• 한국결정성장학회지
• /
• 제19권1호
• /
• pp.6-10
• /
• 2009

본 논문에서는 혼합소스(mixed-source) HVPE(hydride vapor phase epitaxy)방법으로 선택성장(SAC: selective area growth) GaN/AlGaN 이종접합구조의 발광다이오드를 r-plane 사파이어 기판 위에 제작하였다. SAG-GaN/AlGaN DH(double heterostructure)는 고온 GaN 버퍼층, Te 도핑된 AlGaN n-클래딩층. Gan 활성층. Mg 도핑된 AlGaN p-클래딩층. Mg 도핑된 GaN p-캡층으로 구성되어있다. GaN/AlGaN 이종접합구조의 발광다이오드의 특성을 알아보기 위해 SEM을 통한 구조적 분석과 전류-전압 측정(I-V: current-voltage measurement), 전류-광출력(EL: electroluminescence) 측정을 통하여 전기적, 광학적 특성을 평가하였다.

• 한국진공학회지
• /
• 제4권3호
• /
• pp.275-282
• /
• 1995

III족 원료 가스로 triethylgallium(TEGa)과 trimethylindium(TMIn)을 사용하고 V족 원료 가스로 사전 열 분해하지 않은 arsine(AsH3)과 monoethylarsine(MEAs)을 사용하여 ultrahigh vacuum chemical vapor deposition(UHVCVD)법으로 Si3N4로 패턴된 GaAs(100)기판 위에 GaAs와 InGaAsqkr막을 선택적으로 에피택시 성장을 하였다. V족 원료 가스를 사전 열 분해하지 않으므로 넓은 성장 온도 구간과 V/lll 비율에서도 선택적으로 박막이 성장되었다. 또한 선택 에피택시의 성장 메카니즘을 규명하기 위하여 다양한 filling factor(전체면적중 opening된 면적의 비율)를 가지는 기판을 제작하여 성장에 사용하였다. UHVCVD법에서는 마스크에 면적중 opening된 면적의 비율)를 가지는 기판을 제작하여 성장에 사용하였다. UHVCVD법에서는 마스크에 입사된 분자 상태의 원료 기체가 탈착된 후 표면 이동이나 가스 상태의 확산과정 없이 마스크로부터 제거되므로 패턴의 크기와 모양에 따른 성장 속도의 변화나 조성의 변화가 없을 뿐만 아니라 chemical beam epitaxy(CBE)/metalorganic molecular beam epitaxy(MOMBE)법에서 알려진 한계 성장온도 이하에서 선택 에피택시 성장이 이루어졌다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.518-520
• /
• 1987

The semiconductor-metal-semiconductor structure is considered to be promising for high speed electronic devices. To realize this, the selective LPE and the proper design of epitaxial mask were adopted. Enhanced As diffusion made it possible to grow GaAs over W on GaAs. Buried W Schottky diode was fabricated and the rectifying I-Y characteristics were obtained.

• 한국재료학회지
• /
• 제14권6호
• /
• pp.399-401
• /
• 2004

InGaAs/GaAs quantum wire structures were grown by low pressure metalorganic chemical vapor deposition by using selective area epitaxy.$ In_{ 0.2}$$Ga_{0.8}$ As/GaAs quantum wire structures were grown on a $SiO_2$ masked GaAs substrate. Quantum wire structures with sharp tips and smooth side walls were grown. We have grown InGaAs/GaAs quantum wire structures using variously opened width of the $SiO _2$ mask. Even though the opening widths of $SiO_2$ masked GaAs substrate were different, similar shapes of triangular structures were grown. Using various kinds of differently opened $SiO_2$ masked area, it would be possible to grow quantum wire structures with various thicknesses. The quantum wire structures are formed near the pinnacle of the triangular structure. Therefore, the fabrication of the uniquely designed integrated optical devices which include light emitting sources of multiple wavelength is possible.

• 한국진공학회지
• /
• 제12권2호
• /
• pp.118-122
• /
• 2003

저압 MOCVD 장치를 이용하여 선택적 에피 성장 (selective area epitaxy) 기술을 개발하고, 이 기술을 이용하여 InGaAs/GaAs 양자세선(quantum wire) 구조를 성장하였다. $SiO_2$로 선택적으로 마스킹 된 GaAs 기판위에 AIGaAs/GaAs 다충 구조 및 InGaAs/GaAs 양자세선 구조를 저압 MOCVD 방법으로 성장하였다. 매끄러운 사면을 갖고 끝 부분이 뽀쪽한 삼각형 구조의 양자세선 구조가 선택적 에피 성장법에 의해 자발적으로 형성되었다. 선택적 에피층 성장을 위한 최적 조건을 알기 위해 먼저 GaAs/AlGaAs 다층구조에 대하여 여러 가지 성장변수들에 대하여 조사하였다. 성장 변수들은 성장률(growth rate), V/III 비 및 성장온도, 패턴의 정렬 방향 등이다. 양자세선에서 나오는 발광은 975 nm로 분석되었다. 측정 온도가 증가됨에 따라 삼각형 구조의 사면의 양자우물에서 나오는 발광은 급격하게 감소하였다. 그러나 양자세선에서 나오는 발광은 양자우물에서 나오는 발광에 비해 서서히 감소하였고, 50 K 이상의 온도에서는 양자세선에서 나오는 발광의 세기가 더 커졌다.

• 한국진공학회지
• /
• 제8권3A호
• /
• pp.207-212
• /
• 1999

Undoped InP epilayers with high purity were grown by using $In/PCl_3/H_2$ chloride vapor phase epitaxy. It was found that the growth of InP homoepitaxial layer is optimized at the growth temperature of $630^{\circ}C$ and at the $PCl_3$ molar fraction of $1.2\times10^{-2}$. The carrier concentration of InP epilayer was less than $10^{14} {cm}^{-3}$ from the low temperature (11K) photoluminescence measurement. Growth behavior of undoped InP current blocking layer on reactive ion-etched (RIE) mesas has been investigated for the realization of 1.55 $\mu \textrm m$buried-heterostructure laser diode (BH LD), using chloride vapor phase epitaxy. On the base of InP homoepitaxy, InP current blocking layers were grown at the growth temperatures ranging from $620^{\circ}C$ to $640^{\circ}C$. Almost planar grown surfaces without edge overgrowth were achieved as the growth temperature increased. It implied that higher temperature enhanced the surface diffusion of the growth species on the {111} B planes and suppressed edge overgrowth.

• 한국세라믹학회지
• /
• 제44권3호
• /
• pp.142-146
• /
• 2007

High-quality one-dimensional GaN nanorods and nanowires were synthesized on Ni-coated c-plan sapphire substrate using halide vapor-phase epitaxy (HVPE). Their structure and optical properties were investigated by X-ray diffraction, scanning and transmission electron microscopy, and photoluminescence techniques. Full substrate coverage of densely packed, uniform, straight and aligned one-dimensional GaN nanowires with a diameter of 80nm were grown at $700{\sim}900^{\circ}C$. The X-ray diffraction patterns, transmission electron microscopic image, and selective area electron diffraction patterns indicate that the one-dimensional GaN nanostructures are a pure single crystalline and preferentially oriented in the [001] direction. We observed high optical quality of GaN nanowires by photoluminescence analysis.

• 전자공학회논문지D
• /
• 제34D권9호
• /
• pp.64-71
• /
• 1997

A new etching technique of meltback was investigated for GaAs lensed optical devices with selective windows opending in the LPE (liquid phase epitaxy) system. In the meltback process, the etch depth and the etch shape were controlled by the degree of under-saturation, etch time and other parameters. A GaAs/AlGaAs DH layer was grown on the selectively etched hemispherical well for optical device application such as lensed surface emitting LED. The regrowth process were related with the coolin grate and the well to well spacing. A novel surface emitting LED with hemispherical AlGaAs lens was fabricated using the meltbakc and regrowth as the key process for AlaAs lens array. The light emitting efficiency of the LED was upto three times higher than the similar structure LED without lens. The meltback and regrowth technique was applicable to manufacture the optical device in LPE.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.471-475
• /
• 2000

P-type (100) Si wafer patterned with 1000$\AA$ SiO$_2$island was used as substrate and the Si films were deposited under low pressure using Si$_2$H$_{6}$-H$_2$gas mixture where the total gas flow rate and deposition pressure were 16.6sccm and 3.5mtorr, respectively. In this condition, we selectively obtained high-quality epitaxial Si layer of the 350~1050$\AA$ thickness. In order to extend the incubation period, we kept high pressure H$_2$ environment without Si$_2$H$_{6}$ gas for few minutes after first incubation period and then we conformed the existence of second incubation period.iod.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.174-175
• /
• 2005

Initial growth stage was investigated for SiC homoepitaxial film growth using 'step controlled epitaxy' technique. When the off angel direction is located parallel along to the gas flow direction, the smoother surface can be obtained. On the on axis substrates, selective etching was detected both the etching and growth condition. It was deduced that the high ratio of C/Si in the source gas results in well developed steps and etched spiral around micropipes.