• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.58-67
• /
• 2014

We investigated the mechanical properties of Korean red pine (Geumgangsong, Pinus densiflora forma erecta Uyeki) of Uljin province in Korea as a basic research to investigated the material properties. Compressive strength of Korean red pine was $36.2N/mm^2$, which was slightly lower than the pine (Pinus densiflora S. et Z.) in Korea. The compressive strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. Bending strength of Korean red pine was $76.5N/mm^2$, which was slightly higher than the pine (Pinus densiflora S. et. Z.) and nut pine (Pinus koraiensis) in Korea. Similar to the compressive strength, bending strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. On the other hand, the shearing strength showed the maximum value at part of including the pith. This result does not coincide with the results of compressive and bending strength, in consideration of the specific gravity, which is consistent. Surface hardness of Korean red pine was $43.7N/mm^2$ in cross section, $12.0N/mm^2$ in radial section and $13.7N/mm^2$ in tangential section respectively. The mechanical properties of Korean red pine were similar to the pine and nut pine having a similar specific gravity. The mechanical properties were greatly affected on the specific gravity than the annual ring width.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.4
• /
• pp.503-514
• /
• 2006

FBG sensors are capable of measuring the strain of structures easily and more durably than electric resistance gauges. Thus, many researches are dedicated to the application for the response monitoring or non-destructive evaluation of structures using FBG sensors. Additionally, the measured strains at the top and bottom of a cross-section can be transformed into the curvature of the section, which can be used to calculate its vertical displacement. Hence, this study aims to measure the dynamic strain signals of a steel section simply supported beam and to estimate the dynamic displacement from the strain signals, after which the estimated displacement is com pared with the measured displacement. The dynamic characteristics (natural frequency, damping ratio and mode shape) of the beam are predicted from both the estimated and measured displacement signals, and from the strain time history of the FBG sensors. The predicted properties are compared with those of an analytical model of the beam. The estimated displacement. However, the predicted dynamic properties from both the estimated displacements and the measured strains are well-correlated with those from the measured displacement. It is therefore appreciated that the estimation of the dynamic properties of FBG sensor signals is reasonable. Especially, the strain signal of the FBG sensor was amplified at a higher-frequency region in comparison with the displacement estimation with higher-mode properties.

• Honam Mathematical Journal
• /
• v.32 no.4
• /
• pp.625-632
• /
• 2010

The notions of commutative pre-logics and terminal sections are introduced. Characterizations of a commutative prelogic are provided. Properties of deductive systems in pre-logics which are upper semilattices are considered.

• East Asian mathematical journal
• /
• v.22 no.1
• /
• pp.53-59
• /
• 2006

We introduce the resistant length and examine its properties. And consider the applications of resistant length to the boundary behavior of conformal mappings. We obtain the theorems in the connection with the resistant length zero and the fundamental sequences. The method of resistant length leads a simple proofs of theorems.

• Journal of the Chungcheong Mathematical Society
• /
• v.11 no.1
• /
• pp.53-58
• /
• 1998

In this paper we study (positive) implicativeness of $BCK^{\star}(X^{\star})$, and investigate some properties of ideals in $BCK^{\star}(X)$.

• Journal of the Chungcheong Mathematical Society
• /
• v.18 no.2
• /
• pp.205-213
• /
• 2005

We introduce the conductance and examine its properties. We study the local behavior of quasiconformal mappings on the boundary of a domain $D{\subset}\overline{R}^n$ n and present some geometric applications of conductance.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.04a
• /
• pp.262-265
• /
• 1999

• Honam Mathematical Journal
• /
• v.29 no.3
• /
• pp.475-480
• /
• 2007

In this paper we find the point at which the rational B$\'{e}$zier curve has the given tangent direction. We also analyze the geometric properties of the point of quadratic rational B$\'{e}$zier curve.

• Journal of the Chungcheong Mathematical Society
• /
• v.26 no.1
• /
• pp.243-248
• /
• 2013

In this paper, we introduce the mathematical resistance and examine its properties and consider the applications of mathematical resistance to conformal mappings. We obtain the theorems in the connection with "the mathematical resistance zero" and "the fundamental sequences".

• Honam Mathematical Journal
• /
• v.33 no.3
• /
• pp.335-340
• /
• 2011

We study some properties of tangent lines of conic sections. As a result, we establish a characterization of conic sections.