• 한국수자원학회논문집
• /
• 제51권9호
• /
• pp.795-802
• /
• 2018

본 연구에서는 실내실험을 통하여 개량형 공압식 가동보를 대상으로 보의 기립각도를 고려한 유사의 퇴적과 델타의 발달 과정을 파악하였다. 가동보 상류에서 유입되는 유사는 배수의 영향으로 유속이 느려지면서 퇴적이 되고 델타가 형성되며 하류로 이동하였다. 각 실험조건에 대하여 시간에 따른 델타의 이동속도는 델타는 시간이 지나면서 현저하게 감소하고, 보에 접근하였다. 무차원 델타의 높이($h_d/h$)가 증가할수록 무차원 델타의 이동속도($S_D/V_0$)는 감소하였다. 따라서 델타의 높이($h_d$)가 증가할수록 수심(h)은 감소하였다. 델타의 유효높이($h_w$)가 크기 때문에 델타의 체적($V_{xD}$)은 증가하지만 배수(backwater)의 영향을 받아 델타의 이동속도($S_D$)와 퇴적량은 감소하였다. 수로 경사가 일정할 때, 보의 높이(W)가 클수록 델타체적($V_{xD}$)이 증가하고, 델타의 전면부 길이비($h_d/{\Delta}S$)는 1에 가깝다. 같은 유량조건인 경우에 가동보의 기립 각도가 가장 클 때, 시간당 델타의 퇴적량($Q_s$)은 가장 작았다. 따라서 보의 높이(W)가 클수록 델타의 발달을 억제할 수 있는 효과가 크다.

• 상하수도학회지
• /
• 제23권6호
• /
• pp.799-810
• /
• 2009

With time, the stable management of turbidity is becoming more important in the water treatment process. So optimization of coagulation is important for the improvement of the sedimentation efficiency. we evaluated the mixing and hydrodynamic behavior in the coagulation basin using Computational Fluid Dynamics (CFD). The items for evaluation are a location and the speed of agitator and angle of an injection pipe. The results of the CFD simulation, the efficacy of mixing in the coagulation basin was not affected according to one or two injection pipe and angle of an injection pipe. If there is a agitator near outlet of coagulation basin, the efficacy of mixing don't improve even though the speed of agitator increase. So location of agitator is perfect when it locate center at the inlet stream. The coagulation basin at this study, the proper speed of agitator is form 20rpm to 30rpm.

• 한국유체기계학회 논문집
• /
• 제8권3호
• /
• pp.33-41
• /
• 2005

The optimum condition is defined as one that best suits the purpose of flocculation; the number of small particles should decrease, while that of large particles should increase. The object of this research was to develop a new impeller and substitute for conventional flocculators. The flow characteristics of turbines and hydrofoil type flocculators in turbulent fluids were observed using a standard $k-{\epsilon}$ Model and a computational fluid dynamics (CFD) simulation program-FLUENT. The experiments were performed to compare PBT(Pitched Blade Turbine) flocculator with twisted hydrofoil type flocculators for velocity distribution, and floe formation at conventional water treatment plants in Korea. As a result of the CED solution, twisted hydrofoil types are similar to hydrofoil flocculators for flow characteristics without regard to the twisted angle, On the other hand, it was established that turbine flocculators are greater than hydrofoil flocculators with flow unevenness and dead zone formation. Twisted hydrofoil type-II (Angle $15{\sim}20^{\circ}$) is the most proper impeller for water flocculation from this point of view with a decreasing the dead zone, maintaining of the equivalent energy distribution and a drawing up of the sedimentation substance from the bottom of the flocculation basin.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.267-274
• /
• 2004

The optimum condition is defined as one that best suits the purpose of flocculation; the number of small particles should decrease, while that of large particles should increase. The object of this research was to develop a new impeller and substitute for conventional flocculators. The flow characteristics of turbines and hydrofoil type flocculators in turbulent fluids were observed using a standard k-$\epsilon$ Model and a computational fluid dynamics (CFD) simulation program- FLUENT The experiments were performed to compare PBT(Pitched Blade Turbine) flocculator with twisted hydrofoil type flocculators for velocity distribution, and floc formation at conventional water treatment plants in Korea. As a result of the CFD solution, twisted hydrofoil types are similar to hydrofoil flocculators for flow characteristics without regard to the twisted angle, On the other hand, it was established that turbine flocculators are greater than hydrofoil flocculators with flow unevenness and dead zone formation. Twisted hydrofoil type- II (Angle $15{\~}20^{\circ}$) is the most proper impeller for water flocculation from this point of view with a decreasing the dead zone, maintaining of the equivalent energy distribution and a drawing up of the sedimentation substance from the bottom of the flocculation basin.

• 한국철도학회논문집
• /
• 제8권4호
• /
• pp.372-378
• /
• 2005

화강풍화토의 강도와 변형특성을 조사하기 위하여 불포화배수 삼축압축시험을 실시하였다. 주응력방향과 다짐방향을 0, 45, 90도의 세가지 방향성을 갖도록 하였다. 등방압축시 발생하는 압축변형률은 다짐각도에 따라 크게 영향을 받는다. 이차압축시의 변형거동에 관한 시간의존성은 다짐각도와 관계가 없는 것으로 판단되었다. 다짐각도가 압축강도와 변형에 미치는 영향은 특히 낮은 구속압력시에 크다. 다짐각도가 다르다 하더라도 다일러턴시 비율은 다일러턴시로 인한 강도증가와 상관하여 변화한다. 따라서 다짐풍화토는 초기 비등방성 조직을 갖고 있는 모래와 같이 비등방성 역학적 성질을 갖는다고 할 수 있다.

• 상하수도학회지
• /
• 제23권6호
• /
• pp.719-726
• /
• 2009

One of the alternative runoff management measures is on-site runoff mitigation, such as rainwater retention tank and infiltration facilities especially the latter that is possible to manage simultaneously runoff quality and quantity as a perspective of water-cycle. This study was conducted to develop a particle separator, inclined-pipe settling system, that could improve particle removal efficiency of road runoff as a pre-treatment device of stormwater infiltration. Solid particles larger than $100{\mu}m$ are separated by simple sedimentation; however, the significant amount of pollutants with a diameter less than $100{\mu}m$ remain in suspension. Without any treatment in that case of the runoff into infiltrate, groundwater would be deteriorated and also infiltration rate would be decreased by clogging. Therefore, we suggest optimal design parameters (inclined angle, pipe length, and surface loading rate) of inclined-pipe settling system which can be designed to effectively remove particles diameter smaller then $70{\mu}m$. Thus, the results showed TSS removal efficiency more than 80% with a particle diameter between $20{\mu}m$ and $70{\mu}m$, 100% above particle diameter $70{\mu}m$ for the inflow rate $0.018 m^3/m^2{\cdot}hr$ with pipe inclined at angle $15^{\circ}$.

• Journal of Korean Neurosurgical Society
• /
• 제63권2호
• /
• pp.218-227
• /
• 2020

Objective : To evaluate and compare the clinical and radiographic features of 25 patients with infectious spondylitis treated with anterior debridement and reconstruction using autogenous bone grafts vs. a metal cage with allogenic bone grafts. Methods : The study analyzed 25 patients diagnosed with infectious thoracolumbar spondylitis who underwent anterior radical debridement and reconstruction. Autogenous bone grafts were used in 13 patients (group 1), and a metal cage with allogenic bone grafts was used in 12 patients (group 2). Clinical outcomes were assessed by the visual analogue scale (VAS) scores and neurological status. Additionally, the serological results and the radiographic results using the sagittal Cobb angle were compared. Fusion was evaluated by computed tomography (CT) imaging at 24 months postoperatively. Results : Both groups showed a significant decrease in the postoperative mean VAS scores; however, only, group 1 patients showed a significantly higher VAS score than group 2 patients, 1 month postoperatively (p=0.002). The postoperative neurological status significantly improved. Elevated C-reactive protein levels and erythrocyte sedimentation rate values returned to normal limits at the 2-year follow-up without recurrent infection. No significant intergroup difference was observed in Cobb angle. Bony fusion was confirmed in all patients at CT 24 months postoperatively. Conclusion : Although the use of a metal cage with allogenic bone grafts for anterior column reconstruction remains controversial, our results suggest that it can be considered as an effective treatment of option for anterior column reconstruction in patients with infectious spondylitis.

• Membrane and Water Treatment
• /
• 제7권5호
• /
• pp.377-401
• /
• 2016

To study the effect of titanium dioxide ($TiO_2$) nanoparticles on membrane performance and structure and to explore possible improvement of using mixed solvents in the casting solution, composite polyvinylidene fluoride (PVDF) ultrafiltration membranes were prepared via immersion precipitation method using a mixture of two solvents triethyl phosphate (TEP) and dimethylacetamide (DMAc) and addition of $TiO_2$ nanoparticles. Properties of the neat and composite membranes were characterized using scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), Atomic force microscopy (AFM) and contact angle and membrane porosity measurements. The neat and composite membranes were further investigated in terms of BSA rejection and flux decline in cross flow filtration experiments. Following hydrophilicity improvement of the PVDF membrane by addition of 0.25 wt.% $TiO_2$, (from $70.53^{\circ}$ to $60.5^{\circ}$) degree of flux decline due to irreversible fouling resistance of the composite membrane reduced significantly and the flux recovery ratio (FRR) of 96.85% was obtained. The results showed that using mixed solvents (DMAc/TEP) with lower content of $TiO_2$ nanoparticles (0.25 wt.%) affected the sedimentation rate of nanoparticles and consequently the distribution of nanoparticles in the casting solution and membrane formation which influenced the properties of the ultimate composite membranes.

• 한국응용과학기술학회지
• /
• 제18권2호
• /
• pp.118-126
• /
• 2001

Micelle formation and adsorption at the $Ti0_{2}$ interface of a series of polystyrene-polythylene oxide(PS-PEO) block copolymer in aqueous solution was studied using fluorescence probing and small-angle X-ray methods. Further, the stability of aqueous $Ti0_{2}$ dispersion in the presence of copolymer was investigated by microelectrophoresis, optical density and sedimentation measurements. The dissolution of pyrene as fluorescent probe in aqueous surfactant solution leads to a slow decrease of the $I_{1}/I_{3}$ ratio, as the copolymer concentration increase; $I_{1}$ and $I_{3}$ are respectively the intensities of the first and third vibrionic peaks in the pyrene fluorescence emission. The behaviour was due to the characteristics of the copolymers and/or to the copolymer association efficiency in water. Moreover, the adsorption at the plateau level increases with decreasing PEO until chain length. The zeta potential of $TiO_{2}$ particles decreases with increasing copolymer concentration and reaches a plateau value. Finally, stabilization using block copolymers was more effective with samples having higher weight fractions of PS block.

• 해양환경안전학회지
• /
• 제24권1호
• /
• pp.119-125
• /
• 2018

입자기반 전산유체역학 기법은 유체역학에서의 라그란지안 접근법에 기반을 두고 있다. 입자기반 방식은 입자 각각이 물리량을 가지고 움직이며 이러한 입자의 움직임을 추적하는 방식으로 유체의 거동을 구현할 수 있다. 이러한 방식은 격렬한 움직임에 의한 자유표면 혹은 경계면의 운동 재현에 우수성이 있으나 연속체역학을 위반할 수 있다는 문제점 역시 포함하고 있다. 이를 반대로 말하자면 특별한 조치를 취하지 않는 경우에는 연속체가 아닌 물질에 대한 구현이 매우 쉽게 가능하다는 것이기도 하다. 이에 따라, 기존의 유체에서 사용되는 입자기반 전산해석방식을 지배방정식 단계에서부터 고체입자형으로 변형이 가능하다는 것을 알 수있다. 본 연구에서는 입자기반 전산해석방식을 고체입자에 알맞은 형태로 변환하였다. 변환을 위해 유체에서 사용되는 점성항을 제거하고 대신 마찰항을 추가하였다. 본 연구에서 개발된 고체입자형 전산해석 프로그램을 이용하여 고체입자의 붕괴를 구현하였으며 이를 유체입자 붕괴와의 비교를 통해 입증하였다. 또한 유체입자가 가질 수 없는 고체입자만의 특성인 안식각을 구현하여 고체입자를 위한 입자기반 전산해석 프로그램을 완성하였다.