• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.129-135
• /
• 2015

This paper shows significant methods that improve the lifespan of LED modules as well as efficiently using an aluminum heat-sink for LED module in high power. It proposes a method that raises stability and lifespan to protect LED modules and the power unit when the LED module has been used for a long hours at high temperatures. During the research, we applied a method of pulse-width modulation (PWM) in order to prevent the phenomenon that the entire power of a system is turned off and the lifespan is reduced when the LED nodule reacts to the high temperatures. To protect the LED module and SMPS based on high efficiency, a temperature sensor is attached underneath the circuit board and the sensor measures the temperature of circuit board when the LED module is powered on. The electrical power connected to SMPS is controlled by PWM when the temperature of the LED module reaches a particular temperature.

• 센서학회지
• /
• 제26권5호
• /
• pp.301-305
• /
• 2017

This paper presents a wearable human health-monitoring band. The band consists of a body temperature detector (BTD) and a hear rate detector (HRD). The BTD and HRD are realized using an inkjet-printed flexible temperature sensor and a commercial heart rate sensor module, respectively. The sensitivity of the fabricated BTD was found to be $-31/^{\circ}C$ with a linearity of 99.82%. The HRD using the commercial heart rate sensor module has a good performance with a standard deviation of 0.85 between the data of a commercial smart watch and the fabricated HRD.

• 센서학회지
• /
• 제24권5호
• /
• pp.299-305
• /
• 2015

Since the natural disasters such as floods, droughts, heat wave and cold wave are increasing, the need for risk management is necessary to minimize the damage with utilizing IT technology. Also, the monitoring services of disaster response type have been developed and applied. Recently, the open source hardware based on the signal of the sensor, or the monitoring studies have been carried. In this paper, by analyzing a low-cost open source hardware platform such as Beagle board, we examine the utilization of the hardware-based module for sensor monitoring.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.827-830
• /
• 2011

본 논문에서는 풍향 풍속 계측모듈 및 DSP 센서인터페이스 회로시스템을 제안한다. 이 DSP 시스템은 풍향 풍속모듈, 대기압센서, 대기 온도 센서의 정보를 받아들이고, 빠르게 처리하여 PC 모니터링 시스템에 전달한다. 특히 풍향 풍속 모듈과 DSP 하드웨어는 직접 설계하여 적용한다. 풍향 풍속 모듈은 바람에 관한 벡터적 정보를 얻기 위해 4개의 박막형 RTD(Resistive Temperature Detectors) 또는 박박형 피에조센서를 원기둥 모양의 지지표면에 벡터적으로 배치하는 구조를 채택한다. 이 구조를 채택한 계측 모듈은 진동, 습기, 부식 등에 강인하면서 정확한 계측을 가능케 한다. 센서 신호처리 회로는 TI 사의 고속 DSP인 TMS320F2812 를 사용한다.

• 한국전자통신학회논문지
• /
• 제16권4호
• /
• pp.709-718
• /
• 2021

본 논문에서 유기동물 발생 통계를 통해 유기견이 매년 증가함을 알 수있다. 유기견의 발생 건수를 줄이는 것을 목표로 ESP32 모듈과 GPS센서를 이용해 실시간 위치추적 시스템을 기반으로 스마트 애완견 어깨줄을 구현하였다. 블루투스 모듈이 내장된 ESP32모듈로 각종센서를 이용해 MCU로 입력시켜 최종적으로 스마트폰 어플로 출력하여, 내장 블루투스 모듈을 통해 통신한다. 추가적으로 네오픽셀을 이용해 야간에 취약한 점을 LED 발광을 통해 보완하고, 경고거리를 설정해 자동으로 LED 점멸효과와 MP3모듈을 통한 음악재생 시스템을 설계한다. 또한 자이로센서를 통해 활동량 측정해 애완견의 헬스케어에도 도움을 줄 수 있는 스마트 애완견 어깨줄을 설계하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.413-416
• /
• 1998

Sensitivity and calibration considerations are most important in the design and implementation of real control systems. Ideally parameter changes due to various causes should not appreciably affect the system's performances. But all the values of physical components of the plants and controllers as well as the relevant environmental conditions change in time, thus the output performance can be deteriorated during the operating span of the system. Naturally the duty of calibration or the prevention of performance deterioration due to excessive component sensitivity should be provided to the control system. In this paper, we propose a digital controller which has the capability of calibration and gain adjustment as well as the execution of control law. Specifically the problems of gain adjustment and offset calibration in the light source and CdS sensor module for position measurement in a flexible link system are considerably resolved. The parameters of measurement module are prone to change due to environmental brightness conditions resulting in poor steady state performance of the overall control system. Thus a proper method is necessary to provide correction to the changed values of gain and offset in the position measurement module. The proposed controller, whenever necessary, measures the open-loop characteristics, andthen calculates the offset and sensor gain correction values based on the prepared standard measurements. It is applied to the control of a flexible link system with the gain and offset calibration porblems in the light sensor module for position to show the applicability.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권3호
• /
• pp.45-50
• /
• 2005

This paper proposed an efficient manufacturing system using the OMM (on-machine measurement) system. The OMM system is software-based 3D modeler for inspection on machine, and it is interfaced with machine tools via RS232C. The software is composed of two inspection modules; one is touch probe operating module, and the other is laser displacement sensor operating module. The module for touch probe needs the inspection feature extracted from CAD data. The touch probe moves to workpiece by three operating modes as follows: manual, general and automatic mode. The operating module of the laser displacement sensor is used to inspect profiles and very small holes. An advantage of this inspection method is the ability to execute on-line inspection during machining or afterward. The efficiency of proposed system which can predict and define the machining errors of each process was verified, so the developed system was applied to inspect a mold-base (cavity, core).

• Current Photovoltaic Research
• /
• 제9권3호
• /
• pp.106-109
• /
• 2021

In order to perform photovoltaic (PV) operation and management (O&M) efficiently, individual PV module monitoring is becoming more important. In this research, we developed wireless IoT sensor which can monitor individual photovoltaic modules. This IoT sensor can detect the output voltage, current and module temperature of individual modules and provide monitored data by wireless communication. Measured voltage error was 1.23%, and it shows 16.6 dBM, 0.42sec and 7.1 mA for voltage, transmittance output, response time and mean power consumption, respectively. IoT sensors were demonstrated in the test field with real climate environment condition and each of 5 sensors showed precise results of voltage, current and temperature. Also, sensors were compared with commercial power-optimizers and showed result difference within 5%.

• 로봇학회논문지
• /
• 제16권4호
• /
• pp.306-312
• /
• 2021

This paper describes localization of autonomous underwater vehicles(AUV), which can be used when some navigation sensor data are an outlier. In that situation, localization through existing navigation algorithms causes problems in long-range localization. Even if an outlier sensor data occurs once, problems of localization will continue. Also, if outlier sensor data is related to azimuth (direction of AUV), it causes bigger problems. Therefore, a parallel localization module, in which different algorithms are performed in a normal and abnormal situation should be designed. Before designing a parallel localization module, it is necessary to study an effective method in the abnormal situation. So, we propose a localization method through machine learning. For this method, a learning model consists of only Fully-Connected and trains through randomly contaminated real sea data. The ground truth of training is displacement between subsequent GPS data. As a result, average error in localization through the learning model is 0.4 times smaller than the average error in localization through the existing navigation algorithm. Through this result, we conclude that it is suitable for a component of the parallel localization module.

• 정보처리학회논문지C
• /
• 제12C권6호
• /
• pp.865-874
• /
• 2005

컴퓨터 시스템에 저장된 정보는 불법적인 접근, 악의적인 파괴 및 변경, 우연적인 불일치 등으로부터 보호되어야 한다. 본 논문에서는 이러한 공격을 탐지하고 방어할 수 있는 센서기반 침입탐지시스템을 제안한다. 제안된 시스템은 각 중요 디렉터리에 센서 파일을 각 중요 파일에 센서 데이터를 설치한다. 이들 센서 객체는 일종의 덫으로서, 센서 객체에 대한 접근은 침입이라고 간주된다. 이를 통해 불법적으로 정보를 복사하거나 빼내 가려는 가로채기 위협을 효과적으로 방어할 수 있다. 제안된 시스템은 리눅스 시스템 상에서 적재 가능한 커널 모듈(LKM: Loadable Kernel Module) 방식을 사용하여 구현되었다. 본 시스템은 폭 넓은 침입탐지를 위해 호스트 기반의 탐지 기법과 네트워크 기반의 탐지 기법을 서로 결합함으로써 잘 알려지지 않은 가로재기 공격도 탐지 가능하게 하였다.