• 한국정보통신학회논문지
• /
• 제5권2호
• /
• pp.269-278
• /
• 2001

대부분의 전자계산실무 교과 학습 관련 사이트들이 Text 위주의 나열식 학습평가가 대부분이나 본 논문에서는 빠른 속도로 출현하는 새로운 응용 프로그램의 활용을 필요로 하는 상업학교의 전자계산실무 교과목에 적용되는 학습평가를 웹을 기반으로 하여 이론과 실습을 교실에서 교사와 학생이 같이 수업을 하는 것처럼 WWW에서 애니메이션 기법을 이용하여 텍스트와 시각적, 청각적 기능을 포함한 자기주도적인 학습과 이전의 선발이나 배치의 목적으로 사용하기 위해 학습 결과를 양적으로만 측정해 온 것을 개개인의 특성을 고려한 평가 방법인 수준별, 개별화된 질적 평가가 가능하도록 설계 및 구현하였다.

• Elastomers and Composites
• /
• 제55권2호
• /
• pp.88-94
• /
• 2020

Automobile industry, along with the automobile steering system, is rapidly changing and developing. The constant velocity joint transmits power to the wheels of vehicles without changing their angular velocity based on the movement of the steering wheel. Moreover, it controls their movement to act as a buffer. In order to prevent the excessive increase in temperature caused by the movement of vehicles, boots are attached to the constant velocity joint and lubricant is injected into the boots. The boots maintain the lubrication and protect the constant velocity joint from sand, water, and so on. As the wheels of the vehicle rotate, the boots are acted upon by forces such as bending, compression, and tension. Additionally, self-contact occurs to boots. Therefore, their durability deteriorates over time. To prevent this problem, polychloroprene rubber was initially used however, it was replaced by thermoplastic polyester elastomers due to their excellent fatigue durability. In this study, the structural analysis of boots was conducted. The results showed the deformation patterns of the boots based on the translation and rotation of the constant velocity joint. Moreover, it confirmed the location that was vulnerable to deformation. This study can be used to potentially design high-quality constant velocity joint boots.

• 한국통신학회논문지
• /
• 제24권8B호
• /
• pp.1490-1499
• /
• 1999

본 논문에서는 필기숫자의 형태와 FSOM을 이용한 새로운 필기숫자 인식 알고리즘을 제안한다. 제안한 알고리즘은 비슷한 형태를 가지는 숫자는 같은 그룹으로 분류된다는 사실에 기초한 알고리즘으로, 필기숫자의 외접선에 의한 형태결정과 템플레이트 매칭을 이용하여 필기숫자 데이터를 여러 개의 그룹으로 분할하고 분할된 각 그룹별로 인식 알고리즘을 적용한다. 본 실험에서는 필기숫자의 데이터를 16개의 그룹으로 분류하였으며, 분류된 그룹별로 각각의 특징추출과 SOM의 단점을 보완한 FSOM을 적용하였다. 분할된 16개의 FSOM은 각 그룹별로 독립적인 학습이 가능한 특징뿐만 아니라 한 그룹씩 단계적으로 학습을 할 수 있는 장점이 있다. 제안한 알고리즘의 성능을 입증하기 위해서 Concordia 대학의 필기 숫자 데이터를 사용하여 실험하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.152-153
• /
• 1994

A recessed $n^{+}$-p junction diode with the serf-aligned structure is proposed and fabricated by using the polysilicon as an $n^{+}$ diffusion source. The diode structure can be applicable to the emitter-base formation of high performance bipolar device and the $n^{+}$ polysilicon emitter has an important effect on the device characteristics. The considered parameters for the polysilicon formation are the deposition condition $As^{+}$ dose for the doping of the polysilicon, and the annealing using RTP system. The vertical depth profiles of the fabricated diode are obtained by SIMS. The eleotrical characteristics are analyzed in trims of the ideality factor of diode (n), contact resistance arid reverse leakage current. The $As_{+}$ dose for the formation of good junction is current. The $As^{+}$ dose for the formation of goodjunctions is about 1∼2${\times}$$10^{16}$$cm^{-2}$ at given RTA condition ($1100^{\circ}C$, 10 sec). The $n^{+}$-p structure is successfully applied to the self-aligned bipolar device adopting a single polysilicon technology.

• Applied Microscopy
• /
• 제44권4호
• /
• pp.111-116
• /
• 2014

This study investigates the developmental pattern of adhesive discs (ADs) to highlight the ontogeny and structural changes that occur during the growth of Boston ivy. Initiation to postmortem features of ADs were examined through light and scanning electron microscopy. The study also reveals a new finding of the dislocation of peripheral tissues of adaxial origin. Four phases of attachment are suggested with regards to its climbing behavior: 1) pre-attachment, 2) upon attachment, 3) after attachment, and 4) final attachment. During initiation, several ADs originate from tendril primordia without epidermal differentiation. However, different growth rates in the epidermis results in completely different ADs. ADs were discerned by size, shape, and color during expansion, but cells in the adaxial surface remained alive longer than the other side. Upon contact, the ADs demonstrate simultaneous growth and deterioration, but once attachment is established the latter process subdues to final stages. Epidermal transformation, adhesive secretion, cellular disruption, and mechanical stress were essential for the self-clinging nature of Boston ivy. The post-attachment sequence is also believed to be critical in achieving maximum mechanical strength to provide extensive support. The developmental process of ADs is prompted by tactile stimulation but in a highly organized and systematic manner.

• 한국항해학회지
• /
• 제21권4호
• /
• pp.103-116
• /
• 1997

This study was to assess Korean sailors' knowldege, attitudes and behaviors about AIDS. The subjects of this study were 379 safety-trainee sailors. Data were collected by self reporting on a questionnaire during February to March 1996. The results were as follows : The mean score on AIDS knowledge was 17.3 out of a possible maximum score of 24.0. With respect to diseas transmission , only 45.6-86.5percent of the sailors correctly indicated that causal contact does not lead to contraction AIDS. The younger, unmarried , and educated groups had a higher level of knowledge about AIDS. With respect t sailors' attitudes about ADIS, 85.2 percent of the sailors reported that the AIDS is as big a problem as the media suggested, and over half of the sailors(53.8%) reported that they are being afraid of getting AIDS. One attitude, which was most pervasive(903.1 percent agreeing) was that it is important for sailors to receive AIDS education as a part of social education classes. In attitudes , there was statistical significance by age group, marital statistical signifiacance by age group , marital status, and educational level. With respect to sailor's preventive behaviors about AIDS, the mean score was 7.1 out of a possible maximum score of 9.0. It was shown that the older age, married groups had a higher level of preventive behaviors about AIDS.

• 한국진공학회지
• /
• 제22권4호
• /
• pp.198-203
• /
• 2013

에너지 수확은 우리주변에 존재하는 버려지는 에너지를 유용한 전기에너지로 변환하는 기술이다. 마찰전기 소자는 접촉을 통한 정전기를 유도하는 원리로 동력학적 에너지를 전기에너지로 전환하는 소자이다. 본 연구에서는 소프트 식각 기술을 활용하여 제작 단계를 최소화한 마찰전기 에너지 수확소자를 개발하고, 그 전기적 특성을 측정하였다. 마찰전기를 통한 발전은 마이크로패턴을 통해 마이크로 거칠기를 가진 알루미늄 층과 PDMS 층 사이에서 발생한다. 이때 PDMS 층의 마이크로 패턴은 마스크리스 식각을 통해 만들어진 알루미늄 층의 마이크로 패턴을 소프트 식각법으로 바로 본뜨는 방식으로 제작되었다. 본 소자는 2 V와 20 nA의 발전 성능을 나타낸다.

• 통합자연과학논문집
• /
• 제6권4호
• /
• pp.215-219
• /
• 2013

In this study, in order to investigate how consecutive treatments of glass surface with HF acid and water vapor/Ar plasma affect the quality of 3-aminopropyltriethoxysilane self-assembled monolayer (APS-SAM), poly(3,4-ethylenedioxythiophene) (PEDOT) thin films were vapor phase-polymerized immediately after spin coating of FeCl3 and poly-urethane diol-mixed oxidant solution on the monolayer surfaces prepared at various treatment conditions. For the film characterization, various poweful tools were used, e.g., FE-SEM, an optical microscope, four point probe, and a contact angle analyzer. The characterization revealed that a well prepared APS-SAM on a glass surface treated with water vapor/Ar plasma is very useful for uniform coating of FeCl3 and DUDO mixed oxidant solution, regardless of HF treatment. On the other hand, a bare glass surface without APS-SAM but treated with HF and water vapor/Ar plasma generally led to a very poor oxidant film. As a result, PEDOT films vapor phase-polymerized on APS-SAM surfaces are far superior to those on bare glass surfaces in the quality and electrical characteristics aspects.

• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.325-331
• /
• 2018

Automobiles and systems requiring high gear ratios and high power densities generally use worm gears. In particular, as worm gears have a small volume and self-locking function, home appliances such as refrigerators and washers consist of worm gears. We can classify worm gears into cylindrical worms and rectangular worms. According to the AGMA standard, there are four types of cylindrical worms, ZA, ZN, ZK and ZI, depending on the machining of the worm shaft. It is preferable to use a ZI-type worm shaft, which is a combination of a worm wheel having an involute helical tooth surface and a conjugate tooth surface. However, in many cases, industries mostly use ZK, ZN, and ZA worm shafts because of the ease of processing. This paper presents numerical approaches to produce ZI and ZA worm surfaces and worm wheel. For the analysis of the transmission error of a worm gear system, this study (1) generates surface profile functions of ZI profile worm gear and worm shaft based on the common rack theory, (2) adopts the Newton-Raphson method for the analysis of the gear surface contact condition, and (3) presents and compares the corresponding transmission errors of ZI and ZA worm gears.

• 한국표면공학회지
• /
• 제52권2호
• /
• pp.96-102
• /
• 2019

Magnesium and its alloys are prone to be corroded, thus surface treatments improving corrosion resistance are always required for practical applications. As a surface treatment of magnesium alloys, plasma electrolytic oxidation (PEO), creating porous stable oxide layer by a high voltage discharge in electrolyte, enhances the corrosion resistance. However, due to superhydrophilicity of the porous oxide layer, which easily allow the penetration of corrosive media toward magnesium alloys substrate, post-treatments inhibiting the transfer of corrosive media in porous oxide layer are required. In this work, we employed a hydrophobizing method to enhance the corrosion resistance of PEO treated Mg alloy. Three types of hydrophobizing techniques were used for PEO layer. Thin Teflon coating with solvent evaporation, self-assembled monolayer (SAM) coating of octadecyltrichlorosilane (OTS) based on solution method and SAM coating of perfluorodecyltrichlorosilane (FDTS) based on vacuum method significantly enhances corrosion resistance of PEO treated Mg alloy with reducing the contact of water on the surface. In particular, the vacuum based FDTS coating on PEO layer shows the most effective hydrophobicity with the highest corrosion resistance.