• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.6
• /
• pp.505-510
• /
• 2013

An encircling send-receive type pulsed eddy current (PEC) probe is designed for use in aluminum tube inspection. When bare receive coils located away from the exciter were used, the peak time of the signal did not change although the distance from the exciter increased. This is because the magnetic flux from the exciter coil directly affects the receive coil signal. Therefore, in this work, both the exciter and the sensor coils were shielded in order to reduce the influence of direct flux from the exciter coil. Numerical simulation with the designed shielded encircling PEC probe showed the corresponding increase of the peak time as the sensor distance increased. Ferrite and carbon steel shields were compared and results of the ferrite shielding showed a slightly stronger peak value and a quicker peak time than those of the carbon steel shielding. Simulation results showed that the peak value increased as the defect size (such as depth and length) increased regardless of the sensor location. To decide a proper sensor location, the sensitivity of the peak value to defect size variation was investigated and found that the normalized peak value was more sensitive to defect size variation when the sensor was located closer to the exciter.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.504-505
• /
• 2011

Decreasing actual greenhouse gas will be difficult if it is not solved addressed in architectural fields. Zero emission building or zero energy building, maximize the efficiency of energy, which means the building can operate by their own renewable energy facility without any other supplying. To be a zero emission building, a building needs realization of high efficiency low energy consumption, construction of building its own energy production facilities and lastly a power grid connection. According to increasing of DC load about TV, LED lighting, computer, IT in building for living and business, it is expected the save of energy when the system of AC power distribution change into the system of DC power distribution. Renewable energy exists a big different rate produced by outside environment. When electrical power overproduce, it can supply for system. Otherwise, if electrical power produce less, it can receive supply from system. Send and receive power can lead to zero to annual standard. This paper shows the simulation about efficient control of power conversion which is related to DC power distribution of architecture and DC output of renewable energy by using L-type converter.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.20-25
• /
• 2004

The existing antenna that equipped with Micro Aerial Vehicle, microstrip antenna only can send and receive image signal because of limited bandwidth. But, proposed antenna that equipped with Micro Aerial Vehicle flight introduces tapered type patch antenna, also improves bandwidth then can transfer present location, altitude, movement speed. Furthermore, as a result of introduce stacked type, it transfers more quality of image signal, and represents most suitable performance in Korean peninsula that has many mountain peaks. In this paper, to transmit and receive the wideband signals with a antenna system, the wideband microstrip antenna is proposed and designed. This antenna operates at 2.4GHz. In this thesis, the resonance frequency of 2.4GHz and the reflective loss of the antenna of -22dB were calculated by measuring the fabricated Tapered Microstrip Patch Antenna which was designed with the resonance of 2.4GHz. The calculated gain and efficiency of antenna were 6.7dB and $60\%$ respectively. The characteristic of the bandwidth shows with $50\~60MHz$ which is $6.02\%$ at the basis of -l5dB reflective loss. The experimental results can be used in the characteristic of the resonators and this antenna produces a greatly enhanced bandwidth.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.778-798
• /
• 2014

This paper proposes a novel exposed-terminal-eliminated medium access control (ETE-MAC) protocol by combining channel reservation, collision avoidance and concurrent transmissions to improve multi-access performance of the multihop wireless networks. Based on the proposed slot scheduling scheme, each node senses the control channel (CCH) or the data channel (DCH) to accurately determine whether it can send or receive the corresponding packets without collisions. Slot reservation on the CCH can be simultaneously executed with data packet transmissions on the DCH. Therefore, it resolves the hidden-terminal type and the exposed-terminal type problems efficiently, and obtains more spatial reuse of channel resources. Concurrent packet transmissions without extra network overheads are maximized. An analytical model combining Markov model and M/G/1 queuing theory is proposed to analyze its performance. The performance comparison between analysis and simulation shows that the analytical model is highly accurate. Finally, simulation results show that, the proposed protocol obviously outperforms the link-directionality-based dual-channel MAC protocol (DCP) and WiFlex in terms of the network throughput and the average packet delay.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.159-162
• /
• 2003

In this paper, we present a middleware that using routing scheme that support easily for various type of network in a home network based heterogeneous network. The protocol presented in this paper, consist two layers that Network Adaptation Layer(NAL) to allow access varience networks and Network Interface Layer(NIL) to deal network dependent parts. The middleware presentedl in this paper, can easily send data to any digital appliance or receive data from any digital appliance by using our routing scheme.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.280-285
• /
• 2008

ZigBee is Low Power and Low Data Rate Wireless Communication protocol. It apply to much Ubiquitous Sensor Network. ZigBee PAN is two type PAN. One is Beacon Enabled PAN, the other is Non Beacon Enabled PAN. To support Low Power in Non Beacon Enabled PAN, End-Device enter Active status at End-Device's wishing time and send a data. So, Router does not know End-Device sends a data time. To solving this problem, Router must always exist to Active status. In this case, Router receive a power supply always in Non Beacon Enabled PAN. But Router does not receive a power supply always, Router can not normal operation, such as Router use a battery. To solve this problem, Router will be support low power. In this paper, we will present Router's Low Power Algorithm. And we suggest 'PAN Time'. Device use 'PAN Time' for PAN synchronous. Router using Low Power Algorithm can be enter to inactive status. So Non Beacon Enabled PAN of Router support the low power mode Therefore Router does not receive a power supply always, Router can normal operation.

• The KIPS Transactions:PartD
• /
• v.9D no.2
• /
• pp.313-322
• /
• 2002

Multimedia conference systems are classified into the tightly coupled conference and the loosely-coupled conference, the former is a peer-to-peer-conference or multi-point-conference based un the ITU-T H.323 standard, and the latter is the H.332 standard extended from the ITU-T H.323 standard. Loosely-coupled conference based on the H.332 standard is composed of small participants with the capacity of the send-receive mode and large participants with the capacity of the receive-only mode. In the H.332 conference, a subject and a media type of the multimedia conference is pre-announced for conquest of the difficulty of capability negotiation, and used SDP of IETF for that. Therefore, the H.332-conference can conquer a defect of the H.323 multimedia conference scalability. This paper analyzes H.332 standard for the loosely-coupled conference and describes an implementation of the H.332 multimedia conference systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.57-60
• /
• 2001

In this paper, I will describe the trends of multicast address allocation mechanism. IP Multicast efficiently supports this type of transmission by enabling sources to send a single copy of a message to multiple recipients who explicitly want to receive the information. Generally, MAAs server or MADCAP servers are used to allocate multicast addresses. As the need of home networking and autoconfiguring network mechanism has been increased, not only automatic host IP configuration but also automatic multicast address generation mechanism was demanded. in this paper, I will explain the automatic multicast address mechanism in a host. management techniques and the trends of multicast address generation and allocation mechanism that is bong now discussed In IETF.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.1
• /
• pp.50-57
• /
• 2009

Heliostat in the tower type solar thermal power plant is a mirror system tracking the sun's movement to collect the solar energy and it is the most important subsystem determining the efficiency of solar thermal power plant. Thus a good performance of it, which is mostly the accurate sun tracking performance under the various hazardous operating condition, is required. Heliostat control system is a system to manage the heliostat sun tracking movement and other operations. It also communicates with the master controller through the heliostat filed control system to receive and send the informations required to operate the heliostat as a part of the solar thermal power plant. This study presents a heliostat control system designed and developed for the 1MW solar thermal power plant. We first define the functionality of heliostat control system. Then sun tracking controller as well as the sun tracking algorithm satisfying the required functionality have been developed. We tested the developed heliostat control system and it showed a good performance in regulation of heliostat motion and communication.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.143-150
• /
• 2023

Underwater wireless communication is a challenging issue for realizing the smart aqua-farm and various marine activities for exploring the ocean and environmental monitoring. In comparison to acoustic and radio frequency technologies, the visible light communication is the most promising method to transmit data with a higher speed in complex underwater environments. To send data at a speedier rate, high-performance photodetectors are essentially required to receive blue and/or cyan-blue light that are transmitted from the light sources in a light-fidelity (Li-Fi) system. Here, we fabricated high-performance organic phototransistors (OPTs) based on P-type donor polymer (PTO2) and N-type acceptor small molecule (IT-4F) blend semiconductors. Bulk-heterojunction (BHJ) PTO2:IT-4F photo-active layer has a broad absorption spectrum in the range of 450~550 nm wavelength. Solution-processed OPTs showed a high photo-responsivity >1,000 mA/W, a large photo-sensitivity >10³, a fast response time, and reproducible light-On/Off switching characteristics even under a weak incident light. BHJ organic semiconductors absorbed photons and generated excitons, and efficiently dissociated to electron and hole carriers at the donor-acceptor interface. Printed and flexible OPTs can be widely used as Li-Fi receivers and image sensors for underwater communication and underwater internet of things (UIoTs).