• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.89-94
• /
• 2013

This study was carried out to calculate the genic values of days for flowering in commercial breeding lines of Korean hot pepper (Capsicum annuum L.). Two breeding lines of pepper '#2132' ($P_1$) early-flowering, and '#1308' ($P_2$) medium-late flowering, and their $F_1$ and $F_2$ generations were used in this study. By using partitioning method (Thseng and Hosokawa, 1971, 1972), it was possible to estimate, from the $F_2$ generations, the number of effective factor pairs differentiating the two parents. It was found out that the two parents were differentiated by two effective factor pairs, A:a and B:b. In the breeding lines used, the inheritance of days to flowering showed that the $F_1$ flowered a little earlier than the earlier flowering parent through the effect of over-dominance. However, $F_2$ flowered earlier or later than both parents through transgressive segregation. Conclusively, the magnitude of genic effects of A-a gene in flowering days was -13.81 days, and B-b gene was -6.73 days. The interaction between the two non-allelic factors using partitioning method was -5.26 days.

• Current Research on Agriculture and Life Sciences
• /
• v.20
• /
• pp.1-8
• /
• 2002

This study was conducted to obtain the information of varietal development using wild soybean through investigation of variation and heredity of major agronomic characters in $F_2$ generation of interspecific cross between Glycine max and G. soja. In segregating populations of two crosses, all characters observed except 100-seed weight showed transgressive segregation. Days to flowering showed normal distribution; mean days to flowering in $F_1$, and $F_2$ was approximately mean of parent. Mean of $F_1$ for 100-seed weight was 6.2g and 5.7g for Eunhakong/KLG10084 and Sohaegnamulkong/KLG10084, respectively, which were somewhat skewed distribution to small seeded parents. Mean seed yield of $F_2$ was about mean of two parents. Degree of vine was 6.4 and 5.7 in $F_1$ for two crosses but it was 6.0 in $F_2$ for Eonbakong/KLG10084, which revealed the degree of vine as partial dominance while 4.6 for Sobaegnamulkong/KLG10084, somewhat different results from the previous cross. Broad-sense heritability($h^2B$) for plant height, days to flowering, pods per plant, seed yield, and degree of vine was comparatively high and narrow-sense heritability($h^2B$) for 100-seed weight which is the moot important character in the development of small seed-size sprout soybean was 52.3% and 65.6% for Eunhakong/KLG10084 and Sohaegnamulkong/KLG10084, respectively, which indicated that selection for the character in early generation was possible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3704-3712
• /
• 2012

Recently, antiwashout underwater concrete has been increasingly used for marine foundations of long span bridges. However, to shorten the construction period of antiwashout underwater concrete used in marine foundations, high fluidity antiwashout underwater concrete should be manufactured largely improving fluidity than the previous one. Thus, the objective of this experimental research is to suggest optimum mix proportions of high fluidity antiwashout underwater concrete. For this purpose, concrete specimens containing ground granulated blast furnace slag were manufactured according to the dosage of antiwashout admixture for unit binder contents of 550 and 600kg/$m^3$, respectively. And then, their quality performances such as slump flow, setting time, underwater segregation resistance, and ratio of compressive strength were evaluated according to the related specification of Korea Concrete Institute. It was observed from the test results that the minimum dosage of antiwashout admixture was necessary to satisfy the related specification.

• Current Research on Agriculture and Life Sciences
• /
• v.5
• /
• pp.52-58
• /
• 1987

The yeast S. cerevisiae DBY747 was transformed with E. C - S. C shuttle vector YIp5, YEp13 and YRp7 by the method of spheroplast. The transformation frequency of YEp13 and YRp7 in S. cerevisiae DBY747 was $1.2{\times}10^3$ and $1.0{\times}10^2$ per $10{\mu}g$ of DNA, respectively. The transformants with YIp5 plasmid incapable of autonomous replication in S. cerevisiae were not detected in the condition of this experiment, but YIpS plasmid expressed the gene carried on it when cotransformed with a helper plasmid such as YEp13 or YRp7 : autonomously replicating plasmid. When plasmids were used in covalently closed circular form, cotransformation frequency of Ylp5-YEpl3 and Ylp5-YRp7 was 210 and 95 per $10{\mu}g$ of DNA, respectively. In cotransformation of linear plasmids, transformation frequency of the same cohesive ends was similar to that of noncomplementary cohesive ends. Transformants by the cotransformation with circular plasmids have been shown much higher frequency than with linear plasmids in S. cerevisiae DBY 747. The mitotic segregation stability test suggested that the cotransformant of YIpS-YEp13 was more stable than that of YIpS-YRp7.

• Journal of Korean Society of Forest Science
• /
• v.78 no.2
• /
• pp.242-247
• /
• 1989

This study was conducted to estimate the inheritance of allozyme variants in IDH, ME and PGI, using megagametophyte tissue of seeds of Pinus densiflora and Pinus thunbergii in Kyungpook province. Two alleles at a single locus were detected for MH in Pinus densiflora, but Pinus thunbergii showed no varition, showing only one band. Four alleles at one locus were determined for ME in Pinus densiflora and Pinus thunbergii. Two loci were found for PGI and no variation seemed to occurred in A-locus as the presence of one single band. Five alleles were presented in B-locus in Pinus densiflora, but two alleles $B_1$ and $B_2$ in Pinus thunbergii. In PGI, an allozyme composed of multiple bands is observed from haploid megagamtophyte tissues. The isozyme variants of IDH, ME and PGI were appeared to segregate into 1 : 1 ratio for all zones.

• Korean Journal of Metals and Materials
• /
• v.56 no.11
• /
• pp.787-795
• /
• 2018

The effects of tempering condition on the microstructure and mechanical properties of 30MnB5 hot stamping steel were investigated in this study. Before the tempering, hot-stamped 30MnB5 steel was composed of only ${\alpha}^{\prime}$-martensite microstructure without precipitates. After the tempering at $180^{\circ}C$ for 120 min, nano-sized ${\varepsilon}$-carbides were precipitated in the ${\alpha}^{\prime}$-martensite laths. After tempering at $250^{\circ}C$ for 60 min, cementite was precipitated along the ${\alpha}^{\prime}$-martensite lath boundaries. The cementite was also observed in the specimens tempered at $350^{\circ}C$ for 30 min and $450^{\circ}C$ for 6 min, respectively. The globular ${\alpha}$-ferrite appeared at $350^{\circ}C-30min$ tempering, and the volume fraction of ${\alpha}$-ferrite increased when the tempering temperature was increased. The yield strength increased after tempering, and it reached a peak with the tempering condition of $180^{\circ}C-120min$, due to the nano-sized precipitates in the ${\alpha}^{\prime}$-martensite lath. After the tempering, the steel's ultimate tensile strength (UTS) was decreased due to the reduction in dislocation density and C segregation to lath boundaries. The highest elongation was observed at the $180^{\circ}C-120min$ tempering condition, due to the reduction of residual stress, and the lack of precipitates along the lath boundaries. The $180^{\circ}C-120min$ tempering condition was considered to have outstanding crash performance, according to toughness and anti-intrusion calculation results. In drop tower crash tests, the 30MnB5 door impact beam tempered at $180^{\circ}C$ for 120 min showed better crash performance compared to a 22MnB5 door impact beam.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.194-201
• /
• 2019

This study analyzed the properties of concrete depending on the coal gasification slag(CGS) contents in order to examine the applicability of CGS as the fine aggregate for concrete. Experimental results, trended that the slump and slump flow increased with increasing CGS contents, and air contents has decreased. Evaluation index for segregation of normal strength concrete(EISN) is showed was good from CGS 25% when using crushed sand A(CSa) and CGS 50% when using mixed sand(MS). The compressive strength decreased with increasing CGS contents when CSa was used. However, when MS was used, the maximum value was CGS 50% due to parabolic tendency. Depending on fine aggregates type, compared with compressive strength of CSa was about 8% higher than that of MS, and depending on the use or unuse of CGS, more advantageous at higher strength than low strength. As a result of relative performance study on the quality of concrete according to the CGS contents, it is considered that CGS can be positively contributed to enhancement of workability and strength development when mixed with fine aggregate around 25~50%.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.1
• /
• pp.31-42
• /
• 2020

Horse fat is known to be an effective ingredient in Asia, and the horse fat itself, which is mixed with other ingredients at the additive level, is often sold as a finished product. In this case, physical properties of the horse fat raw material are important. Many horse fats produced in Korea (Jeju) have low temperature stability, so if not stored at low temperatures, segregation may occur. In the case of Japanese horse fat, it is partially hydrogenated or is used the solid phase as the horse fat by separating the liquid phase and the solid phase that is harder and more stable than the horse fat of Jeju. In this study, the physical properties were tested to improve the temperature stability even without the partial hydrogenation process of Jeju horse fat. Various oil gelling agents were used in the study. Results confirmed that the physical properties of the hydroxystearic acid added Jeju horse fat were improved. In addition, stability evaluations at temperatures of 25 ℃, 40 ℃, 45 ℃ and flow behavior evaluations at temperatures of 25 ℃, 30 ℃, 40 ℃ were performed for Jeju horse fat with hydroxystearic acid, 100% Jeju horse fat, and 100% Japanese horse fat. Results showed that the Jeju horse fat improved in flow behavior by adding hydroxystearic acid similar to that of Japanese horse fat. In addition, when the crystal state was observed under a microscope, the thermal stability was improved by decreasing the size of the needle-type crystals with the addition of hydroxystearic acid. Jeju horse fat containing hydroxystearic acid was found to have no physical problems even when stored at room temperature for a long time.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.152-160
• /
• 2021

Converter steel slag(BOF slag) is a vast amount of solid waste generated in the steelmaking process which has very low utilization rate in Korea. Due to the presence of free CaO which can derive bad volume stability in BOF slag, it usually land filled. For recycling BOF and identify its applicability as fine aggregate, this study investigates the fundamental characteristics of mortar with cement replaced ferronickel slag(FNS), which has the potential to be used as a binder. The results suggest that the mineral phases of BOF slag mainly include larnite(CaSiO₄), mayenite(Ca₁₂Al₁₄O₃₃) and wuestite(FeO) while olivine crystallines are shown in FNS. The results of flow and setting time reveals that the flowability and process of hardening increased when the amount of FNS and BOF slag incorporated was increased. The length change shows that the amount of change in the length of the mortar was almost constant regardless of mix proportion while compressive strength was reduced. Micro structure test results revealed that FNS or/and BOF slag mix took a long time to react in the cement matrix to form a complete hydration products. To achieve the efficient utilization of B OF slag as construction materials, proper replacement rate is necessary.

• Korean Journal of Breeding Science
• /
• v.42 no.1
• /
• pp.56-60
• /
• 2010

This study was carried out to develop of macro-protocol and the biosafety guide Golden Rice, modified vitamin A at large scale GMO field. Commercialization of genetically modified (GM) plants will be required the assessment of risks associated with the release of GM plants that should include a detailed risk assessment of their impacts in the environment and human health. Prior to GM plant release, applicants should provide the information on GM crops for approval. A total of $4,700m^2$ GM field, each of Golden Rice and 'Nakdong' were used for further analysis on agronomic traits and pathogenesis. Generally plant growth and panicle number in the transgenic lines were lower than in the wild type under field condition. The major agronomic traits such as plant growth, grain quality in Golden Rice were similar than in 'Nakdong'. The yield difference was due to reduced ripened rate and the 1,000 grain weight. The grain shape was similar donor plant, however, color of brown rice was different from segregation. Also the difference of pathogenesis reaction was not significant in the leaf blast and sheath blight between Golden Rice and 'Nakdong'. These results provided the agronomic data and pathogenesis for risk assessment analysis of Golden Rice and suggested that the macro-protocol could be useful to detect GM plants.