convergence Study
• /
• v.13 no.5
• /
• pp.131-145
• /
• 2014

Considering the number of population commuting from Gyeonggi to Seoul, the development of the bus system is relatively slow. There are many problems to be solved but it has been overlooked, leaving the users in discomfort. The goal of this research is to improve the current system to satisfy the unmet needs, using HCI methods, which is composed of five steps, including Define, Find, Analyze & Synthesize, Ideation, Develop. In Define, we recruited the interviewees using the extreme user method to find their needs. In Find, we proceeded 'be the customer', shadowing for background research and in-depth interview. In Analyze & Synthesis, we analyzed the customer needs and clustered to similar needs to draw useful ideas. After that we suggested sophisticated ideas based on design principles from previous stage and visualized in user scenarios and mock-ups. Overall, the research suggests with text message service, informative light service and mobile application to improve the existing bus station.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.1
• /
• pp.41-46
• /
• 2014

Bus service is easily adjusted to accommodate the changed demand. Despite the flexibility of that, its relocation should overcome the following problems: first, Bus line rearrangement should consider the balance between the demand and the supply to enhance the transit equity among the users scattered around the area that supply against demand imbalances. Second, the existing demand analysed is to crude since the demand was analysed based on TAZ. mainly based on the Dong unit. Utilization of the GWR and GIS-T data can resolve the problem. In this paper, the limitation of the conventional transit demand analysis model is overcome by deploying the GWR model which identifies the transit demand based on the geographic relation between the service location and those of the users. GWR model considers the spatial effect of the bus demand in accordance with the distance to the each bus stops using SCD(Smart Card Data) and BIS(Bus Information System). This demand map was then superimposes with the existing bus route which identified the areas where the balance between demand and supply is severly skewed. since the analysis was computed with SCD and BIS at every bus stops. the shortage and surplus of bus service of entire study area could computed. Further. based on this computational result and considering the entire bus service capacity data. Bus routes optimization from the oversupplied areas to the undersupplied area was illustrated thus this study clearly compared the benefits the GIS.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10a
• /
• pp.259-260
• /
• 2007