• ETRI Journal
• /
• v.39 no.1
• /
• pp.69-75
• /
• 2017

This study presents a dual-band 3D frequency selective surface that provides a large degree of freedom in frequency and bandwidth adjustability. The proposed structure is evaluated in terms of its structural parameters, and prototypes are fabricated. The radius of the copper rings and the height of the cylinders are considered, and are shown through full-wave electromagnetic simulations to have a significant effect on the frequency characteristics of the frequency selective surface. The measurement results of the fabricated samples are compared with the simulation results, and a satisfactory agreement is obtained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.181-185
• /
• 1996

Rapid prototyping is becoming an increasingly importnat techniuqe involved in the design cycles of modern industry. The majority of the rapid prototyping systems currently available use photo-reactive resins and waxes as the raw materials. The models produced by these systems often have relatively poor mechanical and physical properties and as such have a limited application to the production of advance prototypes but are excellently suited to the manufacture of engineering prototyes. This work identifies the need to produed near production grade advance prototypes from a variety of metals and a novel prototyping process based on the techniques of selective laser sintering and conventional machining is proposed. The integration of a carbon dioxide laser and a conventional machine tool to create the opto-mechanical by multi-layer sintering and some of the problems involved are also discussed.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.8
• /
• pp.1127-1132
• /
• 2006

A new salicylate-selective electrode based on the complex N,N'-1,4-butylene bis(3-methyl salicylidene iminato) copper(II) as the membrane carrier was developed. The electrode exhibits a good Nernstian slope of 59.1 ${\pm}$ 1.0 mV/decade and a linear range of $1.0\;{\times}\;10^{-6}$-1.0 M for salicylate. The limit of detection was $5.0\;{\times}\;10^{-7}$ M. It has a fast response time 10 s and can be used for more than three months. The selective coefficients were determined by the fixed interference method (FIM) and could be used in the pH range 4.5-10.5. It was employed as an indicator electrode for direct determination of salicylate in pharmaceutical samples.

• English Language & Literature Teaching
• /
• v.17 no.4
• /
• pp.207-227
• /
• 2011

This paper investigates how two different modes of feedback (selective vs. comprehensive) affect selected students' writing development in terms of three different types of measurement (accuracy, fluency, and complexity). 139 university students participated in the study, and 278 writing samples were analyzed. The results of the study indicate that participants who received selective feedback wrote more accurately and fluently than their counterparts. However, in terms of complexity, both selective and comprehensive groups showed no sign of improvement in semester-based investigations. The results of this study support Skehan's (2009) theory of trade-off effects, suggesting that 'natural' tension exists between accuracy and complexity when resources are limited. Moreover, this finding contrasts with the theory of Cognition Hypothesis, which proposes that task complexity will be associated with increases in complexity and accuracy. In the study, selected participants (N=21) strongly nominated their error sources as unfamiliarity toward using key words, usage, transition, and sentence types. This study not only contributes to the accumulation of our current knowledge in the related area of theory, but offers educational implications for those who are dealing with intermediate-level students when deciding what particular teaching content should constitute a priority within a limited instructional period.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.239-242
• /
• 2003

Transmit diversity using STBC(Space Time Block Code) provides the same diversity gain as MRRC(Maximal Ratio Receiver Combining), when the fading channel is constant across two consecutive symbols. But, when the channel condition is changed for the two consecutive symbols, the transmit diversity using STBC does not offer good performance due to the large doppler shift. In this paper, we have proposed a interference cancellation scheme for performance enhancement in transmit diversity using STBC over time selective fading channel. Simulation results for various doppler shift rates are presented for the transmit diversity using the proposed scheme.

• Journal of electromagnetic engineering and science
• /
• v.6 no.4
• /
• pp.203-208
• /
• 2006

Channel estimation and data detection for OFDM systems over time- and frequency-selective channels are investigated. Relying on the complex exponential basis expansion channel model, a pilot-embedded channel estimation scheme with low computational complexity and spectral efficiency is proposed. A periodic pilot sequence is superimposed at a low power on information bearing sequence at the transmitter before modulation and transmission. The channel state information(CSI) can be estimated using the first-order statistics of the received data. In order to enhance the performance of channel estimation, we recover the transmitted data which can be exploited to estimate CSI iteratively. Simulation results show that the proposed method is suitable for doubly-selective channel estimation for the OFDM systems and the performance of the proposed method can be better than that of the Wiener filter method under some conditions. Through simulations, we also analyze the factors which can affect the system performances.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.899-904
• /
• 2012

In recent years, a lot of research was done for earth fault protection in ungrounded dc power supply system. As a result, selective-breaking integrated protective relaying system is developed in progress and is currently field-testing are planned. Algorithm on a PC using PSCAD done a lot of testing before performing field tests, but in this study developed algorithms and functions needed to determine whether they were operating normally. Therefore, simulated system is similar to the actual situation was required and made. selective-breaking algorithm verification and validation was performed with simulator.

• 한국무역상무학회:학술대회논문집
• /
• 2004.12a
• /
• pp.149-170
• /
• 2004

Arbitration is a creature of contract. The parties agree that selective dispute resolution clause provides them with a choice to litigate or arbitrate certain disputes. Under the agreements, the parties had the option in the action. In the event any dispute arises between the parties concerning our representation or payment of our fees and disbursements which cannot be promptly resolved to our mutual satisfaction, you agree that dispute will be submitted to arbitration. Arbitration is a matter of contract and a party cannot be required to submit to arbitration any dispute which he has not agreed so to submit. The selective arbitrations clauses are to be construed as broadly as possible, and arbitration will be compelled unless it may be said with positive assurance that arbitration clause is not susceptible of an interpretation that covers the asserted dispute.

• Laser Solutions
• /
• v.7 no.1
• /
• pp.37-47
• /
• 2004

Laser-assisted selective infiltration is a new method of building metal layers to make metal parts layer by layer, in which superheated microscopic metal droplets are infiltrated into a laser-preheated layer of microscopic metal powders. In this work, the selective infiltration of a low melting-point metal, Sn-37Pb wt%, was conducted to investigate the effects of such dominant parameters as superheating temperature, Nd:YAG laser power for preheating, substrate temperature, etc. The optimal conditions for successful selective infiltration of a single layer of microscopic metal powder were experimentally obtained

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.393-393
• /
• 2011

오늘 날 태양전지 산업에서 가장 많은 생산을 하고 있는 분야는 결정질 태양전지분야이다. 현재는 이러한 시대적 요구에 따라 많은 연구가 진행되고 있는데 특히 junction을 이루는 n layer의 doping profile을 선택적으로 형성하여 개방전압 및 단락전류를 향상시키는 연구가 활발히 진행되고 있다. 본 연구는 이러한 n type layer의 doping profile을 선택적으로 형성하는 selective emitter solar cell에 관한 연구로써 SILVACO simulation을 이용하여 low Rs 영역은 고정하고 high Rs 영역의 doping depth를 가변 함으로써 high Rs 영역을 달리 형성하는 방법으로 selective emitter solar cell의 high Rs영역의 최적화에 관한 전산모사를 실시하였다. 각각의 가변조건에 따라 quantum efficiency를 통한 광학적 분석과 I-V를 통한 전기적 분석을 하여 high Rs영역을 최적화 하였다.