• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.916-922
• /
• 1986

This paper presents the preliminary results of an experimental study on surface crack growth under fatigue loadings. The objective of this paper is to assess the effect of the initial crack size on crack propagation behaviors. Transparent PMMA plate speciments with shallow circular arc notch were used. Crack growth behaviors were observed and measured in two directions by travelling microscopes. The fatigue crack initiated at the deepest part on the initial arc shaped notch and then propagated to depth direction as well as spreading gradually along the notch tip. A considerable number of cycles was needed until the depth crack spreaded to the surface notch tip. When the fatigue crack reached the surface notch tip the crack front became an approximate semi-ellipse, primary semi-elliptical crack. Test results suggest that the relationships between fatigue crack growth rate and stress intensity factor range in both directions can be expressed by power law (Paris) and that relationship in width direction depends upon the crack ratios a$_{1}$/b$_{1}$, of the primary semi-elliptical crack. The relationship between the nondimensional crack lengths in both directions can be represented as the formula: (a/t)$^{n}$ =B(2b/W+A) where n and A are constants and B is seems to be depended upon the crack ratio a$_{1}$/b$_{1}$.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.153-160
• /
• 2008

Seismic modeling is used to simulate wave propagation in the earth. Although the earth's subsurface is usually semi-infinite, we cannot handle the semi-infinite model in seismic modeling because of limited computational resources. For this reason, we usually assume a finite-sized model in seismic modeling. In that case, we need to eliminate the edge reflections arising from the artificial boundaries introducing a proper boundary condition. In this study, we changed three kinds of boundary conditions (sponge boundary condition, Clayton and Engquist's absorbing boundary condition, and Higdon's transparent boundary condition) so that they can be applied in elastic wave modeling for anisotropic media. We then apply them to several models whose Poisson's ratios are different. Clayton and Engquist's absorbing boundary condition is unstable in both isotropic and anisotropic media, when Poisson's ratio is large. This indicates that the absorbing boundary condition can be applied in anisotropic media restrictively. Although the sponge boundary condition yields good results for both isotropic and anisotropic media, it requires too much computational memory and time. On the other hand, Higdon's transparent boundary condition is not only inexpensive, but also reduce reflections over a wide range of incident angles. We think that Higdon's transparent boundary condition can be a method of choice for anisotropic media, where Poisson's ratio is large.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.421-428
• /
• 2003

The kinetics of photoinitiated polymerization of reactive oligomer methacrylates and oligomer methacrylate/SBS blends have been studied to characterize the diffusion-controlled reaction using Fourier Transform Infrared Spectroscopy-Attenuated Total Reflectance (ATR-FTIR). The polymerization rates of reactive oligomer methacrylates and oligomer methacrylate/SBS blends were autocatalytic in nature at the initial stage and then a retardation of the reaction conversion occurred gradually as the polymer matrix became vitrified, and finally the reaction became diffusion controlled. Photopolymerization behavior of methacrylate/SBS blends was well predicted using the diffusion-controlled reaction model. N-Vinyl-2-pyrrolidinone (NVP) as a reactive solvent was used to incorporate SBS into methacrylate to form semi-IPN via photopolymerization. Due to the high reactivity of NVP, polymerization rate increased with the increase of NVP content. As the content of NVP-SBS in the blends increased up to 10 phr, the reaction conversion maintained almost constant. But above 20 phr of NVP-SBS in the blends, the reaction conversion gradually decreased since the increase of viscosity affected on the photopolymerization rate. The semi-IPN films of methacrylate/SBS blends were transparent at room temperature as well as at increased temperature and were able to be applied to surface coating.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.199-203
• /
• 2014

Terpolymer syrups were photopolymerized from 2-ethylhexyl acrylate, 2-hydroxylethyl acrylate and isobornyl acrylate to prepare acrylic pressure sensitive adhesives (PSAs). After polymerization, various crosslinkers as 1,6-hexanediol diacrylate (HDDA), poly (ethylene glycol) diacrylate (PEGDA, Mn = 250, 575, and 700) were added and then UV-irradiated to prepare the semi-IPN type PSAs. Their adhesion performance and storage modulus (G') were strongly dependent on their chemical structure and molecular weight of the crosslinkers. Optical properties such as transmittance (> 92.5 %), haze (< 1.0 %) and color-difference (< 0.3) of PSAs samples were not affected by crosslinker types used in this study.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.81-90
• /
• 1992

This paper deals with an experimental study on the initial condition of liquid film surface waves disintegration and investigation on the behavior of liquid film surface waves formed by the high speed air flow on the solid plane surface. The authors conducted the qualitative and quantitative study to in vestigate the liquid film flow phenomena, the liquid film disintegration mechanism, and droplet formation process with breaking the liquid film surface wave. The newly devised transparent rectangular test section which has semi-two-dimensional flow at the center of the bottom was introduced to perform the experimental study, and it can generate the uniform thickness liquid film at the bottom. The strobo streak camera was used to obtain the instantaneously transformed photographs. The electronic measuring device was also used to measure the liquid film thickness variation in order to perform the easy and effective analysis of complex flow phenomena in the air-water cocurrent flow.

• Journal of Biomedical Engineering Research
• /
• v.12 no.2
• /
• pp.79-88
• /
• 1991

Semi-transparent volume rendering technique can provide 3-D visualization well by voxel level Processing and alleviate segmentation arf, ifacts compared wish the surface rendering technique. In this Paper, we consider several new schemes which can improve she Perform ance of volume rendering. A directional interpolation method is proposed to reduce the artifact due to the anisotrophic resolution in X-ray CT data. The computation time for rendering is shortened by using the depth information of the 3-D object. And also, we reduce the quantization artifacts in the rendering by introducing the opacity-dependent sampling interval to sampling in ray-tracing.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.9 no.3
• /
• pp.47-57
• /
• 2009

The purpose of this study is to propose the design elements useful to give place identity to street space. The theory for place identity is studied and the components-Physical element, Sense, Program, Activity, Context-for identity of place is created. In the case study of SamcheongdongGil, the qualitative research method of Free Picturing Technique and Cognitive Mapping is executed and the samples gathered from the research are analyzed. In the process of analysis, the contents of qualitative evaluation by users is put in order as components for identity of place. Moreover, the design elements for street space are extracted from the case study and theories of urban design. The design elements are summarized as the followings: street pattern with high permeability, various streetscapes, greenscapes, semi public(private) spaces, the third places, public arts, transparent facades, and outdoor activities. Finally, the fruits and boundary of this study are described and the importance of place identity is.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1106-1107
• /
• 2008

Building Integrated PV(BIPV) is one of the best fascinating PV application technologies. To apply PV module in building, various factors should be reflected such as installation position, shading, temperature, and so on. Especially a temperature should be considered, for it affects both electrical efficiency of a PV module and heating/cooling load in a building. It reports the effect of thermal characteristics of the PV module on generation performance. The study was performed by monitoring the temperature and experiment. The results showed that 1 degree temperature rise reduced about 0.48% of output power.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1087-1090
• /
• 2008

This paper presents the electro-luminescence (EL) display lamp which is patterned on a curved surface by the pad printing method. The printing methods, including the gravure, screen, flexo, inkjet, and pad printing, have an advantage of one-step direct patterning. However, in general, the printing and semi-conductor process, except pad printing method, cannot be applied for patterning on a curved surface. Thus, in this paper, we used pad printing method for patterning an EL display lamp on a curved surface. The EL display lamp consists of 5 layers: Bottom electrode; Dielectric layer; Phosphor; Transparent electrode; Bus electrode. Finally, we printed EL display lamp on a dish, which has a radius of curvature 80mm. The EL display lamp was driven at AC 200V of 1kHz.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10c
• /
• pp.340-342
• /
• 2002

결함허용은 어떠한 시스템 요소에 결함이나 오류가 발생하더라도 시스템이 정상적으로 동작하게 하는 방안으로써 실시간 분산 시스템에서 피 효용성이 극대화된다. 본 연추는 실시간 분산 시스템의 결함 허용 기법 중 시간 제약성 측면에서 강한 여분기반 결함허용 기법을 수용한다. 이 기법의 구성 요소인 어플리케이션 서버는 그 상태가 결정적(deterministic)이냐 비결정적(nondeterministic)이냐에 따라 그 처리 기법을 달리하고 있다. 그 중 SAR(Semi-Active Replication)이 자원 활용도 측면에서 그 효율성 증명된바 있다. 본 논문에서는 SAR의 단점인 응답시간 지연문제와 클라이언트 측면에서의 결함 마스킹(fault-masking) 문제를 해결한 구조를 제안한다.