• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.643-649
• /
• 2007

Lipase-catalyzed esterification of structural butanol isomers and n-butyric acid was investigated in supercritical carbon dioxide. The experiments were performed in a high pressure cell for 5 hrs with a stirring rate of 150 rpm at 323.15 K and 130 bar. The Candida Antarctica lipase B (CALB) was used in whole system as a catalyst. The experimental results were analyzed by GC-FID using a INNOWax capillary column. The conversion yield and the tendency of the esterification in supercritical carbon dioxide were compared with estimated results by molecular dynamics simulation. Based on the Ping-Pong Bi-Bi mechanism with competitive inhibition, each step of the reaction was optimized; using this result the transition state was predicted. Conformational preference of isomers was also analyzed using molecular dynamics simulations. This kind of approach will be further extended to the prediction of enzyme-catalyzed reactions using computers.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.2
• /
• pp.111-118
• /
• 2016

This paper presents an X-band (9.375 GHz) $1{\times}2$ array microstrip antenna which is capable of active beam compensation for installation of an unmanned aerial vehicle (UAV). First of all, a basic $1{\times}2$ array microstrip antenna incorporated with wilkinson power divider was designed and performance of the array antenna was verified. Next, to verify beam steering performance of the designed array microstrip antenna, we fabricated a phase shifter, and the wilkinson power divider as module structure and measured characteristics of beam steering according to phase shifting. The main lobe is 0.6 dBi at $0^{\circ}$, and the side lobe decreased 18.8 dB. The reliable radiation pattern was achieved. Finally, an active beam steering microstrip array antenna attached with the phase shifter and the power divider on the back side of the antenna was designed and fabricated to install wing of UAV for compactness. The maximum gain is 0.1 dBi. Therefore, we obtained a basic antenna technology for compensating beam error according to wing deformation of an UAV installed array antennas.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2998-3006
• /
• 2011

This paper is about the relations between the electric multiple unit and ESS(Energy Storage system, here after) applying bi-direction Buck-Boost Converter. ESS may be possible to suppress the line voltage drops and the power loading fluctuations and to save the regeneration power lapses. This paper confirm for simulation that ESS reusing regenerative power generated during braking in train. Also, presents the influence of regenerative power variation of train and catenary acceptability for energy saving obtained by applying the ESS to Daejeon Metro line 1.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.233-239
• /
• 2016

NASA(미국 항공우주청)를 중심으로 무인항공기교통관리(UTM) 체계를 이용한 드론 항공교통통제 모의시험을 진행하고 있다. 국내에서도 2017년부터 안전한 무인항공기교통관리(UTM) 체계 구축을 위한 '저고도 무인기 감시관리 기술 개발 및 시스템 시범 운용사업'을 진행할 예정이다. 본 논문은 지상도로망을 버드뷰(Birdview)처럼 내려다보며 비행할 수 있는 저고도 드론이 안전하고 효율적인 운항을 보장하기 위해서는, 상공에 장애물이 없는 지상도로망의 상공에 가상도로망과 가상신호체계를 확장시킨 한국형 가상 'SKYWAY' 항법 및 관제 체계(${\mu}$ATM)에 관한 기획 연구에 관한 것이다.

• Annual Conference on Human and Language Technology
• /
• 2018.10a
• /
• pp.574-579
• /
• 2018

본 논문에서는 한국어 형태소 분석 시스템을 제안하는데, 연구 목표는 오타 없는 문서를 대상으로 한 경우에도 높은 성능을 유지하면서, 동시에 오타가 있는 문서에서도 우수한 성능을 산출하는 것이다. 실험은 크게 두 종류로 나누어서 진행된다. 주 실험인 첫 번째 실험에서는, 자모 임베딩과 음절 임베딩을 결합(concatenate)한 벡터를 입력으로 Bidirectional LSTM CRFs을 수행함으로써, 세종말뭉치 대상으로 어절 정확도 97%, 그리고 1, 2, 5 어절마다 오타가 출현한 경우에서도 각각 80.09%, 87.53%, 92.49%의 높은 성능을 산출하였다. 추가 실험인 두 번째 실험에서는, 실생활에서 자주 발생하는 오타들을 집계하여 그 중에서 11가지 오타 유형을 선정 후, 각 유형에 대해 변환된 임베딩 벡터를 적용함으로써, 해당 오타를 포함한 문장에서 93.05%의 우수한 성능을 산출하였다.

• 대한근관절건강학회:학술대회논문집
• /
• 2001.11a
• /
• pp.357-364
• /
• 2001

• Journal of Family Resource Management and Policy Review
• /
• v.19 no.1
• /
• pp.111-138
• /
• 2015

The purpose of this study was to understand the lived experiences of grandmothers and family in transition. Grandmothers in transition means grandmothers who had married children at least one even if there are no grandchildren yet. The data for this study came from 20 grandmothers in transition of 5 focus group(each 4 persons) interview. 9 of them was pre-grandmother without grandchildren yet, 11 was grandmother who had grandchildren. The result of this study revealed that the meaning of grandmotherhood. Dynamics of family in transition around supporting child care represent change of family relations. It didn't means 'empty-nest' model of foreign theory. The Absolute quantity of intergeneral exchange and conflict extended as three generational families.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.2
• /
• pp.86-91
• /
• 2011

In the underwater communications, the acoustic channel is in poor communication conditions, such as long propagation delay, narrow bandwidth, and high bit-error rate. For these bad acoustic channels, we propose an efficient automatic repeat request (ARQ) for multi-hop underwater network by using the concepts of concurrent bi-directional transmission, multiple sub-packets, and overhearing data packet instead of the acknowledgement signal. Our results show that the proposed ARQ significantly reduces the transmission latency especially in high BER compared with the existing Stop and Wait ARQ.

• Journal of the Korean Society of Radiology
• /
• v.82 no.4
• /
• pp.889-902
• /
• 2021

Purpose To assess the diagnostic performance of contrast-enhanced ultrasound (CEUS) for additional MR-detected enhancing lesions and to determine whether or not kinetic pattern results comparable to dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) of the breast can be obtained using the quantitative analysis of CEUS. Materials and Methods In this single-center prospective study, a total of 71 additional MR-detected breast lesions were included. CEUS examination was performed, and lesions were categorized according to the Breast Imaging-Reporting and Data System (BI-RADS). The sensitivity, specificity, and diagnostic accuracy of CEUS were calculated by comparing the BI-RADS category to the final pathology results. The degree of agreement between CEUS and DCE-MRI kinetic patterns was evaluated using weighted kappa. Results On CEUS, 46 lesions were assigned as BI-RADS category 4B, 4C, or 5, while 25 lesions category 3 or 4A. The diagnostic performance of CEUS for enhancing lesions on DCE-MRI was excellent, with 84.9% sensitivity, 94.4% specificity, and 97.8% positive predictive value. A total of 57/71 (80%) lesions had correlating kinetic patterns and showed good agreement (weighted kappa = 0.66) between CEUS and DCE-MRI. Benign lesions showed excellent agreement (weighted kappa = 0.84), and invasive ductal carcinoma (IDC) showed good agreement (weighted kappa = 0.69). Conclusion The diagnostic performance of CEUS for additional MR-detected breast lesions was excellent. Accurate kinetic pattern assessment, fairly comparable to DCE-MRI, can be obtained for benign and IDC lesions using CEUS.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.88-94
• /
• 2002

Recently, the life cycle and the lead-time of a product are to be shortened in order to satisfy consumer's demand. It is thus important to reduce the time and cost in manufacturing trial products. Several technique have been developed and successfully commercialized in the market of RPM(Rapid Prototyping and Manufacturing). However, most commercial systems currently use resins or waxes as the raw materials. So, the limited mechanical strength for functional testing is regarded as an obstacle towards broader application of rapid prototyping techniques. To overcome these problems, high-speed machining technology is being investigated worldwide for rapid manufacturing and even for direct rapid tooling application. In this paper, some fundamental experiments and analyses are carried out to obtain the filling time, materials, method, and process parameters for HisRP(High-Speed RP) process. HisRP is a new RP process that is combined high-speed machining with automatic filling. In filling process, Bi58-Sn alloy is chosen as filling material because of the properties of low-melting point, low coefficient of thermal expansion and no harm to environment. Also the use of filling wire it if advantage since it needs simple and flexible mechanism. Then the rapid product, for example a skull, is manufactured for aluminum material by HisRP process with an automatic set-up device thor 4-faces machining.