• 한국광물학회지
• /
• 제26권4호
• /
• pp.219-228
• /
• 2013

방사성 폐기물을 지하에 장기 보관하는 금속 용기에 관한 생지화학적 부식 특성을 알아보기 위해 주철과 구리로 된 금속재료를 환원조건 하에서 디설프리칸스 황산염환원미생물과 3개월간 반응시켰다. 금속재료의 화학적/광물학적 변화를 알아보기 위해 주기적으로 용존 금속이온들의 농도를 측정하였으며, 실험이 종료된 이후 금속 시편 및 표면 이차생성물들을 전자현미경을 이용하여 분석하였다. 디설프리칸스가 없는 조건에서는 금속재료의 부식이 매우 미약하였으나, 미생물이 있는 경우에는 부식이 상대적으로 컸다. 관찰된 생지화학적 부식 산물은 주로 맥키나와이트와 황화구리 같은 검은색의 금속황화물이었으며, 표면에서 쉽게 분리되거나 콜로이드화되어 부유하였다. 특히, 구리 시편의 경우 용액 상에 용존 철이 존재할 때 세균에 의한 구리 부식의 가속화가 관찰되었는데, 이는 구리 표면에 다른 종의 황화철이 성장하면서 구리 간의 결속력을 약화시켰기 때문인 것으로 보인다.

• Applied Microscopy
• /
• 제40권2호
• /
• pp.81-88
• /
• 2010

변태중인 참개구리(Rana nigromaculata) 유생의 상피에서 세포자멸사가 초래된 세포를 확인하고 이들의 핵과 세포질에서 나타나는 퇴행과정의 미세구조 변화를 TUNEL 염색법과 투과전자현미경 관찰을 통해 분석하였다. 꼬리의 퇴화가 진행되는 Shumway 발생단계 31기부터 33기까지의 유생 상피는 다층의 입방형세포로 이루어져 있었고, TUNEL 염색으로 관찰한 결과, 상피 전역에 걸쳐 광범위한 세포자멸사가 진행되고 있음을 확인할 수 있었다. 자멸사에 의해 초래되는 상피세포의 초기 변형은 먼저 핵에서 관찰되었는데, 염색질이 응축되어 핵막 주변부로 편재되었고 핵의 분절과 세포질의 응축, 그리고 세포막의 변형이 뒤따르는 것으로 확인되었다. 이어서 세포질의 분절에 의해 자멸소체가 형성되었는데 막으로 둘러싸인 소체 내부에서는 비교적 잘 보존된 형태의 세포소기관들이 관찰되었다. 자멸사가 초래된 세포들은 상피내 대식세포(intraepithelial macrophage)로 추정되는 인접 세포들에 의해 탐식되어 잔여소체를 형성하였으며, 급속한 퇴화과정을 거쳐 층판구조를 지닌 소포의 형태로 변형된 후 세포질에서 소멸됨이 확인되었다.

• 전기화학회지
• /
• 제10권1호
• /
• pp.20-24
• /
• 2007

최근 높은 에너지 밀도를 갖고 있는 리튬 이온 이차전지에 대한 관심이 높다. 리튬 이온 이차전지는 이미 휴대용 기기로 널리 적용되고 있으며, 하이브리드 전기자동차와 같은 고출력 전지시스템에 적용을 위해 연구되고 있다. 리튬 이온 이차전지의 전극 소재는 리튬 이온의 이동에 의해서 충전 및 방전되는 현상을 활용한다. 전극으로부터 리튬 이온이 이동될 때 전극내의 구조 변화가 발생한다. 전극의 구조분석은 중성자 또는 X-선을 이용하여 분석할 수 있다. X-선은 분석 시간이 짧고, 쉽게 분석할 수 있다는 장점이 있으나 원자내의 전자구름과의 산란을 응용하므로 전자가 적은 가벼운 원소의 경우 분석이 어려운 단점이 있다. 리튬도 원자량이 작아서 X-선 만으로는 리튬의 정확한 위치에 대한 분석이 어렵다. 중성자 분석기술은 이에 대한 해답이 될 것이다. 본 자료에서는 중성자를 활용한 전극물질의 구조 분석 사례 및 그 원리에 대해서 논의하고자 한다.

• 한국재료학회지
• /
• 제30권9호
• /
• pp.465-473
• /
• 2020

For surface hardening of a continuous casting mold component, a fundamental metallurgical investigation on dissimilar laser clads (Cu-NiCrBSi) is performed. In particular, variation behavior of microstructures and mechanical properties (hardness and wear resistance) of dissimilar clads during long-term service is clarified by performing high-temperature post-clad heat treatment (temperature range: 500 ~ 1,000 ℃ and isothermal holding time: 20 ~ 500 min). The microstructures of clad metals (as-clads) consist of fine dendrite morphologies and severe microsegregations of the alloying elements (Cr and Si); substrate material (Cu) is clearly confirmed. During the post-clad heat treatment, the microsegregations are totally homogenized, and secondary phases (Cr-based borides and carbides) precipitated during the short-term heat treatment are also almost dissolved, especially at the heat treatment conditions of 950 ℃ for 500 min. Owing to these microstructural homogenization behaviors, an opposite tendency of the surface mechanical properties can be confirmed. In other words, the wear resistance (wear rate) improves from 4.1 × 10^-2 ㎣/Nm (as-clad condition) to 1.4 × 10^-2 ㎣/Nm (heat-treated at 950 ℃ for 500 min), whereas the hardness decreases from 453 HV (as-clad condition) to 142 HV (heat-treated at 950 ℃ for 500 min).

• Corrosion Science and Technology
• /
• 제15권4호
• /
• pp.182-188
• /
• 2016

Significant piping wall thinning caused by Flow-Accelerated Corrosion (FAC) and Erosion-Corrosion (EC) continues to occur, even after the Mihama Power Station unit 3 secondary pipe rupture in 2004, in which workers were seriously injured or died. Nuclear power plants in many countries have experienced FAC and EC-related cases in steam cycle piping systems. Korea has also experienced piping wall thinning cases including thinning in the downstream straight pipe of a check valve in a feedwater pump line, the downstream elbow of a control valve in a feedwater flow control line, and failure of the straight pipe downstream of an orifice in an auxiliary steam return line. Cause analyses were performed by reviewing thickness data using Ultrasonic Techniques (UT) and, Scanning Electron Microscope (SEM) images for the failed pipe, and numerical simulation results for FAC and EC cases in Korea Nuclear Power Plants. It was concluded that the main cause of wall thinning for the downstream pipe of a check valve is FAC caused by water vortex flow due to the internal flow shape of a check valve, the main cause of wall thinning for the downstream elbow of a control valve is FAC caused by a thickness difference with the upstream pipe, and the main cause of wall thinning for the downstream pipe of an orifice is FAC and EC caused by liquid droplets and vortex flow. In order to investigate more cases, additional analyses were performed with the review of a lot of thickness data for inspected pipes. The results showed that pipe wall thinning was also affected by the operating condition of upstream equipment. Management of FAC and EC based on these cases will focus on the downstream piping of abnormal or unusual operated equipment.

• Corrosion Science and Technology
• /
• 제11권3호
• /
• pp.96-102
• /
• 2012

0.1 M NaOH 용액에 PbO첨가양이 증가함에 따라 Alloy 600에 형성되는 산화막의 부동태 피막 특성이 열화되었다. 또한 뚜렷한 2중층 구조의 산화막이 점차 사라지고, 산화막내 존재하는 납의 양이 증가하였다. 산화막 내부 납의 양이 증가함에 따라 산화막 내부 니켈의 결핍이 점차 커졌다. 납에 의해 산화막의 부동태 특성이 약화됨에 따라, 응력부식균열 저항성 또한 급감하였을 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.471-476
• /
• 2014

A kinetic study on aminolysis of 2-chloro-4-nitrophenyl X-substituted-benzoates (2a-k) in 80 mol % $H_2O/_20mol%$ DMSO at $25.0^{\circ}C$ is reported. The Br${\emptyset}$nsted-type plot for the reactions of 2-chloro-4-nitrophenyl benzoate (2g) with a series of cyclic secondary amines curves downward (e.g., ${\beta}_1=0.25$, ${\beta}_2=0.85$ and $pK_a^o=10.3$), which is typical of reactions reported to proceed through a stepwise mechanism with a change in ratedetermining step (RDS). The Hammett plot for the reactions of 2a-k with piperidine consists of two intersecting straight lines, while the corresponding Yukawa-Tsuno plot exhibits an excellent linear correlation with ${\rho}_X=1.15$ and r = 0.59. Thus, it has been concluded that the nonlinear Hammett plot is not due to a change in RDS but is caused by stabilization of substrates through resonance interactions between the electron-donating substituent and the C=O bond. Substrates possessing a substituent at the 2-position of the leaving aryloxide deviate negatively from the curved Br${\emptyset}$nsted-type plot for the reactions of Y-substituted-phenyl benzoates (3a-i), implying that the steric hindrance exerted by the substituent at the 2-position is an important factor which governs the reactivity of Y-substituted-phenyl benzoates.

• 한국재료학회지
• /
• 제14권4호
• /
• pp.293-299
• /
• 2004

Transition metal ions doped $TiO_2$ nanostructured powders were prepared with simply heating aqueous $TiOCl_2$ solutions, contained various metal ions (Ni, Al, Fe, Zr, and Nb) of 1.47 mol% added as metal-chlorides, at $100^{\circ}C$ for 4 hrs by homogeneous precipitation process under suppressing conditions of water vaporization. The characterizations for prepared $TiO_2$ powders were carried out to observe doping of metal ions, their concentrations and microstructures using XRD, UV-VIS (DRS), XPS, SEM, TEM and ICP. Also, photo-oxidative abilities were evaluated by decomposition of 4-chlorophenol (4CP) under ultraviolet light irradiations. No secondary oxide phases were formed in all the $VTiO_2$ powders, showing doping with various transition metal ions. When adding ions ($Ni^{2+}$ or$ Al^{3+ }$ and $Zr^{4+}$ ) having valance states or ionic radii greatly different from those of $Ti^{4+}$ , the $TiO_2$ powders of mixed anatase and rutile phases were formed, whereas in the case of additions of $^Fe{3+ }$ and $Nb^{ 5+}$ as well as no addition of metal ion the powders with pure rutile phase alone were formed. Among the prepared $TiO_2$ powders, Ni$^{2+}$ doped $TiO_2$ powders, containing a small amount of anatase phase, showed excellent photo-oxidative ability in 4CP decomposition because of relative decreases in electron-hole recombination and poisoning of $TiO_2$ surface during the photoreaction.n.

• 한국재료학회지
• /
• 제18권8호
• /
• pp.422-426
• /
• 2008

The effects of an addition of $ZrO_2$ on the microstructure and electrical properties of MgO films as a protective layer for AC plasma display panels were investigated. MgO + a 200 ppm $ZrO_2$ protective layer prepared by e-beam evaporation exhibited a secondary electron emission coefficient ($\gamma$) that was improved by 21% compared to that of a pure MgO protective layer. The relative density and Vickers hardness increased with a further addition of $ZrO_2$. These results suggest that the discharge properties and optical properties of MgO protective layers are closely related to the relative density and Vickers hardness. The good optical and electrical properties of $\gamma$, at 0.080, a grain size of $19\;{\mu}m$ and an optical transmittance of 91.93 % were obtained for the MgO + 200 ppm $ZrO_2$ protective layer sintered at $1700^{\circ}C$ for 5 hrs.

• 한국동물위생학회지
• /
• 제35권3호
• /
• pp.197-205
• /
• 2012

Despite of a long history of the sulfur on the disease healing effect, there were limited ways of applying sulfur to animal and human. We have developed the detoxified sulfur (non toxic sulfur) method to make it practical and mass production possible through laboring for many years. This study practiced scanning electron microscope (SEM), Energy dispersive X-ray spectrometer (EDS) and secondary ion mass spectrometry (SIMS) analysis to investigate the physicochemical aspect of detoxified sulfur. We also performed the oral toxicity experiment to mice, and anti-bacterial test of the detoxified sulfur. Based on the SEM, EDS and SIMS results, the united particles in the mass form with the similar component intensity with the raw sulfur were observed, and hydrogen sulfide ion (HS-) component which is regarded as a toxic matter, was decreased after detoxification. Indeed, toxicity test on the mice (10 males, 10 females) showed no clinical, histopathological changes with the 5 times amount (2,500 mg/kg) of the actual doses. However, the male-mice showed decreased in body weight by 23.6%, 24.3% in the 7th, 14th day, respectively, after detoxified sulfur. Moreover, the female-mice administered the detoxified sulfur showed decreased in body weight by 28.7% (P<0.05) than that in the control group on the 14th day. The result of antibacterial test on the detoxified sulfur showed antibacterial effect (27%) to inhibit the growth of Staphylococcus aureus. It is shown that detoxified sulfur can be used as feed additive and has an affect on the farm perfomance.