• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1532-1535
• /
• 2009

This paper describes a K-band CW radar transceiver suitable for power saving motion sensor. The presented transceiver module is designed and contains patch antennas, dielectric resonator oscillator (DRO), IF amplifier, mixer, divider. The designed divider and antenna are measured and the transmitting frequency and the power were fairly good for using in commercial applications. The transceiver is manufactured with a dimension of 35${\times}$35${\times}$10(mm) and can be adapted in various applications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.267-269
• /
• 2016

In this paper, we implement a Smart Mailbox using the Arduino and Bluetooth. Smart Mailbox alarm system was combining to the general mailbox. If a mail is arrived to the ultrasonic sensor mounted on the mailbox Smart Mailbox recognizes the mail and sends the smartphone data in real time through the Bluetooth module. Also it stores ultrasonic sensor data in Arduino when bluetooth communication is interrupted. Again it implemented a system for transferring the stored data when the bluetooth communication is made.

• The KIPS Transactions:PartA
• /
• v.17A no.3
• /
• pp.145-152
• /
• 2010

Most wearable system for mobile healthcare applications consists of three parts. The first part is the sensing elements based on bio-signal, the second is the circuit module for control, data acquisition and wireless communication and control and the third is garment with a built-in electrodes and circuits. The existing healthcare garment systems have to find a solution to signal-wire and uncomfortable and inappropriate electrode to long-term attachment. Even if the wireless communication is used for healthcare garment system, the interface between sensors and circuits have to use wires. To solve these problems, this paper use electrode using PEDOT coated PVDF nanoweb for ECG signal and PVDF film sensor for respiratory signal. And, we constructed garment network using digital yarn of 10um, and transmitted ECG and respiratory signal to mobile phone through the integrated circuit with bluetooth called station To evaluate feasibility of the proposed mobile healthcare garment system, we experimented with transmission and measurement of ECG and respiratory signal using nanoweb electrode and digital yarn. We got a successful result without noise and attenuation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.486-491
• /
• 2005

There come various types of robot with researches for mobile robot. This paper introduces the multi-joint snake robot having 16 degree of freedom and composing of eight-axis. The biological snake robot uses the forward movement friction and the proposed artificial snake robot uses the un-powered wheel instead of the body of snake. To determine the enable joint angle of each joint, the controller inputs are considered such as color and distance using PC Camera and ultra-sonic sensor module, respectively. The movement method of snake robot is sequential moving from head to tail through body. The target for movement direction is decided by a certain article be displayed in the PC Camera. In moving toward that target, if there is any obstacle then the snake robot can avoid by itself. In this paper, we show the method of snake robot for tracing the target with experiment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.237-244
• /
• 2018

The Smart Factory level of manufacturing factories of SMEs now lacks a system for grasping the accurate inventory amount associated with inventory movements in managing warehouses at the basic level. Also, it is difficult to manage accurate materials for loss of data due to worker manual work and production method due to experience. In order to solve this problem, in this paper, automatic acquisition of inventory to minimize manual work to grasp workers' Inventory and improve automation is done. In the smart warehouse management system using the IoT-based autonomous mobile module, the autonomous mobile module acquires the data of the inventory storage while moving through the line. In order to grasp the material of the Inventory storage, The Camera module recognizes the name of the inventory storage. And Then, If output matches, the data measured by the sensor is transferred to the server. This data can be processed, saved in a database, and real-time inventory quantity and location can be grasped in a web-based monitoring environment for administrators. The Real-time Automatic Inventory (RAIC) systems is reduce manual tasks and expect the effects of automated inventory management systems.

• Journal of the Korea Convergence Society
• /
• v.10 no.1
• /
• pp.45-51
• /
• 2019

The use of the Internet of things plays a major role in the Fourth Industrial Revolution, and a series of tasks of accumulating, converging, analyzing and reusing various data and services becomes very important. Because the pace and scope if the paradigm shift in Fourth Industrial Revolution is so rapid and unpredictable, the development and utilization of a system to fulfill this role for IOT are urgently required. In this paper, we introduce the Web-based IOT management system, which connects the IOT with OKMindmap, which is a domestic open source software and service, and the Node-RED service. This system combines the advantages of OKMindmap with the advantages of Node-RED, which is capable of visual component based programming, so that it can easily and flexibly connect the IOT based on Web browsers, and various data and services can be integrated and linked. We developed a camera module, a temperature and humidity sensor module, and the motor control module in Raspberry PI basically, and tested the operation successfully. We plan to extend the IOT component gradually by using Arduino and System On Chip.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.437-445
• /
• 2009

Node of USN(Ubiquitous Sensor Network) environments uses radio based communication mechanism for a delivering message. Thus the multiple hop flooding is necessary for considering limited power and communicating unknown node long-range. However if there are many unknown nodes located in users' vision, the flooding of the radio base is insufficient alternative. Thus as a flash may be used to find a key in a darkness, a more direct and short range communication system is required. This study shall resolve such question through 2 different steps. First a Two kind of code method that convert Text message to color code shall be suggested. Second a hardware module, which may deliver various LED(light-emitting diode) color signal, shall be developed. The experiment may take place by fixing the entry angle of light and distance by setting a specific element as a standard mean.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.79-94
• /
• 2021

A GNSS receiver installed in autonomous vehicles is the most essential device for its navigation. However, if an intentional jamming signal is generated, there is a risk of exposure to an accident risk due to deterioration of the GNSS sensor's performance. Research is required to prevent this, and accordingly, a jamming generating device must be provided. However, according to the provisions of the law related to jamming, this is illegal. In this paper, we implement an in-vehicle jamming device that complies with the provisions of the law and does not affect the surrounding GNSS sensors. Driving simulation is used to evaluate the performance of the GNSS algorithm, and the malfunction of autonomous vehicles occurring in the interference environment and data errors output from the GNSS sensor are analyzed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.602-604
• /
• 2016

In this paper, we propose that it can control the interior lighting, LED and alarm clocks based on Bluetooth. The proposed 'Bluetooth based LED Alarm Lamp'may be an ON / OFF by using a Bluetooth module, by the light sensor and voltage transformers were designed to adjust the ON / OFF and light intensity. Also 7-segment display the clock, it was used a piezo-buzzer that designed to ring an alarm in time. And to decrease the voltage by using the touch sensor can adjust the light brightness. It was also added the ability to align the alarm. This piece (Bluetooth based LED Alarm Lamp) can provide a comfortable environment inside the room of a resident if the environment is dark when voltage is maintained to be ON automatic system. And designed with emphasis being able to improve the quality of sleep due to weak light.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.96-105
• /
• 2011

Ubiquitos sensor network(USN) is a technology which is widely used in our life. This paper introduces an example of design and implementation for a system which is based on the USN technology and can provide an efficient management tool for a space that should be precisely controlled for a certain range of uniformity in temperature and humidity. This introduced system builds a wireless sensor network using a number of sensor modules that are equipped with temperature and humidity sensors, and collects temperature and humidity information in real-time while simultaneously providing a method for monitoring the status of temperature and humidity by the graphical user interface. Also, the system will give a warning signal if the monitored values are differ from the pre-specified values of temperature and humidity for each sensor module more than a certain amount of tolerance. This temperature and humidity logging and monitoring system can perform better management for the space easily and efficiently by automating the existing manual method for data collection and management. Furthermore, using the stored data, it can make possible to perform post-analysis on the problems caused by temperature and humidity and to obtain information for environmental enhancement for the space.