• Fire Science and Engineering
• /
• v.26 no.1
• /
• pp.23-30
• /
• 2012

The temperature development of a structural element is dependent on section factor, which is estimated as a ratio of the fire-exposed perimeter to the cross-section area. Hence, with the higher section factor, the faster temperature development of the section os observed. Composite beam member, partially embedded asymmetry H beam, has a good fire resistance to the cross-section. The study was intended to conduct with change with section factor. The experimental result of section type which the Slim Beam Floor is bottom flange reinforced method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.1
• /
• pp.136-146
• /
• 2000

Although the urban elevated road is welcomed in modern society to deal with urban traffic problems, its negative influence on both the pedestrian environment and urban landscape has been frequently observed. Furthermore, the space under elevated structures has been ignored, being the lost space. Recently, several efforts have been devoted into bringing back the lostspace. However, any specific design guidelines shown in the street design of Japan and Singapore have not been suggested in Korea, yet. This study proposes a case of the Nengdong-Ro street design where the two-story urban elevated road is being constructed and negative effects of the elevated road are largely expected. One of the purposes of Nengdong-Ro street design proposed in this study is to relieve the negative effect os the two-story elevated road, and to provide a better pedestrian environment in Nengdong-Ro. The other purpose is to suggest general guidelines that can be applied to the similar context as Nengdong-Ro. It is considered that the space under the elevated road generally consist of three sections: 1) main section where the elevated road runs parallel with the ground, 2) landing section where elevated road goes down to the ground, and 3) facility section where facilities such as the platform and the ticketing booth are located. The design guidelines are suggested for each section, because each section has a different situation. Plans, section and elevations and the details of the street furniture are also incorporated to support the design guidelines.

• Journal of the Korean Society of Safety
• /
• v.23 no.3
• /
• pp.58-64
• /
• 2008

In order to identify the exact behavior of corbel section, the horizontal force acting on corbel section should be considered as well as the vertical force. In this study, a new corbel section, which is economical and easy to construct, is developed by evaluating the exact strength of the section. Experiments were performed to verify the strengths of the proposed sections comparing with those of the currently used section. The summary of the experiment results are as follows: 1) In order to minimize the horizontal force effect, it was found that the use of pre-stressing was most effective, and that TB type corbel section is a most efficient section in terms of economy and workability. 2) The experimentally obtained strength of corbel section matched well with that estimated using shear friction theory. Therefore, it is concluded that shear friction theory would be very useful if a precise crack angie in the corbel section, which is pre-stressed by PS strings and threaded bolts, is available.

• Women's Health Nursing
• /
• v.8 no.3
• /
• pp.389-401
• /
• 2002

This study aims to find factors that affect variations in cesarean section frequency rates among OBGY clinics in Metropolitan areas. The factors include patient, medical supplier characteristics and economic factors. This study is a cross-sectional analysis using health insurance delivery claims from July to December 2000 and files of the NHIC(national health insurance corporation). Multiple regression was used to analyze the dependent variable of cesarean section frequency rate at each clinic. The results are as follows : Cesarean section frequency rate is increasing in proportion to the number of the following patients : repeated caesarean section, disproportion, obstructed labour, fetal distress, emergency caesarean section and self-employed patients. There are geographic variations as well. Cesarean section frequency rates are higher in Inchon and Gyonggi province than in Seoul. The higher number of total delivery the clinic has, the lower rate of cesarean section it has. Clinics with high frequency rates in 1999 showed higher rates the next year. Further research is required to develop evidence based delivery modes and change strategies for increasing normal delivery and activating midwife clinics.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.12 no.2
• /
• pp.1965-1970
• /
• 1970

The experiment was carried out in order to improve the leakage stopping work in the irrigation canal founding on the porous soil. But the experiment had many problems to be studied more owing to the insufficient time and facilities. The results obtained are summarized as follows; 1. Polyethylene film is estimated not to make strength decrease owing to buring in the subsoil, but to make owing to the sunlight. 2. Coated nylon shows the tendency to deteriorate strength when it is buried in the earth or exposed to the sun for long time, but leakage is all but impermeability generally. 3. Leakage loss rates for one hour show some differences in the canal to be full with water in accordance with operating methods, that is, the clay lining section is 12.6%, the coated nylon lining section is 1.7%, the polyethylene film lining section is 1.3%, respectively. 4. Leakage quantities per wetted perimeter unit area show $3.556cc/cm^2/hr$. in the clay lining section, $1.574cc/cm^2/hr$. in the coated nylon section, $0.695cc/cm^2/hr$. in the polyethylene film lining section, respectively. 5. When the construction fund make the clay lining section as a standard, the polyethylene film section is 92.1%, the coated nylon section is 174.2%, respectively. But, the unit cost of execution may be low when the polyethylene film and the coated nylon will enable to mass-produce for the purpose of execution.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.49-53
• /
• 1994

Advanced Real-Time Satellite Simulator(ARTSS) has been developed to support the telemetry, tracking and command operations of the ETRI satellite control system and to provide satellite engineers a more powerful and informative satellite simulations tool on the desktop. To provide extensive simulation functions for a communication satellite system in the pre-operational and operational missions, ARTSS uses a geosynchronous orbit(GEO) satellite model consisting of the attitude and orbit control subsystem, the power subsystem, the thermal subsystem, the telemetry, command and ranging subsystem, and the communications payload subsystem. In this paper, the system features and functions are presented and the satellite subsystem models are explained in detail.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.447-452
• /
• 2000

In this study, the design of Free-Fall Simulator was carried out using concept of vertical wind tunnel. Free-Fall Simulator is not an experimental equipment but a training equipment. Therefore Free-Fall Simulator needs a large training section compared with test section of wind tunnel and has critical limit of height. These limits bring about the difficulty of design for a return passage. Due to small area ratio, the downstream flow of training section with high speed is not decelerated adequately to the fan section. High-speed flow leads to great losses in the small area ratio diffuser and corner. So design of diffusers and corners located between training section and fan section has a great effect on the Free-Fall Simulator performance. This study used an estimation method of subsonic wind tunnel performance. It considered each section of Free-Fall Simulator as an independent section. Therefore loss of one section didn't affect loss of other sections. Because losses of corner with vane and $1^{st}$ diffuser are most parts of overall Free-Fall Simulator, this study focused on the design of these sections.

• Korean Journal of Microbiology
• /
• v.38 no.1
• /
• pp.7-12
• /
• 2002

The intergenic spacer (IGS) region of the ribosomal DNA of species in Fusarium section Liseola was analyzed by amplification and subsequent digestion with several restriction enzymes. The length of the amplified IGS region was about 2.6 Kb in all strains except F.moniliforme 12 Which was about 2.9 Kb. The enzymes, EcoRI, HincII, SalI, HindIII, PstI and SmaI, digested the IGS region and nine haplotypes were identified among 11 strains. In the dendrogram based on PCR-RFLP of IGS region combined the results of section Liseola in this study and section Elegans in previous study, variation in the IGS appears to offer considerable potential to resolve intraspecific relationship as well as interspecies or intersection.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.3
• /
• pp.30-35
• /
• 2011

This study investigates the optimum section properties of newly developed steel-concrete composite beam. For that purpose we developed computer program calculating section properties. The suggested new beam section highly contribute to save inter-story height and reduce construction duration and cost compared with conventional steel works such as H-beam and column + RC slab system. But the section shape have different section modulus with upper and lower fiber because of the unsymmetric cross section. Therefore the parametric study on thickness-ratio of top and bottom flange plate is needed. In this paper the change of neutral axis and section modulus for thickness-ratio of up and down flage plate is analysed and discussed.

• Wind and Structures
• /
• v.28 no.4
• /
• pp.203-213
• /
• 2019

The topography and geomorphology are complex and changeable in western China, so the railway transition section is common. To investigate the aerodynamic effect of the subgrade-tunnel transition section, including a cutting-tunnel transition section, an embankment-tunnel transition section and two typical scenarios for rail infrastructures, is selected as research objects. In this paper, models of standard cutting, embankment and CRH2 high-speed train with the scale of 1:20 were established in wind tunnel tests. The wind speed profiles above the railway and the aerodynamic forces of the vehicles at different positions along the railway were measured by using Cobra probe and dynamometric balance respectively. The test results show: The influence range of cutting-tunnel transition section is larger than that of the embankment-tunnel transition section, and the maximum impact height exceeds 320mm (corresponding to 6.4m in full scale). The wind speed profile at the railway junction is greatly affected by the tunnel. Under the condition of the double track, the side force coefficient on the leeward side is negative. For embankment-tunnel transition section, the lift force coefficient of the vehicle is positive which is unsafe for operation when the vehicle is at the railway line junction.