• 제목/요약/키워드: Seed structure

검색결과 385건 처리시간 0.032초

Fabrication of Hierarchical Nanostructures Using Vacuum Cluster System

  • Lee, Jun-Young;Yeo, Jong-Souk
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.389-390
    • /
    • 2012
  • In this study, we fabricate a superhydrophobic surface made of hierarchical nanostructures that combine wax crystalline structure with moth-eye structure using vacuum cluster system and measure their hydrophobicity and durability. Since the lotus effect was found, much work has been done on studying self-cleaning surface for decades. The surface of lotus leaf consists of multi-level layers of micro scale papillose epidermal cells and epicuticular wax crystalloids [1]. This hierarchical structure has superhydrophobic property because the sufficiently rough surface allows air pockets to form easily below the liquid, the so-called Cassie state, so that the relatively small area of water/solid interface makes the energetic cost associated with corresponding water/air interfaces smaller than the energy gained [2]. Various nanostructures have been reported for fabricating the self-cleaning surface but in general, they have the problem of low durability. More than two nanostructures on a surface can be integrated together to increase hydrophobicity and durability of the surface as in the lotus leaf [3,5]. As one of the bio-inspired nanostructures, we introduce a hierarchical nanostructure fabricated with a high vacuum cluster system. A hierarchical nanostructure is a combination of moth-eye structure with an average pitch of 300 nm and height of 700 nm, and the wax crystalline structure with an average width and height of 200 nm. The moth-eye structure is fabricated with deep reactive ion etching (DRIE) process. $SiO_2$ layer is initially deposited on a glass substrate using PECVD in the cluster system. Then, Au seed layer is deposited for a few second using DC sputtering process to provide stochastic mask for etching the underlying $SiO_2$ layer with ICP-RIE so that moth-eye structure can be fabricated. Additionally, n-hexatriacontane paraffin wax ($C_{36}H_{74}$) is deposited on the moth-eye structure in a thermal evaporator and self-recrystallized at $40^{\circ}C$ for 4h [4]. All of steps are conducted utilizing vacuum cluster system to minimize the contamination. The water contact angles are measured by tensiometer. The morphology of the surface is characterized using SEM and AFM and the reflectance is measured by spectrophotometer.

  • PDF

옥수수 종자의 발육 중 ethylene 발생과 내부형태 변화 (Ethylene Production and Internal Structure of Developing Maize Seeds)

  • 이석순;서정문;홍승범
    • 한국작물학회지
    • /
    • 제51권5호
    • /
    • pp.425-431
    • /
    • 2006
  • 옥수수의 종자발육에 ethylene이 미치는 영향을 알기 위하여 마치종, 단옥수수, 초당옥수의 배와 배유의 발육과 ethylene 발생을 조사하였다. 그리고 초당옥수수에 ethylene 발생과 작용을 조절하는 aminoethoxyvinyl glycine(AVG), silver thiosulfate(STS), ethephon(2-chloroethylphosphonic acid, CEPA)를 출사 후 9 및 21일에 전 식물체와 포엽에 처리하여 ethylene 발생양상과 배와 배유의 발육을 조사하여 채종 시 종자발달을 촉진할 수 있는 방법을 찾고자 하였으며, 그 결과를 요약하면 다음과 같다. 1. 마치종은 배와 배유 모두 출사 후 56일까지 건물중이 증가하였다. 그러나 단옥수수와 초당옥수수의 배는 출사 후 각각 56일 및 49일까지, 배유는 출사 후 35일 및 28일까지 증가하였다. 2. 종자의 ethylene 발생량은 초당옥수수가 단옥수수나 마치종보다 많았다. 3. 배유조직의 변화는 출사 후 21일부터 배의 끝 부분에서 동공이 생기기 시작하여 마치종은 동공이 유지되나 단옥수수는 출수 후 42일에는 동공이 붕괴되었고, 초당옥수수는 배 위쪽 및 옆쪽까지 동공이 생겼다가 수축되었다. 4. 초당옥수수 품종 Xtrasweet 82에서 AVG와 STS는 ethylene 발생량을 감소시키고 100립중을 다소 증가시켰으나, CEPA는 ethylene 발생량을 증가시키고 100립중을 감소 시키는 경향이었다. 5. CEPA 처리는 배유에 동공이 발생하는 시기가 다소 빨랐으나 AVG와 STS 처리는 큰 효과가 없었다.

Genetic Diversity and Spatial Structure of Symplocarpus renifolius on Mt. Cheonma, Korea

  • Jeong, Ji-Hee;Park, Yu-Jin;Kim, Zin-Suh
    • 한국자원식물학회지
    • /
    • 제20권6호
    • /
    • pp.530-539
    • /
    • 2007
  • Genetic variation and structure of 9 subpopulations of Symplocarpus renifolius Schott ex Tzvelev on Mt. Cheonma, in Korea, were determined via starch-gel electrophoresis. The genetic diversity at 10 loci for 8 isozymes ($P_{99}=66%,\;A=2.26,\;H_o=0.212,\;H_e=0.230$) was found to be considerably higher than that seen in other long-lived perennial plants. On the whole, the genotype frequencies were in accordance with Hardy-Weinberg expectations. Approximately 5%($\theta=0.049$) of the total variability was among subpopulations. The high levels of observed genetic diversity in S. renifolius were attributed to a universal outcrossing system and other specific factors like differences in age classes and widely scattered individuals around the main distribution. Heterozygosity was highest at a mid-range of elevation($450m{\sim}600m$). The lowest heterozygosity at lower elevation was attributed to the possible origin of seeds transported by water from upstream regions during the monsoon season. Spatial structure in a subpopulation evidenced a strong autocorrelation between closer individuals within $3{\sim}4m$ of distance. This was assumed to be attributable to the restricted seed dispersal characteristics of S. renifolius. In accordance with the findings generated in this study, some implications regarding the conservation of S. renifolius at the Mt. Cheonma were also presented.

Stand Structure and Regeneration Pattern of Kalopanax septemlobus at the Natural Deciduous Broad-leaved Forest in Mt. Jeombong, Korea

  • Kang, Ho-Sang;Lee, Don-Koo
    • Journal of Ecology and Environment
    • /
    • 제29권1호
    • /
    • pp.17-22
    • /
    • 2006
  • Since the demands not only for value-added timber but the environmental functions of forests had been increased, native tree species has been, and is rapidly being replaced by foreign tree species in many parts of the world. However, the studies on population structure and regeneration characteristics of native tree species were not conducted enough. Regeneration of Kalopanax septemlobus growing among other hardwoods in natural forests is very difficult because of its low seed viability and germination rate. The study examined the distribution of mature trees of K. septemlobus and their regeneration pattern at the 1.12 ha study plot in natural deciduous broad-leaved forest of Mt. Jeombong. The density and mean DBH of K. septemlobus was 97 trees per ha and 32 cm, respectively. The spatial distribution of K. septemlobus showed a random pattern (aggregation index is 0.935) in the 1.12 ha study plot. The age of 90 trees among 99 sample trees of K. septemlobus ranged from 90 to 110 years and represented a single cohort, thus suggesting that K. septemlobus in advance regeneration has regenerated as a result of disturbances such as canopy opening.

산화아연 나노핵의 조작을 통한 산화아연 나노로드의 제어 (Artificial Control of ZnO Nanorods via Manipulation of ZnO Nanoparticle Seeds)

  • 신경식;이삼동;김상우
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.399-399
    • /
    • 2008
  • Synthesis and characterization of ZnO structure such as nanowires, nanorods, nanotube, nanowall, etc. have been studied to multifunctional application such as optical, nanoscale electronic and chemical devices because it has a room-temperature wide band gap of 3.37eV, large exiton binding energy(60meV) and various properties. Various synthesis methods including chemical vapor deposition (CVD), physical vapor deposition, electrochemical deposition, micro-emulsion, and hydrothermal approach have been reported to fabricate various kinds of ZnO nanostructures. But some of these synthesis methods are expensive and difficult of mass production. Wet chemical method has several advantage such as simple process, mass production, low temperature process, and low cost. In the present work, ZnO nanorods are deposited on ITO/glass substrate by simple wet chemical method. The process is perfomed by two steps. One-step is deposition of ZnO seeds and two-step is growth of ZnO nanorods on substrates. In order to form ZnO seeds on substrates, mixture solution of Zn acetate and Methanol was prepared.(one-step) Seed layers were deposited for control of morpholgy of ZnO seed layers by spin coating process because ZnO seeds is deposited uniformly by centrifugal force of spin coating. The seed-deposited samples were pre-annealed for 30min at $180^{\circ}C$ to enhance adhesion and crystallinnity of ZnO seed layer on substrate. Vertically well-aligned ZnO nanorods were grown by the "dipping-and-holding" process of the substrates into the mixture solution consisting of the mixture solution of DI water, Zinc nitrate and hexamethylenetetramine for 4 hours at $90^{\circ}C$.(two-step) It was found that density and morphology of ZnO nanorods were controlled by manipulation of ZnO seeds through rpm of spin coating. The morphology, crystallinity, optical properties of the grown ZnO nanostructures were carried out by field-emission scanning electron microscopy, high-resolution electron microscopy, photoluminescence, respectively. We are convinced that this method is complementing problems of main techniques of existing reports.

  • PDF

스마트카드 적용을 위한 저전력 통합 암호화 엔진의 설계 (Low Power Implementation of Integrated Cryptographic Engine for Smart Cards)

  • 김용희;정용진
    • 대한전자공학회논문지SD
    • /
    • 제45권6호
    • /
    • pp.80-88
    • /
    • 2008
  • 본 논문에서는 스마트카드 적용을 위하여 국내외 블록 암호화 표준 알고리즘인 3-DES(Triple Data Encryption Standard), AES(Advanced Encryption Standard), SEED, HASH(SHA-1)를 통합한 저전력 암호화 엔진을 하드웨어로 구현하였다. 휴대용 기기에 필수적인 작은 면적과 저전력을 위하여 하나의 라운드에 대한 각각의 암호화 블록을 구현한 후 반복동작을 하도록 설계하였고 두 단계의 클록 게이팅 기술을 적용하였다. 설계한 통합 암호화 엔진은 ALTERA Excalibur EPXA10F1020C2를 사용하여 검증하였고 합성결과 7,729 LEs와 512 바이트 ROM을 사용하여 최대 24.83 MHz 속도로 동작이 가능하였다. 삼성 0.18 um STD130 CMOS 스탠다드 셀 라이브러리로 합성한 결과 44,452 게이트를 사용하며 최대 50 MHz의 속도로 동작이 가능하였다. 또한 전력소모를 측정한 결과 25 MHz의 속도로 동작할 경우 3-DES, AES, SEED, SHA-1 모드일 때 각각 2.96 mW, 3.03 mW, 2.63 mW, 7.06 mW의 전력소모를 할 것으로 예측되었다. 이러한 저전력 통합 암호화 엔진은 스마트카드 적용에 가장 적합한 구조를 갖고 있으며 그 외에도 다양한 암호화 시스템에 적용될 수 있을 것으로 판단된다.

Feasibility of seed bank for restoration of salt marsh: a case study around the Gwangyang Bay, southern Korea

  • Lee, Seon-Mi;Cho, Yong-Chan;Lee, Chang-Seok
    • Journal of Ecology and Environment
    • /
    • 제35권2호
    • /
    • pp.123-129
    • /
    • 2012
  • Salt marsh is an important transitional zone among terrestrial, riverine, and marine ecosystems and is a productive habitat that interacts extensively with adjacent landscape elements of estuarine and coastal ecosystems. Nowadays, in addition to various human activities, a variety of natural processes induce changes in salt marshes. This study aims to provide background information to restore disturbed salt marshes and to propose their ecological restoration using seed banks. The study area is a prepared area for the Gwangyang Container Port located in the southern Korea. This area was formed by accumulating mud soils dredged from the bottom of the forward sea. This land was created in a serial process of preparing the Gwangyang container port and the salt marsh was passively restored by seeds buried in mud soil dredged from seabed. As a result of stand ordination based on vegetation data collected from the land, stands were arranged according to tolerance to salinity in the order of $Suaeda$ $maritima$, $Salicornia$ $europaea$, and $Phragmites$ $communis$ communities on the Axis 1. Landscape structure of the projected area was analyzed as well. Edges of the projected area were divided from the marginal waterway by the dike. Four types of vegetation appeared on the dike: $Alnus$ $firma$ plantation, $Robinia$ $pseudoacacia$ plantation, $Lespedeza$ $cyrtobotrya$ plantation, and grassland. In the more internal areas, two types of vegetation sequences appeared: $Aster$ $tripolium$ community-$Suaeda$ $glauca$ community-$Salicornia$ $europaea$ community sequence and $Aster$ $tripolium$ community-$Suaeda$ $maritima$ community-$S.$ $europaea$ community sequence. Mixed community showed the highest species diversity (H' = 0.86) and $S.$ $europaea$ community showed the lowest (H' = 0.0). Evenness is the highest in Mixed community (J' = 2.26) and the lowest in $S.$ $maritime-S.$ $europaea$ community (J' = 0.0). Several plant communities were successfully established on the land created by mud soil dredged from the bottom of Gwangyang Bay. Moreover, community diversity in this area approached a similar level with those from other studies involving natural salt marshes. Therefore, restoration effect based on community diversity obtained in our study can be evaluated as a successful achievement. In this respect, although most salt marshes in Korea and other places worldwide have been destroyed or disturbed by excessive land use, feasibility of seed bank as a restoration tool is greatly expected.

SEED 형식 암호에서 S 박스와 G 함수 구성에 관한 연구 (A study on the constitution of S box and G function in SEED-type cipher)

  • 송홍복;조경연
    • 한국통신학회논문지
    • /
    • 제27권4A호
    • /
    • pp.291-300
    • /
    • 2002
  • 본 논문에서는 우리나라 128 비트 블록 암호 알고리즘 표준인 SEED와 유사한 구조를 가지는 암호방식에서 최적화한 S 박스와 G 함수를 구성하는 방식을 제안한다. S 박스는 비선형 함수와 아편변환으로 구성한다. 비선형함수는 차분공격과 선형공격에 강한 특성을 가지며, '0'과 '1'을 제외하고 입력과 출력이 같은 고정점과 출력이 입력의 1의 보수가 되는 역고정점을 가지지 않는 GF(2$^{8}$ ) 상의 역수로 구성한다. 아핀변환은 입력과 출력간의 상관을 최저로 하면서 고정점과 역고정점이 없도록 구성한다. G 함수는 4개의 S 박스 출력을 GF(2$_{8}$ ) 상의 4$\times$4 행렬식을 사용하여 확산선형변환한다. G 함수는 MDS(Maximum Distance Separable) 코드를 생성하구 SAC(Strict Avalanche Criterion)를 만족하고, 고정점과 역고정점 및 출력이 입력의 2의 보수가 되는 약한 입력이 없으며, 하드웨어 구현이 용이하도록 구성한다. 본 논문에서 제안한 S 박스와 G 함수는 차분공격과 선형공격에 강하고, 약한 입력이 없으며, 하드웨어 구현이 용이하며, 확산 특성이 우수하므로 안전성이 높은 암호 방식의 구성 요소로 활용할 수 있다.

고로쇠나무 천연림의 지역별 군집구조, 시과 및 엽 형태 (Studies on the Community Structure, Samara and Leaf Shape of Three Natural Acer pictum subsp. mono Forest)

  • 김갑태;김회진;이재현
    • 한국환경생태학회지
    • /
    • 제28권1호
    • /
    • pp.55-61
    • /
    • 2014
  • 고로쇠나무 천연집단의 군집구조와 시과 및 잎의 형질의 변이를 파악하고자, 2012년 5월부터 2013년 10월까지 세 지역(강원도 양구군, 경상북도 영양군 및 전남 광양시)에 분포하는 고로쇠나무 천연집단의 군집구조와 열매와 엽형태를 조사하였다. 고로쇠나무의 평균상대우점치(MIP)가 양구 19.8%, 영양 22.0% 및 광양 17.1% 등으로 비교적 낮고, 중층에서도 양구와 광양에서는 고로쇠나무의 상대우점치(IP)가 당단풍나무와 까치박달나무보다 낮게 나타났으며, 하층에서는 양구 1.8%, 영양 1.9%, 광양 0.0% 였다. 이런 결과로 볼 때 천연림의 고로쇠나무의 평균상대우점치가 앞으로 점차 감소하는 경향을 보일 것이라 사료된다. 시과의 각도와 길이는 지역 간 통계적 유의차가 인정되었다. 양구에 비하여 영양과 광양지역에서 7개의 장상맥을 가진 개체가 보다 많이 분포하였다. 부거치가 발달하는 잎의 비율은 양구 0.6%, 영양 15.8%, 광양 20.4%로 나타났다. 이러한 결과는 고로쇠나무 천연집단의 유전변이가 있음을 암시하며, 고로쇠나무 천연집단에 대한 유전변이를 분석할 필요가 있다고 사료된다.

마스크 팩 시트의 특성 연구 (A study on the Characteristic of Mask Sheets)

  • 장혜인
    • 한국응용과학기술학회지
    • /
    • 제34권4호
    • /
    • pp.787-798
    • /
    • 2017
  • 본 연구는 시중에 판매되고 있는 시트 타입 마스크 팩의 재질에 따른 특성에 관한 연구이다. 정제수와 1.3-propanediol, 1.3-butylene glycol, Glycerine, Hyaruronic acid와 같은 수용성 성분과 Cyclomethicone, Dimethicone, Phytosqualane, Caprylic Capryl Triglyceride, Grape seed oil, Macadamia Nut oil 오일을 비롯한 다양한 오일의 흡유력을 살펴 본 결과 정제수를 제외한 모든 수용성 성분들은 점도가 커질수록 흡습능력이 커졌고 오일의 경우엔 모든 오일의 점도에 비례하여 흡유 능력이 커짐을 확인할 수 있었다. 이때 마스크 시트의 종류는 초산 발효 바이오셀룰로오스가 수용성 습윤제나 모든 오일에 있어서 500~1,000 배 이상의 함습, 함유 능력을 보여주었는데 이는 표면 구조에서 살펴본 바와 같이 5,000배 이상 확대한 사진에서 보이는 미세한 망상 구조를 이루고 있기 때문이다. 망상 구조는 단면에서도 잘 확인할 수 있었고 이러한 구조적 특징이 함습, 함유 능력을 우수하게 하며 다량 함유된 수용성 성분과 오일은 시간 경과에 따라 배출 또한 용이하게 하는 것으로 사료되는 바이다. 또한 각 마스크 시트는 소재에 따라 그 특성을 보여주고 있기에 피부에 좋은 역할을 할 수 있는 마스크 팩의 제조에 기초 연구로 삼고자 한다.