• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.453-465
• /
• 2019

Purpose: A main purpose is to increase the operational rate and reduce operating maintenance costs by Improving the durability of Blower of Military Armored Vehicle and Self-propelled Artillery. As a result, it is expected to improve the service quality of customers. Methods: After analyzing the cause of the stop of the blower, the improvement plans were established and the effectiveness of each improvement plans were verified by testing. Results: Mechanical, electrical and environmental factors affecting brush wear were reviewed, but it was difficult to specify the cause, which necessitated a review of the application of the BLDC motor. Conclusion: After applying the BLDC motor to the blower, tests proved that the existing blower can be replaced. It is expected that this study will help improve the durability life of similar equipment that is applied with Brushed DC motors as well as blowers.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.141-143
• /
• 2008

Due to the demand for high-output motors in the limited space between the wheels in an electric train, self-ventilating traction motors have been used for many years. periodical disassembly maintenance is necessary to remove the small quantities of dust that enter the motor from the open-air ventilation. Reducing this burden, as well as increasing efficiency and reducing noise, would benefit the next generation of moters To address these needs, KRRI is developing a fully enclosed type traction motor, a fully enclosed type traction motor with outer fans, a high-efficiency permanent-magnet synchronous motor and a direct-drive motor(DDM) as traction motors for the next generation of trains.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.8
• /
• pp.514-521
• /
• 2000

This paper presents a direct thrust control scheme for permanent magnet linear synchronous motor(PMLSM) by using digital signal processor(DSP). And a simulation method for the direct thrust control of a permanent magnet linear synchronous motor using the equivalent circuit is presented. The detent force that was obtained by cubic spline method is considered in the simulation. Thrust correction coefficient is utilized to estimate actual thrust on the direct thrust control, which considers the longitudinal end effect due to the finite core length of the permanent magnet linear synchronous motor. The motor self inductance, the initial flux linkage by the permanent magnet is calculated in advance by the finite element analysis, and then the direct control simulation is carried out. As the results, thrust, current and speed are shwon.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.2
• /
• pp.55-64
• /
• 1990

This paper concerned about a study on the direct pole placement PID self-tuning controller design for DC servo motor control system. The method of a direct pole placement self-tuning PID control for a DC servo motor of Robot manipulator tracks a reference velocity in spite of the parameters uncertainties in nonminimum phase system. In this scheme, the parameters of classical controller are estimated by the recursive least square (RLS)identification algorithm, the pole placement method and diophantine equation. A series of simulation in which minimum phase system and nonminimum phase system are subjected to a pattern of system parameter changes is presented to show some of the features of the proposed control algorithm. The proposed control algorithm which shown are effective for the practical application, and experiments of DC servo motor speed control for Robot manipulator by a microcomputer IBM-PC/AT are performed and the results are well suited.

• Journal of Korean Physical Therapy Science
• /
• v.28 no.1
• /
• pp.33-45
• /
• 2021

Background: Children with cerebral palsy have difficulty acquiring motor skills through motor learning due to lack of motor planning of the central nervous system and musculoskeletal dysfunction. Motor learning is the acquisition or modification of movements with the aim of developing skilled movements and behaviors. Cerebral palsy improve motor function through motor learning, and effective motor learning mainly depends on practice parameters such as learning feedback. Therefore, we investigate the effect of motor learning in children with cerebral palsy and try to present the possibility of clinical application. Design: A systemic review. Methods: Research papers were published from Jan, 2010 to Dec, 2020 and were searched using PubMed and Medline. The search terms are 'task specific training' OR 'motor learning' OR 'feedback(Mesh term)' OR 'goal activity' AND 'cerebral palsy(Mesh term)'. A total of eight papers were analyzed in this study. The paper presented the quality level based on the research evidence, and also presented PEDro (Physiotherapy Evidence Database) scores to evaluate the quality of design studies in randomized clinical trials. Results: The results showed that motor learning coaching in children with cerebral palsy improved motor function in post and follow up tests. Also, self-control feedback of motor learning is more effective than external control feedback. 100% external control feedback of motor learning is effective in the acquisition phase and 50% external feedback of motor learning is effective in the retain phase. Conclusion: These results suggest that it will be an important data for establishing evidence on the effect of motor learning arbitration methods in children with cerebral palsy to develop clinical applicability and protocols.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.2
• /
• pp.190-196
• /
• 2007

This paper presents the 3D finite element analysis of the Contact-less Power Supply(CPS) with linear servo motor. The primary, secondary self and leakage inductances of the contact-less power supply and the capacitances of a resonant circuit are calculated by the finite element analysis using current source. The voltage source is used to do accurate analysis of the characteristics of the contact-less power supply. The CPS with the linear servo motor is proposed. The characteristics analysis of the contact-less power supply considering the linear servo motor is done.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.101-109
• /
• 2008

Induction motor needs reactive power to sustain the electromagnetic field required for rotating. If reactive power is provided by the load side instead of the source side, power factor will be increased. Power factor of induction motor is usually low and needs to be compensated with power capacitor. In domestic regulations, Capacitor capacity for the power factor correction of induction motor should be complied with the recommended value by the motor output. But, at the same output, characteristics of induction motor is different from each other by the rotation speed and is not suitable for application of regular capacitor value regardless of motor's characteristics. In this paper, we compared to each other with the existing value and new proposed value with rotation speed under the same output condition, confirmed that power capacitor capacity is needed to upgrade for the better power factor.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.418-425
• /
• 1998

In this paper. determination method of turn-off angle in the SRM drives is proposed to maintain the high torque at a any turn-on angle, which is realized by using selHuning control method, During the sampling time. a number of P pulses from encoder are checked by using one-chip microprocessor. and compared with pre-checked a number of pulses A After calculating difference between two data, the turn-off angle moves forward or backward direction by the self-tuning m method, As repeating such process, the optimal turn-off angle is determined and the maximum torque is maintained T Though experiments, it is observed that motor speed is almost maintained if turn-off angle is adjusted automatically by s selHuning method when turn-ηn angle is changed.

• Composites Research
• /
• v.28 no.4
• /
• pp.197-203
• /
• 2015

Tensile properties of polypropylene based self-reinforced composites were investigated as a function of process variables of the double-belt lamination equipment such as pressure, temperature and cooling conditions. Elastic modulus was enhanced approximately 6 times from 0.2 to 1.2 GPa. The improvement mechanism was studied by identification of crystalline structure changes using DSC and XRD analysis. In addition, morphology change of self-reinforced composites was also investigated by SEM analysis in order to reveal the degree of impregnation.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.861-864
• /
• 2024

The self-driving roller conveyor system, which transports target products by controlling multiple rollers with a motor, is a logistics system suitable for branching and joining logistics and controlling the alignment of target products, and its utilization is increasing, especially in the food manufacturing process. In this paper, we build a simulation environment using Unity software based on 3D graphic modeling of a self-driving roller conveyor system. In a situation where target products are supplied irregularly in terms of time, a method is proposed that can align products to maintain constant spacing by controlling the rollers. Simulation results show that effective alignment of products is possible by controlling the motor that drives the roller based on sensor data of the product position.