• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.305-307
• /
• 2009

When we design the control system used Programmable Logic Controller(PLC), we program the main algorithm by Ladder Diagram(LD) among the standard language. We can substitute the select sequence function by the unique sequence. We can implement this function by the delay time. Therefore this thesis show the select sequence function by the unique sequence and we confirmed its feasibility through actual example.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.107-112
• /
• 2010

PLC를 사용한 제어시스템에서 SFC 언어를 사용하면 전체 공정의 흐름을 이해하기 쉽고 유지보수가 용이하다. SFC 언어는 단일 시퀀스, 선택 시퀀스, 병렬 시퀀스로 나누어지고, 여러 조건에 맞게 처리하는 선택시퀀스로 프로그램 할 때 선택분기 스텝에 에러가 발생하면 전체 공정이 정지하게 된다. 이 에러스텝이 전체 공정에 크게 영향을 안주는 공정이라면 전체 공정을 정지시키지 않고 에러를 처리하면 손실은 줄어들게 된다. 본 논문에서는 선택시퀀스에서 리모트 콘트롤을 사용하여 선택시퀀스를 효율적으로 제어하는 방법을 제시하고 적용 예를 통해 그의 타당성을 확인하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권9호
• /
• pp.460-466
• /
• 2002

A reliable fault phase selection algorithm plays a very important role in transmission line protection, Particularly in Extra High Voltage (EHV) networks. The conventional fault phase selection algorithm used the phase difference between positive and negative sequence current excluding load current. But, it is difficult to pick out only fault current since we can not know when a fault occurs and select the fault phase in weak-infeed conditions that dominate zero-sequence current in phase current. The proposed algorithm can select the accurately fault phase using the sum of unit vectors which are calculated by positive-sequence voltage and negative-sequence voltage.

• 산업경영시스템학회지
• /
• 제11권18호
• /
• pp.59-69
• /
• 1988

This study represents the method of application of W.S(Work Sampling) to determine job sequence. The result shows job sequence which has the came performance measure of optimal job sequence is selected by average number of 199 sampling. In the case, the optimal job sequence is not selected within the sampling number of 921 which satisfy the reliability of 99.5% and precision of 99%, the deviation is very little which 0.73%. This improves the possibility of application of W.S method to select optimal job sequence is very high.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.134-136
• /
• 2007

Sequential Function Chart(SFC) is very easy to grasp the sequential flow of control logic and has the compatability for a maintenance, In process control, when an error is occurred, to execute other routine by force, we control the process by remote control. In this paper, we proposed the method of select sequence control by remote control in process control designed by Sequential Function Chart(SFC).

• 품질경영학회지
• /
• 제17권1호
• /
• pp.69-81
• /
• 1989

This study is concerned with a job sequencing method using the concept of sampling technique in the case of Job Shop. This is the follow study of Kang and Ro (1988) which examined the possibility of application of sampling technique to determine the Job Sequence in the case of Flow Shop. Not only it is very difficult, but also it takes too much time to develop the appropriate job schedules that satisfy the complex work conditions. The most job sequencing algorithms have been developed to determine the best or good solution under the special conditions or assumptions. The application areas of these algorithms are also very narrow, so it is very hard to find the appropriate algorithm which satisfy the complex work conditions. In this case it is very desirable to develop a simple job sequencing method which can select the optimal job sequence or near optimal job sequence with a little effort. This study is to examine the effect of sampling job sequencing which can select the good job of 0.01%~5% upper good group. The result shows that there is the sets of 0.05%~23% job sequence group which has the same amount of performance measure with the optimal job sequence in the case of experiment of N/M/G/$F_{max}$. This indicates that the sampling job sequencing method is a useful job sequencing method to find the optimal or good job sequence with consuming a small amount of time. The results of ANOVA show that the only one factor, number of machines is the significant factor for determining the job sequence at ${\alpha}=0.01$. It takes about 10 minutes to compare the number of 10,000 samples of job sequence by personal computer and it is proved that the selection rate of the same job sequence with optimal job sequence is 23.0%, 3.9% and 0.065% in the case of 2 machines, 3 machines and 4 machines, respectively. The area of application can readily be extended to the other work condition.

• 대한교통학회지
• /
• 제14권2호
• /
• pp.45-58
• /
• 1996

In a large signal intersection, it is the most important to set phase sequences and phase intervals of traffic signal in order to improve the efficiency of the capacity as well as safety. These setting allows to select the best sequence of signal phase among several alternatives, and thus to rearrange the starting and ending points of the individual phase using an effective interphase periods (EIP). The EIP is a gap between previous and current traffic movements at a potential collision point in an intersection. Each of traffic movements has an equality for safety and efficiency at the balanced condition of EIP. This paper presents how to set optimally the phase sequences and intervals of traffic signal in an intersection using phase based approach. And in the second part, we applied the theory developed in the first part. In particular, a numerical example of phase base signal setting is presented using a matrix computation method in order to select the best sequence among several alternatives, and thus to rearrange the starting and ending points of the individual phase using the EIP. This method also allows to apply to optimum signal setting even in five-lag or staggered-type intersection.

• 한국정보과학회논문지:시스템및이론
• /
• 제36권4호
• /
• pp.283-290
• /
• 2009

Rank/select 자료구조는 트리, 그래프, 문자열 인덱스 등의 다양한 자료구조를 간결하게 표현하는 기본 도구이다. Rank/select 자료구조는 주어진 문자열에 어느 위치까지 나타난 문자 개수를 세는 연산을 처리한다. 효율적인 rank/select 자료구조를 위해 이론적인 압축 방식들이 제안되었으나, 실제 구현에 있어 연산 시간 및 저장 공간의 효율을 보장할 수 없었다. 본 논문은 간단한 방법으로 이론적인 압축 크기를 보장하면서 연산 시간도 효율적인 rank/select 자료구조 구현 방법을 제시한다. 본 논문의 실험을 통해, 복잡한 인코딩 방법 없이도 이론적인 nH$_0$ + O(n) 비트 크기에 근접하면서 기존의 HSS 자료구조보다 빠른 rank/select 연산을 지원하는 구현 방법임을 보인다.

• 한국CDE학회논문집
• /
• 제18권6호
• /
• pp.417-427
• /
• 2013

Assembly direction is used in order to confirm the generated assembly sequences in an automatic assembly sequence planning system. Moreover, assembly sequence planners can ascertain the feasibility of a sequence during simulation with assembly direction based in a CAD environment. In other words, assembly direction is essential for sequence optimizing and automatic generation. Based on the importance of assembly direction, this paper proposes a method to select the best direction for the generated assembly sequence using disassembly simulation and geometrical common area between assembled parts. Simultaneously, this idea can be applied to verify the generated assembly sequence. In this paper, the automatic selection of assembly direction and sequence correction system is designed and implemented. The developed algorithms and the implemented system are verified based on case study in the CAD environment.

• East Asian mathematical journal
• /
• 제32권4호
• /
• pp.443-464
• /
• 2016

The purpose of ths study is to compare and analyze the sequence of teaching multiplication facts in the elementary school mathematics. Generally, the multiplication in the elementary school mathematics is composed of the followings; concepts of multiplication, situations involving multiplication, didactical models for multiplication, and multiplication strategies for teaching multiplication facts. This study is focusing to multiplication facts, especially to the sequence of teaching and multiplication strategies. The method of this study is a comparative and analytic method. In order to compare textbooks, we select the Korean elementary mathematics textbooks(1st curriculum~2009 revised curriculum) and the 9 foreign elementary mathematics textbooks(Japan, China, Germany, Finland, Hongkong etc.). As results of comparative investigation, the sequence of teaching multiplication facts is reconsidered on a basis of elementary students' mathematical thinking. And the connectivity of multiplication facts is strengthened in comparison with the foreign elementary mathematics textbooks. Finally multiplication strategies for teaching multiplication facts are discussed for more understanding and reasoning the principles of multiplication facts in the elementary school mathematics.