• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.679-687
• /
• 2011

Implementation of semi-public management system of intra-city bus achieve excellent results but there are some side effects like increase of the fatal traffic accidents. This study tries to develop decision making model of measures of reducing traffic accidents following implementation of semi-public management system of intra-city bus. And survey with traffic experts and analytic hierarchy process are used for data survey and analysis. Quantitative measures and qualitative measures are suggested as high assessment items of AHP. Quantitative measures of low assessment items composed of a raise in the number of bus and safety device installation, facility supplement of bus stop, supplement of pedestrian protection facility, traffic safety assessment and supplement. Qualitative measures composed of system organization, redesign bus route, reinforcement of education, campaign and enforcement. The results of this study are as follows. First, the result turns out more weights are calculated on quantitative measures than on qualitative measures. Second, It is turned out in order of facility supplement of bus stop and traffic safety assessment and supplement as the quantitative measures. Third, as qualitative measures, system organization and redesign bus route are in the order. The results of this study are considered to be a basic data which can be referred if measures on the decrease of traffic accident are established and implemented in other cities and provinces.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.4
• /
• pp.335-341
• /
• 2020

This study investigates the association of the AFB stain with the cycle threshold (Ct) value of the Cobas TaqMan MTB test (CTM test, Roche Diagnostics, Basel, Switzerland), and it establishes the base data for semi-quantitative identification of M. tuberculosis by the Ct value. CTM test were simultaneously conducted on 8,389 specimens submitted to the Samsung Medical Center from January 2015 to December 2015, and the results were analyzed and compared retrospectively investigates the association of the AFB stain with the Ct value of the CTM test, and it establishes the base data for semi-quantitative identification of M. tuberculosis by the Ct value. The Ct values for 135 positive specimens of the CTM were inversely correlated with the AFB stain (rs=-0.545, P<0.01). When the Ct value of the CTM test and the time to positivity (TTP) of the mycobacteria cultures were verified based on the AFB stain, they were found to have a positive correlation (rs=0.136, P<0.01). The negative correlation between the CTM test and the AFB stain grade was demonstrated. The clinical significance was verified by applying these criteria to the clinical results. The semi-quantitative criteria of this study can be used to facilitate the rapid isolation of patients with active tuberculosis and infection control in the hospital.

• The Korean Journal of Applied Statistics
• /
• v.29 no.6
• /
• pp.1007-1023
• /
• 2016

This paper explores the conditions and potential of newly designed and tried methodology of big data analysis that apply to Korean history subject matter. In order to advance them, we need to pay more attention to quantitative analysis methodologies over pre-existing qualitative analysis. To obtain our new challenge, I propose 'digital history' methods along with associated disciplines such as linguistics and computer science, data science and statistics, and visualization techniques. As one example, I apply interdisciplinary convergence approaches to the principle and mechanism of elite reproduction during the Korean medieval age. I propose how to compensate for a lack of historical material by applying a semi-supervised learning method, how to create a database that utilizes text-mining techniques, how to analyze quantitative data with statistical methods, and how to indicate analytical outcomes with intuitive visualization.

• The Korea Journal of Herbology
• /
• v.36 no.1
• /
• pp.87-95
• /
• 2021

Objective : Liquidambaris Storax, the processed resin of Liquidambar orientalis Mill., has been therapeutically used as orifice-opening medicinals in Korean Medicine. However, unauthenticated resinous drugs from various origins were sold as Liquidambaris Storax. This study aimed to establish the quality assessment of genuine Liquidambaris Storax and to provide quantitative differences of Liquidambaris Storax in herbal markets. Methods : Bibliographic research on ancient Liquidambaris Storax was performed using classic books of herbology. The quality assessment was approached by searching modern books of herbal medicines. The marker compounds in Liquidambaris Storax from various origins were quantitatively analyzed using high-performance liquid chromatography. Results : L. orientalis was botanically characterized by palmately 5-lobed shape of leaves. Genuine Liquidambaris Storax was recognized as resinous or semi-solid form (ancient―Song dynasty) to liquid form (Myeong/Cheong dynasty) and two processed forms were available in current markets. Genuine liquid Liquidambaris Storax should be lengthened as a thread when it was lifted by a stick and be sunken under the water. The crystals of cinnamic acid was seen under microscopic observation and the scent of benzaldehyde occurred after the treatment with potassium permanganate. Cinnamyl alcohol, cinnamic acid, and cinnamaldehyde were quantified in two liquid samples of Liquidambaris Storax, while cinnamaldehyde was not quantified in resinous (semi-solid) sample. Conclusion : This study presents the detailed methods of quality assessment for genuine Liquidambaris Storax as well as the status in the herbal markets. Further quantitative study with diverse samples is required to establish the quality standard of Liquidambaris Storax.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.164-170
• /
• 2019

The absorption and release capacities, survival efficiency, and recovery rates of five kinds of transport media were evaluated based on the swab elution method (Quantitative) of CLSI (Clinical and Laboratory Standards Institute) M40-A2. Liquid media showed mostly better results than semi-solid media in the three evaluations. The flocked swabs had better ability to absorption and discharge bacteria than the standard swabs. The liquid medium (S4) had the best survival efficiency. Pneumococcal strains with poor growth had a higher survival efficiency and recovery rate in liquid media (S4, S5). The results of microbial recovery showed that S. pyogenes met all the CLSI standards in all media. S. pneumoniae was inadequate in the semi- solid media (S2, S3) and all the remaining media met the criteria. H. influenzae was unsuitable in semi-solid media (S1, S3) and met the criteria in semi-solid medium (S2) and liquid medium (S4, S5). The viability of the H. influenzae, pneumococcal strain causing respiratory disease, was poor in most media. Overgrowth of P. aeruginosa was observed at room temperature. The combination of liquid medium and flocked swab confirmed the best results in the three evaluation methods.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.37-41
• /
• 2018

Process safety technology has developed from qualitative methods such as HAZOP (hazard and operability study) to semi-quantitative methods such as LOPA (layer of protection analysis), and quantitative methods are actively studied these days. Quantitative risk assessment (QRA) is often based on fault tree analysis (FTA). FTA is efficient, but difficult to apply when failure events are not independent of each other. This problem can be avoided using a Markov process (MP). MP requires definition of all possible states, and thus, generally, is more complicated than FTA. A method is proposed in this work that uses an MP model and a Weibull distribution model in order to construct a reliability model for multiple dependent failures. As a case study, a pressure safety valve (PSV) is considered, for which there are three kinds of failure, i.e. open failure, close failure, and gas tight failure. According to recently reported inspection results, open failure and close failure are dependent on each other. A reliability model for a PSV group is proposed in this work that is to reproduce these results. It is expected that the application of the proposed method can be expanded to QRA of various systems that have partially dependent multiple failure states.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.6
• /
• pp.13-27
• /
• 2006

The goal of this study is to propose the effective way of finding injurious factors and making improved plan that prevents the workers against musculoskeletal disorders at a semi-finished medical product fabricating company A questionnaire and an ergonomic assessment method were adopted to analyze the symptoms of workers' musculoskeletal disorders, and an analysis of working postures and a quantitative assessment on various processes were performed to find out harmful factors of workplace. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. It can be concluded that the method and process described in this paper could be helpful for diagnosing the musculoskeletal disorders and making improvement plans to the company with similar working conditions and process.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.43-57
• /
• 2007

This paper considers the technological competitiveness of aircraft infra industries that are bases of the aircraft industry development in Korea. We performed focus group interviews to aircraft industry specialists and classified the aircraft infra industries by eight fields: metallurgical assembly, general machinery, precision instruments, materials & parts, communication appliances, computer, semi-conductor/ electronic component, electronics. Through the United States patents analysis for the G7 countries and Korea during 1995-2006, we identified the technological specificities and competences of each country. RTA(Revealed Technology Advantage) index and CII(Current Impact Index) are used to examine the technological specificity and technological competence respectively. Finally, we introduced TCI(Technological Competitiveness Index) which could reflect quantitative level as well as qualitative level of patents for each aircraft infra industry. The results show that Korea has occupied the technological competitiveness in the semi-conductor and electronic component industry out of eight aircraft infra industries, and achieved a competitive edge in communication appliance industry in the mid 2000s.

• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.3
• /
• pp.491-501
• /
• 2007

This study deals with bottom debris and benthos which have obtained by using a beam trawler in Chinhae bay, Korea. The temperature and salinity didn't impact on the fish species and weights in the bay. But bottom debris is dominated on the precipitation into the bay. And it also was nearly very soiled owing to geographical condition of semi-enclosed bay. Moreover, all debris was not related on the quantitative variability of benthos. On the other hand, it was revealed to be reverse-correlative with fish species and positive-correlative with fish weights.

• Analytical Science and Technology
• /
• v.28 no.2
• /
• pp.79-85
• /
• 2015

A preliminary experiment was performed to develop a fast, convenient, and economical semi-quantitative method of analyzing amphetamine-like amines from images of derivatives. These were generated from the reaction (in situ, co-spot) of three amphetamine-like compounds with three derivatization reagents on a TLC plate. The attempt was made to optimize the reaction conditions for an efficient derivatization reaction, and TLC images taken by a digital camera were analyzed using two types of image analysis program (CP Atlas 2.0 and ImageJ) for repeatability (RSD, %) and linearity (R²). Then, their results were compared. For efficient derivatization, the reaction conditions needed to be modified. The results of image analysis of each of the samples at two different concentrations (0.5 mg/mL and 0.01 mg/mL) showed that the RSD values for reaction repeatability were in the range of 0.69-5.50%. From the calibration curves between the area of the derivative and the concentration of amines, the R² values (R² > 0.9906) for good linear correlation were found to be high, in a concentration range of 0.1-0.005 mg/mL of amines. In addition, the two programs demonstrated little difference in the analysis of repeatability and linearity of the derivatization, so that the current method has the potential to be used for the semi-quantitative analysis of amines.