본 연구는 사회복지 교육이 사회복지 가치의 형성과 사회복지 옹호실천에 어떠한 영향을 미치는가를 살펴보았다. 또한 사회복지 옹호실천에 대한 사회복지 교육의 직접효과뿐 아니라 사회복지 가치를 매개로 한 간접효과를 검증함으로써 사회복지 옹호 실천에 있어서의 사회복지 가치의 중요성을 보여주고 있다. 조사대상자는 2004년에 서울과 경기지역의 사회복지관에서 근무하고 있는 242명의 사회복지사이며, 조사도구로는 사회복지 옹호태도, 사회복지 옹호전략, 사회복지 교육성과, 사회복지 가치, 자존감, 통제소재 척도를 사용하였다. 수집된 자료는 SPSS/PC+ 12.0을 사용하여 기술통계분석, 피어슨의 상관관계, 신뢰도 분석, 요인분석, 다중회귀분석을 통한 경로분석을 실시하였다. 본 연구는 사회복지옹호실천을 높이기 위해서는 인간행동과 사회환경, 실천론, 정책론, 조사론 및 실습 등의 기본적 방법론을 충실히 하는 것과 사회적 차원의 사회복지가치의 함양이 중요하다는 것을 실증적으로 보여주었다는 데에 의의가 있다. 또한 기존에 이루어지고 있는 사회복지 교육과정의 전반적인 재검토와 개인적 차원에 머무르고 있는 사회복지 가치의 체계를 사회적 차원으로 확대하고자 하는 방향성을 제시하였다는 데에 의의가 있다.
The lack of a comprehensive theory describing the mechanism of adaptation scientifically has been one of the limiting factors for the development of nursing intervention of patients with chronic illness. Since Roy's theory provides the general conceptual framework depicting adaptation process with structural stimuli and control mechanism, it is appropriate to understand the process of adaptation. But in Roy's theory, the propositions about cognator and regulator as control mechanisms are not clearly defined. For this reason, most of the previous researches applying the Roy's theory have disregarded the study of cognator and regulator. For the patients with chronic illness such as rheumatoid arthritis, it was reported that adaptation states were different for the same stimuli due to the difference of the control mechanism. Moreover in nursing it is important to identify the control mechanism which can be and must be intervened by nurses. It was the Lazarus and Folkman's theory that proposed the control mechanism. They suggested that individual differences in the reaction against the perceived stress are due to the difference in appraisal and coping. Therefore, the synthesis of Roy's and Lazarus and Folkman's propositions might help to clearly understand the mechanism of adaptation. From this point, a theoretical framework has been developed and tested. The subjects were the 297 patients who had been diagnosed rheumatoid arthritis and attended the outpatient clinic. A hypothetical prediction model of adaptation was tested by the covariance structure analysis with PC-LISREL 7.13. As a result, the overall fit was good($x^2$=78.83, p=0.00 ; GFI=0.96 : AGFI=0.90 ; RMR=0.04) for the hypothetical model. In the final model added GA(5, 1), the overall fit was increased ($x^2$=57.82, p=0.003 ; GFI=0.97 ; AGFI=0.93 : RMR=0.036). Except the fact that illness symptoms affected physical adaptation directly, it was supported that focal and contextual stimuli affected physical and psychosocial adaptation through appraisal and coping. Therefore, it was asserted that the synthesis of two theory's propositions was appropriate. So this model would be useful for the theoretical framework in the nursing practice. And this study synthesizing and testing the theory might contribute to establish nursing's scientific base.
The purpose of this study was to investigate the effect of acid etching on the surface appearance and fracture toughness of five glass ionomer cements. Five kinds of commercially available glass ionomer cements including chemical curing filling type, chemical curing lining type, chemical curing metal reinforced type, light curing tilling type and light curing lining type were used for this study. The specimens for SEM study were fabricated by treating each glass ionomer cement with either visible light curing or self curing after being inserted into a rubber mold (diameter 4mm, depth 1mm). Some of the specimens were etched with 37% phosphoric acid for 0, 15, 30, 60, go seconds, at 5 minutes, 1 hour and 1 day after mixing of powder and liquid. Unetched ones comprised the control group and the others were the experimental groups. The surface texture was examined by using scanning electron microscope at 20 kV. (S-2300, Hitachi Co., Japan). The specimens for fracture toughness were fabricated by curing of each glass ionomer cement previously inserted into a metal mold for the single edge notch specimen according to the ASTME399. They were subjected to a three-point bend test after etching for 0, 30, 60, and 90 seconds at 5 minutes-, 1 hour-and 1 day-lapse after the fabrication of the specimens. The plane strain fracture toughness ($K_{IC}$) was determined by three-point bend test which was conducted with cross-head speed of 0.5 mm/min using Instron universal testing machine (Model No. 1122) following seven days storage of the etched specimens under $37^{\circ}C$, 100% humidity condition. Following conclusions were drawn. 1. In unetched control group, crack was present, but the surface was generally smooth. 2. Deterioration of the surface appearance such as serious dissolving of gel matrix and loss of glass particles occured as the etching time was increased beyond 15 s following Immediate etching of chemical curing type of glass ionomer cements. 3. Etching after 1 h, and 1 d reduced surface damage, 15 s, and 30s etch gave rough surface appearance without loss of glass particle of chemical curing type of glass ionomer cements. 4. Light curing type glass ionomer cement was etched by acid, but there was no difference in surface appearances according to various waiting periods. 5. It was found that the value of plane stram fracture toughness of glass ionomer cements was highest in the light curing filling type as $1.79\;MNm^{-1.5}$ followed by the light curing lining type, chemical curing metal reinforced type, chemical curing filling type and chemical curing lining type. 6. The value of plane stram fracture toughness of the chemical curing lining type glass ionomer cement etched after 5 minutes was lower than those of the cement etched after 1 hour or day or unetched (P < 0.05). 7. Light curing glass ionomer cement showed Irregular fractured surface and chemical curing cement showed smooth fractured surface.
The purpose of this study was to evaluate the tensile bond strength to tooth structure of composite resin and glass ionomer cement according to filling methods and light curing units. In this study, two class V cavities were prepared on the buccal surface of each tooth of 140 extracted human molars, and they were randomly assigned into 3 experimental groups with 40 teeth and control group with 20 teeth. And then, each experimental groups subdivided into 2 groups(A,B) according to light curing units. The cavities of each group were filled with the CLEARFIL FII self curing resin(Control Group), Z-100 light curing resin(Group 1), Vitremer$^{TM}$ light curing glass ionomer cement(Group 2) and Z-100 light curing resin over the Vitrebond$^{TM}$ liner(Group 3). And subdivided A Group used Argon Laser(SPECTRUM$^{TM}$, U.S.A.), B Group used XL 1,000 curing light (3M, U.S.A.). The specimens underwent temperature changed from $5^{\circ}C$ to $55^{\circ}C$ five hundred times. After thermocycling, specimens were stored in 100% relative humidity at $37^{\circ}C$ for 24 hours. And then, the tensile bond strength of specimens were calculated with Universal Testing Machine(AGS-100A, Japan). The results were as follows : 1. Among the experimental groups, the group 2-B showed the highest tensile bond strength ($18.89{\pm}7.80$) and the group 1-A showed the lowest tensile bond strength ($11.68{\pm}2.28$). There was significant difference between group 2-B and group 1-A(p<0.01). 2. Between the light curing units, the XL 1,000 unit showed higher tensile bond strength ($16.63{\pm}3.20$) than that of the Argon Laser unit ($13.73{\pm}2.30$). There was significant difference between XL 1,000 and Argon Laser(p<0.01). 3. About filling methods and materials, the group 2 showed the highest tensile bond strength ($17.56{\pm}1.89$) and the group 1 showed the lowest tensile bond strength($13.03{\pm}1.90$). There was significant difference between group 2 and group 1,3(p<0.01). In conclusion, the results showed that the glass-ionomer cement that cured by XL 1,000 light curing unit demonstrated significantly higher tensile bond strength than other curing unit and filling methods.
연구목적: 이 연구는 2종의 전부식 접착제와 4종의 자가부식 접착제를 이용하여 유동성 레진을 법랑질에 접착할 경우, 접착제에 따른 미세전단 결합강도와 파절양상을 비교하기 위하여 시행하였다. 연구 재료 및 방법: 발거된 60개의 대구치 치관의 법랑질을 이용하였고, 사용된 접착시스템의 종류에 따라 6개의 군; OS 군(One-Step), SB 군(Single Bond), SE 군(Clearfil SE Bond), TY 군(Tyrian SPE와 One-Step Plus), AP 군(Adper prompt L-Pop), GB 군(G-Bond)으로 분류하였다. 각 군의 법랑질 표면에 배정된 접착시스템을 적용한 후, Tygon tube를 이용하여 법랑질 표면에 유동성 레진(Filtek Z 350 flowable resin)을 접착하였다. 각 군의 미세전단 결합강도를 측정한 후 주사전자현미경하에서 파절양상을 비교하였다. 결과: 1. SB 군의 결합강도는 다른 모든 군보다 통계학적으로 높게 나타났고, GB 군의 결합강도는 다른 모든 군의 결합강도 보다 통계학적으로 낮게 나타났다(p < 0.05). 2. OS 군과 SE 군 및 AP 군의 결합강도는 SB 군보다 낮게 나타났지만, TY 군과 GB 군보다 통계학적으로 높게 나타났다(p < 0.05). 3. TY 군의 결합강도는 GB 군보다 통계학적으로 높게 나타났다(p < 0.05). 4. 접착성 파절은 TY 군과 GB 군에서 가장 많이 나타났고, 혼합파절은 SB 군과 SE 군에서 가장 많이 나타났으며, 응집성 파절은 OS 군, SB 군, SE 군 및 AP 군에서 각각 1개씩 나타났다. 결론: 접착 단계가 같은 접착시스템이라 해도 법랑질에 대한 유동성 레진의 미세전단 결합강도는 서로 다르게 나타났다.
Purpose - The objective of this study is to verify whether there are differences between Korean and Chinese consumers in the importance of the attributes such as shopping value and loyalty in social commerce. With the purpose of finding out these differences, the following questions are set up as research questions. First, will there be a difference between Korea and China in the importance of attributes of social commerce? Second, will there be a difference between Korean and Chinese consumers in shopping value? Third, will there be a difference between Korean and Chinese consumers in their loyalty? Research design, data, and methodology - The researchers collected data through self-administered questionnaires from Korean and Chinese consumers who had used social commerce within the past six months before answering the questionnaire. First, for social commerce users in Korea, comprising male and female university students in Chungcheong, a questionnaire was circulated. For social commerce users in China, university students within Beijing were surveyed. Responses to 336 questionnaires were used, excluding those with no answers or unreliable answers. Data coding and data cleaning were used. SPSS 18.0 was used. First, exploratory factor analysis is done to verify the validity of testing tools, and Cronbach's α coefficient is used to verify credibility. For factor analysis, the Varimax method is used. To verify the internal consistency reliability of each factor, the Cronbach's α coefficient is used to verify the credibility. Second, a T-test is done to verify differences between Korean and Chinese consumers for the importance of attributes. Third, ANOVA (Analysis of variance) is done to verify differences between Korean and Chinese consumers in shopping value and loyalty. Results - When Korean and Chinese consumers use social commerce, first, the importance of the attributes of social commerce is affected by four factors; playfulness and economic factors are more important to Korean consumers than Chinese consumers. As for informativeness factors, including product information and quality, and buyer comments, there was no confirmed difference between Korean and Chinese consumers. The convenience factor is more important to Chinese consumers than Korean consumers. Second, the factors affecting shopping value for Korean and Chinese consumers were hedonic shopping value and rational shopping value. To see the difference between Korean and Chinese consumers in shopping value factors, a t-test is conducted. As a result, in the rational shopping value factors of social commerce, Korean consumers scored higher than did Chinese consumers. These results were verified to be meaningful through statistics. In the hedonic shopping value factor of social commerce, Korean consumers scored higher than Chinese consumers. These results showed a significant difference. Third, loyalty in social commerce is higher for Chinese consumers than for Korean consumers. However, there is no difference in loyalty depending on sex. Conclusions - These results will hopefully be valuable and used in the future by Korean companies that wish to enter the Chinese social commerce market.
Purpose - The objective of this study is to verify whether there are differences between Korean and Chinese consumers in the importance of the attributes such as shopping value and loyalty in social commerce. With the purpose of finding out these differences, the following questions are set up as research questions. First, will there be a difference between Korea and China in the importance of attributes of social commerce? Second, will there be a difference between Korean and Chinese consumers in shopping value? Third, will there be a difference between Korean and Chinese consumers in their loyalty? Research design, data, and methodology - The researchers collected data through self-administered questionnaires from Korean and Chinese consumers who had used social commerce within the past six months before answering the questionnaire. First, for social commerce users in Korea, comprising male and female university students in Chungcheong, a questionnaire was circulated. For social commerce users in China, university students within Beijing were surveyed. Responses to 336 questionnaires were used, excluding those with no answers or unreliable answers. Data coding and data cleaning were used. SPSS 18.0 was used. First, exploratory factor analysis is done to verify the validity of testing tools, and Cronbach's α coefficient is used to verify credibility. For factor analysis, the Varimax method is used. To verify the internal consistency reliability of each factor, the Cronbach's α coefficient is used to verify the credibility. Second, a T-test is done to verify differences between Korean and Chinese consumers for the importance of attributes. Third, ANOVA (Analysis of variance) is done to verify differences between Korean and Chinese consumers in shopping value and loyalty. Results - When Korean and Chinese consumers use social commerce, first, the importance of the attributes of social commerce is affected by four factors; playfulness and economic factors are more important to Korean consumers than Chinese consumers. As for informativeness factors, including product information and quality, and buyer comments, there was no confirmed difference between Korean and Chinese consumers. The convenience factor is more important to Chinese consumers than Korean consumers. Second, the factors affecting shopping value for Korean and Chinese consumers were hedonic shopping value and rational shopping value. To see the difference between Korean and Chinese consumers in shopping value factors, a t-test is conducted. As a result, in the rational shopping value factors of social commerce, Korean consumers scored higher than did Chinese consumers. These results were verified to be meaningful through statistics. In the hedonic shopping value factor of social commerce, Korean consumers scored higher than Chinese consumers. These results showed a significant difference. Third, loyalty in social commerce is higher for Chinese consumers than for Korean consumers. However, there is no difference in loyalty depending on sex. Conclusion - These results will hopefully be valuable and used in the future by Korean companies that wish to enter the Chinese social commerce market.
'2016 DAVOS 세계경제포럼에서 Klaus Schwab이 "4차 산업혁명"을 처음으로 언급한 이래, 기존 산업이 ICT와 접목하여 새로운 신산업을 창출해내는 현상들이 국내외에서 뜨겁게 논의되고 있다. 4차 산업혁명은 다른말로 'Indutsrie 4.0'으로 표현되기도 한다. 자동차 산업도 마찬가지의 방향으로 진화하고 있다. 자동차가 세상에 나타난 이래 자동차 관련 기술은끊임없이 진화해오고 있는데, 독일 정부가 표방하듯 Industry 4.0 시대의자동차는 운전보조기능의 단계를 넘어 인공지능(AI)을 탑재하여 동적 주행성능의 대부분을 사람 운전자가 아닌 시스템이 관장하는 완전자율주행의 단계로 발전할 것으로 예상된다. 각국은 나름대로의 방식과 체계로 주행자동화(driving automation) 기술을 발전시켜나가고 있다. 현행 자동차관리법령상 '자율주행자동차' 개념은 다양한 단계의 자동화 자동차를 모두담아낼 수 없는 문제점이 있으므로 '자동화 자동차'로 개념설정을 변경하는 것이 타당하다. 아울러 자동화 자동차의 임시운행허가권의 소재도 국토교통부장관이 독점하는 것 보다는 시 도지사에게도 개방하여 지방화시대에 부합한 본래의 자동차 규제제도로 회귀하는 것이 필요하다고 생각한다. 또한 향후 자동화 자동차가 레벨3 이상의 단계로 진화하여 상용화하는 단계에서는 자동차안전기준도 독자적으로 마련되어야 할 것인바, 현행 임시운행허가시의 안전운행요건을 참조하여 레벨3 이상의 자동화자동차를 등록할 때 갖추어야 하는 안전기준을 정립하여 운용하여야 할것이다. 그밖에 레벨3 이상의 단계에서 시스템우선모드에서 운행되는 자동화 자동차라고 하더라도 그 운전자나 승객은 유사시에 운전개입을 하여 운행지배를 하여야 하기 때문에 기본적으로 운전면허의 소지자일 것을 요한다고 본다. 기타 자동화 자동차가 원활하게 운행되기 위해 필요한정보보호체계의 마련과 인공지능법제의 완비 및 자동화기술의 표준화 등은 향후 지속적으로 자동화 자동차 관련 기술이 발전함에 있어서 병행하여 정비하여야 할 중요한 법제영역이다.
토목구조물의 교면은 토목구조물 상부에 방수층이 존재하고 방수층 상부에 아스콘이나 콘크리트로 포장층을 마무리하여 교면의 시공을 완성하고 있다. 그러나 아스팔트계열은 뛰어난 감온성으로 고온에서 용융되는 취약한 특성을 지녔고, 이는 아스콘 포설시 고온으로 인하여 방수재가 용융되어 두께저하로 인한 하자 발생률이 증가하게 된다. 본 연구에서는 교면에 적용되는 MMA(Methyl Methacrylate)의 경질 Type과 연질 Type에 대하여 동시 사용시 배합에 따른 경화상태를 확인하고 각각의 인장강도와 신장률이 관련 품질기준에 대한 성능 만족 여부와 적정 배합비율을 확인해 보고자 한다. 그 결과 MMA 경질 수지 또는 연질 수지를 단독으로 사용하게 될 경우 경질 수지는 인장특성을 연질 수지는 신장특성이 명확하게 나타나기 때문에 수지의 단독 사용으로는 KS F 4932의 인장성능 품질기준을 만족시키지 못하는 것으로 나타났고, 파우더 양이 총 배합량 중 56.25%를 초과하게 될 경우에는 경화 후 표면에 공극이 발생되고 셀프 레벨링이 불가능하여 불균질한 표면을 형성하는 것으로 확인되었다. 또한, 경질 수지: 연질 수지: 파우더 비율을 15g: 85g: 150g으로 설정한 시험편은 인장강도 $1.5N/mm^2$, 신장률 133%가 나타남에 따라 KS F 4932의 인장성능을 만족하는 것으로 확인되었다.
최근 현장검사장치의 소형화 및 디지털화가 급격히 빠르게 진화하고 있다. 뇨검사는 일반인이 요시험지인 딥스틱을 이용하여 시각적인 색비교를 통해 자가진단이 가능하기에 색인지 기술에 대한 연구가 많이 이루어지고 있다. 본 연구는 요시험지검사에 사용되는 딥스틱(Dipstick Pad)의 색 변화를 스마트폰 카메라를 이용하여 얻어진 이미지로부터 RGB 값을 분석하였다. 비교 대상은 가장 많이 검사하는 질환으로 당뇨 증상과 관련 있는 요소인 당, 케톤체, pH의 양적변화에 대한 뇨 색 변화를 관찰하였다. 본 실험에서 일반적인 조도의 영향을 기준으로 밝은 조도와 어두운 조도 조건에서 뇨시험지상의 색변화에서 추출된 RGB값의 변화를 관찰하였다. 결과적으로 밝은 조도 조건에서의 색상 추출값이 높고 농도에 따른 반영이 잘 이루어지는 반면 낮은 조도 영역에는 색상 추출값이 낮게 나타났다. 따라서, 색 분리 알고리즘의 문제점을 개선하고자 RGB 수치의 변화값을 제시하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.