• 대한기계학회논문집
• /
• 제15권2호
• /
• pp.537-543
• /
• 1991

In this study, the strain rate effects are considered in the formulation by introducing the constitutive equation of the strain rate sensitive materials and rigid-viscoplastic finite element program is developed for axisymmtric extrusion. The effect of strain rate sensitivity on the flow characteristics and forming pressure are investigated and the experiments are carried out for extrusion with pure lead specimens. The theoretically predicted forming pressure showed reasonably good agreement with the experimental values.

• Structural Engineering and Mechanics
• /
• 제44권5호
• /
• pp.585-600
• /
• 2012

This paper presents a Modified Tikhonov Regularization (MTR) method in model updating for damage identification with model errors and measurement noise influences consideration. The identification equation based on sensitivity approach from the dynamic responses is ill-conditioned and is usually solved with regularization method. When the structural system contains model errors and measurement noise, the identified results from Tikhonov Regularization (TR) method often diverge after several iterations. In the MTR method, new side conditions with limits on the identification of physical parameters allow for the presence of model errors and ensure the physical meanings of the identified parameters. Chebyshev polynomial is applied to approximate the acceleration response for moderation of measurement noise. The identified physical parameter can converge to a relative correct direction. A three-dimensional unsymmetrical frame structure with different scenarios is studied to illustrate the proposed method. Results revealed show that the proposed method has superior performance than TR Method when there are both model errors and measurement noise in the structure system.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권6호
• /
• pp.416-428
• /
• 1999

A user-interactive pixel design tool for high-quality TFT-LCDs is realized and used to explore the sensitivity of the various array and device parameters for optimizing pixel design. In this tool, the Thompson cable equation and gradual-channel approximation were used for the gate time delay and TFT current modeling respectively. With this tool, each capacitance element, and TFT and array dimensions can be optimized under given design specifications. The electrical characteristics such ascharging ratio, gate time delay, pixel voltage level-shift, and holding ratio can be analyzed. The sensitivity analysis of those design parameters were executed and presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.672-675
• /
• 1997

This paper presents the identification of rotor dynamic parameters. The solution of the system equation can be obtained using least square method. The sensitivity analysis is performed to extract optimized solution, which is considered to be insensitive to inherent measurement errors. The cosine and sine term of orbit shapes can be obtained by experiment the orbit analysis at a different speed after doing orbit analysis at an arbitrary selected speed. This values measured time domain used to search the stiffness and damping coefficients of rotor bearing.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2672-2679
• /
• 2000

In synthesizing and RSSS-SC mechanism that is the kinematic model of the McPherson strut suspension system in automobiles, the design equations for R-S, S-S and S-C dyads should be solved separately for a given set of prescribed positions. The number of prescribed positions that the RSSS-SC mechanism can be synthesized is up to three because of the S-C dyad. This limitation may cause unsatisfactory results in synthesized joint positions. This paper presents a kinematic synthesis method to place the joints of an RSSS-SC mechanism in desired boundaries by varying the prescribed positions of the mechanism within acceptable tolerances. The sensitivity analysis of the joint positions is used determine which displacement parameter should be altered to fulfill this task.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1341-1346
• /
• 2009

In this paper, the technique to reinforce the durability performance of structure using the sensitivity information for the frame structure is applied. The fatigue life calculation for the frame structure is performed from the quasi-static and transient analysis and the characteristics of two methods are compared for the fatigue analysis. Then the reinforcement technique is applied. First, some design variables related to the locations of fatigue failure is selected. Then sensitivities of fatigue life at fracture points with respect to the variation of design variables are calculated and the vector composed of gaps between the target life and initial life cycles is calculated. If the number of fatigue fracture points is same as the number of design variables, the variations of the design variables are calculated from the linear algebraic equation. If not, the variations of the design variables are calculated from the optimization formulation with the constraints.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1665-1674
• /
• 1995

An optimum design has been performed to maximize specific energy (SED) of composite flywheel rotor for energy storage system. The flywheel rotor is assumed to be an axisymmetric thick laminated shell with a plane strain state for structural analysis. For the structural analysis the centrifugal force is considered and the stiffness matrix equation was derived for each ring considering the interferences between the rings. The global stiffness matrix was derived by integrating the local stiffness matrix satisfying the conditions of force and displacement compatibilities. Displacements are then calculated from the global stiffness matrix and the stresses in each ring are also calculated. 3-D intra-laminar quadratic Tsai-Wu criterion is then used for the strength analysis. An optimum procedure is also developed to find the optimal interferences and lay up angle to maximize SED using the sensitivity analysis.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.955-963
• /
• 2005

This research investigates dynamic characteristics of a linear motion (LM) guide through a experimental result and theoretical analysis. The stiffness in the LM guide is determined by the preloading due to the minus clearance between the ball bearing and the contact surface and it can be derived by Hertzian contact theory and the nonlinear motion of equation. The vibration analysis is performed using Lagrange equations and its result agrees with the experiment result. Using the sensitivity analysis on design parameters such as the contact angles of ball bearings and the eccentricity of mass center, the variation of the natural frequencies can be predicted.

• Journal of Ship and Ocean Technology
• /
• 제3권3호
• /
• pp.25-44
• /
• 1999

Estimation efficiencies according to different sea trial are investigated in connection with sensitivity analysis, and new trial method is proposed which can improve the estimation efficiency of hydrodynamic derivatives. MMG Equation with Kijima's formula is used for simulation. Extended Kalman Filter is chosen for estimation technique and hydrodynamic derivatives of interest is limited to 12 of those in sway and yaw equations. Esso Osaka is selected for the test ship. Sensitivity analysis and estimation results based on conventional trials show that a more sensitive derivative gives more efficient estimation result. Sensitivities of nonlinear derivatives become pronounced in the trial where steady condition lasts longer such as turning test, while sensitivities of linear derivatives gas a larger values in the trial where unsteady condition lasts longer such as 10deg-10deg zigzag test. Consequently, in new method , named S-type trial, steady and unsteady condition are combined appropriately to increase sensitivities. Linear derivatives are estimated better in S-type trial and the estimation of nonlinear derivatives is improved to extent.

• 산업경영시스템학회지
• /
• 제22권51호
• /
• pp.1-10
• /
• 1999

In recent industry society, it is revealed that, as an increase in the use of automated manufacturing and process inspection technology, the data from mass production system exhibits some degrees of autocorrelation. The operation characteristics of traditional control charts developed under the independence assumption are adversely affected by the presence of serial correlation. Therefore, when autocorrelated construction contacted with time-series models explain, the time-series models are the Box-Jenkins forecast models which have been proposed as the best forecasting tool which allows for partitioning of variation into result from the autocorrelation structure and variation due to unusual but assignable causes. In this paper, for the AR(1) process of Box-Jenkins forecast models, when the constant term ξ are zero and different from zero, I want to analyze the sensitivity of (equation omitted), CUSUM and EWMA control chart for forecast residuals.