• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.305-307
• /
• 2009

When we design the control system used Programmable Logic Controller(PLC), we program the main algorithm by Ladder Diagram(LD) among the standard language. We can substitute the select sequence function by the unique sequence. We can implement this function by the delay time. Therefore this thesis show the select sequence function by the unique sequence and we confirmed its feasibility through actual example.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.107-112
• /
• 2010

When we design the control system used Programmable Logic controller(PLC), if we program a Sequential Function Chart(SFC), It is easy to understand the sequential flow of control, to maintenance the controller and to describe a program. SFC language is programmed by a single sequence, a select sequence and a parallel sequence. In a select sequence, when the select step is error, the whole process is stopped. If the error step has no connection the whole process, the loss is down when we debugging the program without stopping the whole process. Therefore, this thesis shows the efficient method of remote control for select sequence and we confirmed its feasibility through actual example.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.9
• /
• pp.460-466
• /
• 2002

A reliable fault phase selection algorithm plays a very important role in transmission line protection, Particularly in Extra High Voltage (EHV) networks. The conventional fault phase selection algorithm used the phase difference between positive and negative sequence current excluding load current. But, it is difficult to pick out only fault current since we can not know when a fault occurs and select the fault phase in weak-infeed conditions that dominate zero-sequence current in phase current. The proposed algorithm can select the accurately fault phase using the sum of unit vectors which are calculated by positive-sequence voltage and negative-sequence voltage.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.11 no.18
• /
• pp.59-69
• /
• 1988

This study represents the method of application of W.S(Work Sampling) to determine job sequence. The result shows job sequence which has the came performance measure of optimal job sequence is selected by average number of 199 sampling. In the case, the optimal job sequence is not selected within the sampling number of 921 which satisfy the reliability of 99.5% and precision of 99%, the deviation is very little which 0.73%. This improves the possibility of application of W.S method to select optimal job sequence is very high.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.134-136
• /
• 2007

Sequential Function Chart(SFC) is very easy to grasp the sequential flow of control logic and has the compatability for a maintenance, In process control, when an error is occurred, to execute other routine by force, we control the process by remote control. In this paper, we proposed the method of select sequence control by remote control in process control designed by Sequential Function Chart(SFC).

• Journal of Korean Society for Quality Management
• /
• v.17 no.1
• /
• pp.69-81
• /
• 1989

This study is concerned with a job sequencing method using the concept of sampling technique in the case of Job Shop. This is the follow study of Kang and Ro (1988) which examined the possibility of application of sampling technique to determine the Job Sequence in the case of Flow Shop. Not only it is very difficult, but also it takes too much time to develop the appropriate job schedules that satisfy the complex work conditions. The most job sequencing algorithms have been developed to determine the best or good solution under the special conditions or assumptions. The application areas of these algorithms are also very narrow, so it is very hard to find the appropriate algorithm which satisfy the complex work conditions. In this case it is very desirable to develop a simple job sequencing method which can select the optimal job sequence or near optimal job sequence with a little effort. This study is to examine the effect of sampling job sequencing which can select the good job of 0.01%~5% upper good group. The result shows that there is the sets of 0.05%~23% job sequence group which has the same amount of performance measure with the optimal job sequence in the case of experiment of N/M/G/$F_{max}$. This indicates that the sampling job sequencing method is a useful job sequencing method to find the optimal or good job sequence with consuming a small amount of time. The results of ANOVA show that the only one factor, number of machines is the significant factor for determining the job sequence at ${\alpha}=0.01$. It takes about 10 minutes to compare the number of 10,000 samples of job sequence by personal computer and it is proved that the selection rate of the same job sequence with optimal job sequence is 23.0%, 3.9% and 0.065% in the case of 2 machines, 3 machines and 4 machines, respectively. The area of application can readily be extended to the other work condition.

• Journal of Korean Society of Transportation
• /
• v.14 no.2
• /
• pp.45-58
• /
• 1996

In a large signal intersection, it is the most important to set phase sequences and phase intervals of traffic signal in order to improve the efficiency of the capacity as well as safety. These setting allows to select the best sequence of signal phase among several alternatives, and thus to rearrange the starting and ending points of the individual phase using an effective interphase periods (EIP). The EIP is a gap between previous and current traffic movements at a potential collision point in an intersection. Each of traffic movements has an equality for safety and efficiency at the balanced condition of EIP. This paper presents how to set optimally the phase sequences and intervals of traffic signal in an intersection using phase based approach. And in the second part, we applied the theory developed in the first part. In particular, a numerical example of phase base signal setting is presented using a matrix computation method in order to select the best sequence among several alternatives, and thus to rearrange the starting and ending points of the individual phase using the EIP. This method also allows to apply to optimum signal setting even in five-lag or staggered-type intersection.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.4
• /
• pp.283-290
• /
• 2009

The rank/select data structure is a basic tool of succinct representations for several data structures such as trees, graphs and text indexes. For a given string sequence, it is used to answer the occurrence of characters up to a certain position. In previous studies, theoretical rank/select data structures were proposed, but they didn't support practical operational time and space. In this paper, we propose a simple solution for implementing rank/select data structures efficiently. According to experiments, our methods without complex encodings achieve nH$_0$ + O(n) bits of theoretical size and perform rank/select operations faster than the original HSS data structure.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.6
• /
• pp.417-427
• /
• 2013

Assembly direction is used in order to confirm the generated assembly sequences in an automatic assembly sequence planning system. Moreover, assembly sequence planners can ascertain the feasibility of a sequence during simulation with assembly direction based in a CAD environment. In other words, assembly direction is essential for sequence optimizing and automatic generation. Based on the importance of assembly direction, this paper proposes a method to select the best direction for the generated assembly sequence using disassembly simulation and geometrical common area between assembled parts. Simultaneously, this idea can be applied to verify the generated assembly sequence. In this paper, the automatic selection of assembly direction and sequence correction system is designed and implemented. The developed algorithms and the implemented system are verified based on case study in the CAD environment.

• East Asian mathematical journal
• /
• v.32 no.4
• /
• pp.443-464
• /
• 2016

The purpose of ths study is to compare and analyze the sequence of teaching multiplication facts in the elementary school mathematics. Generally, the multiplication in the elementary school mathematics is composed of the followings; concepts of multiplication, situations involving multiplication, didactical models for multiplication, and multiplication strategies for teaching multiplication facts. This study is focusing to multiplication facts, especially to the sequence of teaching and multiplication strategies. The method of this study is a comparative and analytic method. In order to compare textbooks, we select the Korean elementary mathematics textbooks(1st curriculum~2009 revised curriculum) and the 9 foreign elementary mathematics textbooks(Japan, China, Germany, Finland, Hongkong etc.). As results of comparative investigation, the sequence of teaching multiplication facts is reconsidered on a basis of elementary students' mathematical thinking. And the connectivity of multiplication facts is strengthened in comparison with the foreign elementary mathematics textbooks. Finally multiplication strategies for teaching multiplication facts are discussed for more understanding and reasoning the principles of multiplication facts in the elementary school mathematics.