• 대한전자공학회논문지SD
• /
• 제43권6호
• /
• pp.30-37
• /
• 2006

본 논문은 테스트 수행 중 발생하는 전력 소모를 줄이기 위한 변경된 스캔 셀 구조를 제안하고 있다. 이는 스캔 이동 중에 조합 회로 부분에서 발생하는 천이를 억제할 뿐 아니라 동시에 스캔 체인 내에서 발생하는 천이도 감소시킨다. 뿐만 아니라 캡쳐 싸이클에서 발생하는 천이 또한 제한시킨다. 제안하는 방식은 test-per-scan BIST 구조에 적합하고 싱글 스캔 구조 뿐 아니라 멀티 스캔 구조에도 적응 가능하다. 실험 결과는 제안하는 방법이 기존의 방법들과 비슷한 수준의 고장 검출율을 가지면서 보다 적은 전력을 소모한다는 것을 보여준다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.19-22
• /
• 2004

The resonant planar transformer, which had power capacity of 300 W, input voltage of 220 V, output voltage of 15 V, and switching frequency of 500 kHz, was designed and manufactured by using the planar core with large effective area and the flat copper lead frames for miniaturization and high efficiency of the switching mode power supply (SMPS). As well as, a resonant converter equipped with the above mentioned planar transformer was manufactured and electromagnetic characteristics were investigated. The numerical value of turns for 1st and 2nd winding were 12 and 2 respectively. The self inductance of 1st winding was 33.2 ${\mu}H$, very low leakage inductance of 1.27 ${\mu}H$, and the coupling factor of 0.98 were obtained at switching frequency of 300 kHz. The high efficiency of 88.21 % for the SMPS equipped with planar transformer was obtained at power capacity of 300 W.

• 전력전자학회논문지
• /
• 제15권1호
• /
• pp.1-8
• /
• 2010

본 논문은 별도의 PWM-IC없이 저가 구현이 가능한 자려 발진 플라이백 컨버터의 대기전력 저감을 위한 회로를 제안한다. 제안된 자려발진 플라이백 컨버터는 기존 자려발진 플라이백 컨버터의 스위치 초기 동작을 위한 경로에서 발생하는 지속적인 전력손실 문제를 개선하기 위해 DC-Blocking 캐패시터를 삽입한 형태로써 약 1W의 대기전력 저감효과 및 시스템의 전력 변환 효율 향상이 가능하다. 본 논문에서는 제안된 회로의 동작원리를 설명하고, 실제 35W급 전원시스템을 구현하여 기존 회로와의 비교를 통해 제안된 회로의 타당성을 검증한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2016-2019
• /
• 1997

To solve the low efficiency problem of low-voltage power supplies, it has been studied to replace the schottky barrier diode with the MOSFET synchronous rectifier. In this paper, Phase Shift-Controlled Clamp Mode Zero Voltage Switching-Multi Resonant Converter with Synchronous Rectifier (PSC CM ZVS-MRC with SR) is presented to achieve high efficiency in low-voltage power supplies. The characteristics analysis of synchronous rectifier is established by using the MOSFET equivalent circuit and efficiency comparison is established between the Synchronous Rectifier and the schottky barrier diode. To verify the validity of the analysis, 33W(3.3V, 10A) PSC CM ZVS-MRC with self-driven synchronous rectifier at switching frequency of 1MHz is designed and tested. And it is confirmed that the experimental results are well consistent with the theoretical results. The maximum efficiency of the converter is 83.4% at full load, which is 3.3% higher than conventional schottky diode rectification.

• Journal of information and communication convergence engineering
• /
• 제9권5호
• /
• pp.551-555
• /
• 2011

Optical packet switching is a promising technology, which can integrate both data and optical network. In this paper, we present a comparative study of various traffic arrival approaches in WDM packet switches. The comparison is made based on packet loss rate and average delay under uniform and self-similar Pareto traffic. Computer simulations are performed in order to obtain the switch performance metrics. Study shows that burstiness of data traffic has a strong negative impact in the performance of WDM packet switches.

• Journal of Information Display
• /
• 제10권4호
• /
• pp.184-187
• /
• 2009

A liquid crystal device with switchable dynamic and memory modes was investigated and developed. The proposed device reveals the splay, $\pi$-twist, and bend states via selective switching among them. In the dynamic mode, the device is operated in the bend state, which exhibits a wide viewing-angle and a fast-response-time due to its self-compensated bend structure and flow-accelerated fast response time, respectively. In the memory mode, the permanent memory characteristics in the splay and $\pi$-twist sates are obtained, respectively. The switching mechanisms of the tristate device are also proposed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1037-1038
• /
• 2006

CFL(Compact Fluorescent Lamp)는 기존에 사용되던 백열 램프를 바로 대치할 수 있고, 백열 전구에 비하여 광 효율이 우수하다는 장점으로 인해서 사용처가 점점 증가되고 있는 추세이다. 하지만 등기구가 가지는 공간적인 제약으로 인해서 EMI 필터와 PFC 회로를 내장할 수 없으며, 램프에서 발생한 열이 직접적으로 안정기 회로에 영향을 주어 안정기 내부 온도가 매우 높게 상승한다는 점으로 인해서 다양한 기능을 갖는 전용 ballast control IC를 사용할 수 없었다. 이러한 이유로 인해서 toroidal core를 이용한 자려식(self-excited) 동작 방법이 주로 이용되어왔다. 이러한 자려식 발진 방법은 설계하기가 까다롭기 때문에 램프 점등 전에 램프 필라멘트를 예열한 이후에 점등을 하는 rapid start 방법을 구현하기 어려웠다. 본 논문은 fairchild 반도체에서 만든 CFL 전용 ballast IC가 가지는 특성에 대해서 다루었다. IC 내부에 안정기 동작을 제어하기 위한 제어 부분과 두 개의 MOSFET를 내장하고 있어 안정기 구성에 필요한 공간을 최소화할 수 있고, 부하 상태를 검출하여 항상 Active ZVS 동작을 하도록 하는 기능을 내장하고 있어서 스위칭 손실을 최소화할 수 있다는 장점을 가지고 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.600-603
• /
• 2009

The liquid crystal device with switchable dynamic mode and memory mode has been investigated and developed. The proposed device reveals splay, ${\pi}$ twist and bend states by selective switching among them. In the dynamic mode, this device is operated in the bend state which exhibits the wide view angle and fast response time properties due to the self-compensated bend structure and flow accelerated fast response time. In the memory mode, the permanent memory characteristics in the splay and ${\pi}$ twist sates are obtained, respectively. The switching mechanisms of the tristate device are also proposed.

• Macromolecular Research
• /
• 제10권6호
• /
• pp.345-358
• /
• 2002

The electrical conductivity during vulcanization process was measured as a function of time for the system of TiC loaded styrene-butadiene rubber (SBR) composites. The phenomenon of negative and positive temperature coefficients of conductivity and its conduction mechanism were also studied for the SBR polymeric composites. The current-voltage characteristics of the polymeric composites were non-linear in high voltage and showed a switching effect. The effects of temperature on the thermal conductivity and effective dielectric constant were measured. The measured parameters were found to be dependent on TiC concentration. The electromagnetic wave shielding (EMS) of the SBR-TiC polymeric composite was also examined. The SBR filled with TiC could be expected to be promising novel smart polymeric composites for self-electrical heating, temperature sensor, time delay switching, and electro-magnetic wave shielding effectiveness.

• 한국정보시스템학회지:정보시스템연구
• /
• 제28권3호
• /
• pp.123-139
• /
• 2019

Purpose With the development of information and communication technologies. fintech industry is rapidly growing as a major financial service. Previous research literatures mainly focused on overall characteristics and technical aspects of fintech including security issues. Therefore, this study investigated the effect of individual features influencing the resistance of adopting a fintech service. Moreover, this paper included the guidelines in practical development of fintech mechanism. Design/methodology/approach For research purposes, this study developed research hypotheses in order to empirically examine the effect of the factors that might have a significant effect on the resistance of the wearable device. The empirical research was based on a survey which carried through 359 participants. Research hypotheses were evaluated via SPSS Statistics 21.0 and AMOS 19 statistical package program. Findings Results showed that self-efficacy and individual innovation had a significant effect on the technostress and switching cost. In addition, technostress, security and switching cost had a significant effect on the resistance of adopting a fintech service. However, more factors are needed to including in research model to generalize these results.