• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.464-474
• /
• 1996

A principal advantage of a plastic tooth over a porcelain tooth should be its ability to bond to the denture base material. But plastic teeth could craze and wear easily, so more abrasion resistant plastic denture teeth have been developed. To resist abrasion, the degree of cross-linking was increased, but bonding to denture base meterial became more difficult. The purpose of this study was to evaluate the bond strength of plastic teeth and abrasion resistant teeth bonded to heat-curing, self-curing and light-curing denture base material. Denture tooth molds were chosen that had a>8mm diameter. The denture teeth was bonded to three denture base materials and then machined to the same dimensions. Three denture base materials were used as control groups. Prior to tensile testing, the specimens were thermocycled between $5^{\circ}C\;and\;55^{\circ}C$ for 1000cycles. Tensile testing was performed on an Instron Universal testing mechine. Experimental group ; plastic teeth(Justi Imperial)+heat-curing resin(Lucitone 199) plastic teeth(Justi Imperial)+light-curing resin(Triad) plastic teeth(Justi Imperial)+self-curing resin(Vertex SC) abrasion resistant teeth(IPN)+heat-curing resin(Lucitone 199) abrasion resistant teeth(IPN)+light-curing resin(Triad) abrasion resistant teeth(IPN)+self-curing resin(Vertex SC) Control group ; heat-curing resin(Lucitone 199) light-curing resin (Triad) self-curing resin(Vertex SC). The results were as follows : 1. The denture teeth bonded to heat-curing resin showed the cohesive failure and those bonded to the other resins showed adhesive failure. 2. Tensile bond strength of the plastic teeth bonded to self-curing resin was not significantly greater than bonded to light-curing resin(p>0.05). 3. Tensile bond strength of the abrasion resistant teeth bonded to self-curing resin was not significantly greater than bonded to light-curing resin(p>0.05). 4. Tensile bond strength of the plastic teeth to self-curing resin was not significantly different from that of the abrasion-resistant teeth(p>0.05). 5. Tensile bond strength of the plastic teeth to light-curing resin was significantly greater than that of the abrasion resistant teeth(p<0.01).

• Research in Community and Public Health Nursing
• /
• v.11 no.2
• /
• pp.321-332
• /
• 2000

The purpose of this study was to test the hypothetical model designed to explain nursing students' perceived stress, coping levels, and stress outcomes. This hypothetical model was based on the Kim. Jung Hee(l987)' s stress model and stress-related literature. Exogenous variables were self-efficacy. hardiness. social support. and exercise. Endogenous variables were stress perception. coping levels. and stress outcomes. Empirical data for testing the hypothetical model consisted of 205 nursing students. SAS PC Program and LISREL 8.12a program were used for descriptive statistics and linear structural relationship(LISREL) modeling. The results were as follows. 1) The overall fit of the hypothetical model to the data was good( $x^2$=78.41(p=0.010), $x^2$/ df=1.50. RMSEA=0.05, standardized RMR= 0.05, GFI=0.95, AGFI=0.91, NNFI=0.90, NFI=0.94). 2) The results of statistical testing of the hypotheses were as follows. (1) As expected. self-efficacy had a significant effect on stress perception. But. hardiness. social support, and exercise did not have a significant effect on stress perception. Self-efficacy, hardiness. social support, and exercise explained 12% of the total variance of stress perception. (2) As expected, self-efficacy, hardiness, social support, exercise, and stress perception had a significant effect on coping behavior, Self-efficacy, hardiness, social support, exercise, and stress perception explained 53% of the total variance of coping behavior. (3) As expected, stress perception and coping behavior had a significant effect on stress outcomes. Stress perception and coping behavior explained 84% of the total variance of stress outcomes. In conclusion, the hypothetical model of this study was confirmed in explaining and predicting stress perception, coping levels, and stress outcomes in nursing students. And these findings suggest the need to develop nursing intervention to enhance self-efficacy, hardiness, social support, and exercise to decrease the harmful outcomes of stress.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.1
• /
• pp.7-13
• /
• 2001

As the density of VLSI increases, the conventional logic testing is not sufficient to completely detect the new faults generated in design and fabrication processing. Recently. IDDQ testing becomes very attractive since it can overcome the limitations of logic testing. This paper presents a new BIC for the internal current test in CMOS logic circuit. Our circuit is composed of Magnetoresistive current sensor, level shifter, comparator, reference voltage circuit and a circuit be IDDQ tested as a kind of self-testing fashion by using the proposed BIC.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.6
• /
• pp.635-641
• /
• 2011

In ultrasonic testing of dissimilar metal welds, application of phased array technique in terms of incident beam focusing is not easy because of complicated material structures formed during the multi-pass welding process. Time reversal(TR) techniques can overcome some limitations of phased array since they are self-focusing that does not depend on the geometrical and physical properties of testing components. In this paper, we test the possibility of TR focusing on a defect within anisotropic, heterogeneous austenitic welds. A commercial simulation software is employed for TR focusing and imaging of a side-drilled hole. The performance of time reversed adaptive focal law is compared with those of calculated focal laws for both anisotropic and isotropic welds.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.6
• /
• pp.923-929
• /
• 2001

Steering system is most important for vehicle in safety and driving feel. However, testing using real car to improve steering feel is often difficult in aspect to repeatability, safety and money. Repeatability in testing steering system is very important because steering feel for driver is variable according to the environment condition. And steering testing of vehicle is so dangerous that driver may not concentrate in testing. In this paper, the steering system simulator using front part of steering and suspension system was developed. We can test the electric power steering system for the light weight vehicle using this simulator cheap, safely and repeatably.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1069-1072
• /
• 1998

Recently the development of design and automation technology and manufacturing method, has reduced the cost of chip, but it becomes more difficult to test IC chip because test technique doesn't keep up with these techniques. In case of IC testing, obtaining test vectors to be able to detect good chip or bad one is very important, but according to increasing complexity, it is very complex and difficult. Another problem is that during testing, there could be capability of physical and electrical damage on chip. Also there is difficulty in synchronization between CUT (circuit under test) and Test equipment〔1〕. Because of these difficulties, built in self test has been proposed. Not only obtaining test vectors but also reducing test time becomes hot issues nowadays. This paper presents a new test BIST(built in self test) method. Proposed BIST implementation reduces test time and obtains high fault coverage. By searching internal nodes in which are inserted test_point_cells〔2〕and allocating TPG(test pattern generation) stages, test length becomes much shorter.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.8
• /
• pp.10-22
• /
• 1998

To handle the density increase of SRAMs, a new parallel testing methodology based on built-in self test (BIST) is developed, which allows to access multiple cells simultaneously. The main idea is that a march algorithm is dperformed concurently in each baisc marching block hwich makes up whole memory cell array. The new parallel access method is very efficient in speed and reuqires a very thny hardware overhead for BIST circuitry. Results show that the fault coverage of the applied march algorithm can be achieved with a lower complexity order. This new paralle testing algorithm tests an .root.n *.root.n SRAM which consists of .root.k * .root.k basic marching blocks in O(5*.root.k*(.root.k+.root.k)) test sequence.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.1
• /
• pp.141-151
• /
• 2020

This research aimed at studying the role of self-enhancing imagery and self goal-achievement emotion in the effect of characteristics perceived at advertisements using multisensory cues on purchase intention. Sports shoes advertisement was selected as an empirical research object. Questionnaire survey method was used to collect data. 'WenJuanXing' site was used to make the questionnaire in Chinese, and it was loaded on WeChat and QQ. 260 participants from different regions of China participated in online questionnaire survey. The results of testing the hypotheses by structural equation model in Amos 21.0 program are summarized as followings. The congruency between multisensory cues and self-discrepancy awareness positively evoked the self-enhancing imagery and the self goal-achievement emotion. The object relevance between the consumer and the product advertised did not induce the emotion, but evoked the self-enhancing imagery. Both of the self-enhancing imagery and the self goal-achievement emotion had positive effects on the product purchase intention. When developing advertisement, marketers should focus on multisensory cues' characteristics to enhance the self-enhancing imageries as well as to help feel the goal-achievement emotion. They should pay attention to the ways by which the multisensory cues' characteristics used to develop advertisement can be perceived to be congruent with each other by consumers.

• Research in Community and Public Health Nursing
• /
• v.17 no.4
• /
• pp.573-582
• /
• 2006

Purpose: To find out whether the self-care ability measurement used for visiting health care provide an appropriate standard to select service methods using a Delphi survey and to offer basic data that can improve the measurement. Method: A Delphi survey was done with 39 people consisting of theoretical professionals, field managers, and practitioners engaged in visiting health care. Result: It was found that items and weighted points in the currently used self-care ability measurement needed adjustment. Therefore, a modified evaluation standard was presented by domains, items and detailed items. Finally, the self-care ability measurement is composed of 4 domains, 11 items and 19 detailed items. Conclusion: This study is significant in that it presented an evaluation standard applicable directly to business practice by supplementing problems in the existing self-care ability measurement. This study suggests the need to develop various measurements for elderly households based on community.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.211-218
• /
• 2018

The purpose of the present study was to test the impact of depression on mobile phone dependency among elementary school students, to test the mediating effect of self-esteem between depression and mobile phone dependency, and to draw out theoretical and practical implications in terms of preventing or reducing mobile phone dependency. Based on previous studies, a longitudinal research model between the aforementioned three variables has been identified. The present study analyzed the 4th, 5th, and 6th wave data from Korea Children and Youth Panel Study 2010 (KCYPS 2010). The major results were as follows. First, depression could have a significant negative effect on self-esteem. Second, self-esteem could have a significant negative effect on mobile phone dependency. Third, the influence of depression on mobile phone dependency was not significant. Fourth, gender could be a significant moderating variable between depression and self-esteem. Finally, a number of implications of these findings were also discussed.