• 한국공간구조학회논문집
• /
• 제3권1호
• /
• pp.35-46
• /
• 2003

Conventional analysis and design of steel structures are performed using the assumption of a either fully rigid or pinned. However, every steel connection lies in between fully rigid and pinned connection. So, It is important to consider the connection for steel structure design. In this paper Computer-based second-order elastic analysis is used to calculate one story two bay and two story three bay for steel structures with semi-rigid connection. Genetic Algorithms(GAs) and Sequential Unconstrained Minized Technique(SUMT) dynamic programming is used to the method for optimum design of steel structures. The efficiency and validity of the developed continuous and discrete optimum design algorithm was verified by applying the algorithm to optimum design examples.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권5호
• /
• pp.873-887
• /
• 2015

The springing response of a large blunt ship was considered to be influenced by a second order interaction between the incoming irregular wave and the blunt geometry of the forebody of the ship. Little efforts have been made to simulate this complicated fluid-structure interaction phenomenon under irregular waves considering the second order effect; hence, the above mentioned premise still remains unproven. In this paper, efforts were made to quantify the second order effect between the wave and vibrating flexible ship structure by analyzing the experimental data obtained through the model basin test of the scaled-segmented model of a large blunt ship. To achieve this goal, the measured vertical bending moment and the wave elevation time history were analyzed using a higher order spectral analysis technique, where the quadratic interaction between the excitation and response was captured by the cross bispectrum of two randomly oscillating variables. The nonlinear response of the vibrating hull was expressed in terms of a quadratic Volterra series assuming that the wave excitation is Gaussian. The Volterra series was then orthogonalized using Barrett's procedure to remove the interference between the kernels of different orders. Both the linear and quadratic transfer functions of the given system were then derived based on a Fourier transform of the orthogonalized Volterra series. Finally, the response was decomposed into a linear and quadratic part to determine the contribution of the second order effect using the obtained linear and quadratic transfer functions of the system, combined with the given wave spectrum used in the experiment. The contribution of the second order effect on the springing response of the analyzed ship was almost comparable to the linear one in terms of its peak power near the resonance frequency.

• 한국전산유체공학회지
• /
• 제14권4호
• /
• pp.13-22
• /
• 2009

A two-phase (gas and liquid) flow analysis solver, named CUPID, has been developed for a realistic simulation of transient two-phase flows in light water nuclear reactor components. In the CUPID solver, a two-fluid three-field model is adopted and the governing equations are solved on unstructured grids for flow analyses in complicated geometries. For the numerical solution scheme, the semi-implicit method of the RELAP5 code, which has been proved to be very stable and accurate for most practical applications of nuclear thermal hydraulics, was used with some modifications for an application to unstructured non-staggered grids. This paper is concerned with the effects of interpolation schemes on the simulation of two-phase flows. In order to stabilize a numerical solution and assure a high numerical accuracy, the second-order upwind scheme is implemented into the CUPID code in the present paper. Some numerical tests have been performed with the implemented scheme and the comparison results between the second-order and first-order upwind schemes are introduced in the present paper. The comparison results among the two interpolation schemes and either the exact solutions or the mesh convergence studies showed the reduced numerical diffusion with the second-order scheme.

• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.117-126
• /
• 2002

본 논문에서는 횡비틀림좌굴을 고려하는 2차 소성힌지해석법을 이용하여 3차원 강뼈대구조물의 설계기법을 개발하였다. 본 해석은 구조시스템 및 개별부재의 재료적 기하학적 비선형 거동을 고려한다. 더욱이, 종래의 2차 소성힌지해석에서 횡비틀림좌굴효과에 의한 휨강도 감소효과를 고려하지 못한 문제를 해결하였다. 강뼈대구조물의 잔류응력과 휨에 의한 비선형성 및 기하학적 불완전성에 의한 점진적인 소성화효과를 고려하는 효율적인 방법을 기술하였다. 횡비틀림좌굴효과를 고려하기 위하여 비지지장 및 단면 형상으로 구성되는 침강도 감소모델을 사용하였다. 개발된 2차 소성힌지해석법을 LRFD 설계방법과 비교함으로서 검증하였다. 예제해석을 통하여 횡비틀림좌굴효과는 2차 소성힌지해석법에 고려해야 할 중요한 요소임을 알 수 있었다. 본 해석은 실제 설계에 활용할 수 있는 효율적이고 신뢰성 있는 방법이다.

• 한국유통학회지:유통연구
• /
• 제1권1호
• /
• pp.239-258
• /
• 1996

This study deals with the measurement of relational norms, a safeguard for sustained exchange relationshipsim marketing channel systems. Here, the relational norm items are hypothesized to have a second-order factor model, in which mine observed items originate from the three first-order factors and the first order factors in turn originate from a second-order factor. The three first order construe comprising a higher order norm are mutuality(equity in the distribution of benefits and burdens over the course of the exchange on a long term basis), flexibility(expectation of friendly adaption for possible circumstance changes), and solidarity (the degree to which the preservation of the unique and continuing relationship is internalized by the exchange partners as being important in and of itself). 113 research questionnaires are obtained from four industries such as construction, telecommunication, iron, and electric ＆ electronic industries, Reliability and nomological. discriminant validity are tested, and in using the confirmatory factor analysis of Lisrel 7.16, and the chi-square difference test it is tested which has a better satisfactory fit to the data, the first-order model or the second-order one. The results of this study indicates that relational norms have a second order construct. In the electric and electronic industry the model as a while has a satisfactory fit to the data and the relevant first- and second-order factor loading to the mutuality is not significant. Same Results are happened to the flexibility in the telecommunication industry and to the mutuality and flexibility in the inn industry. In sum, the model lends support to our construct, but it is difficult to apply the measurement model to all kinds of industries.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.955-958
• /
• 2001

본 논문에서는 비동기 CDMA 시스템에서 다중접속에 의한 간섭을 제거하는 역상관기 중에서 반복 연산을 사용하여 계산량을 개선한 second-order stationary 기반의 반복적 역상관기와 수렴특성에 대하여 이론적으로 분석하고 모의실험을 통하여 성능을 검증하였다. 먼저 반복적 역상관기에서 수렴특성을 결정하는 수렴 인자를 유도하고 가장 빠른 수렴 특성을 보장하는 최적의 수렴상수를 상관행렬의 최대 및 최소 고유값으로 나타낼 수 있음을 증명하였다. 또한 최적의 수렴 상수와 반복회수에 따른 BER이 기존의 역상관기와 비슷한 성능을 가짐을 보였다.

• Nonlinear Functional Analysis and Applications
• /
• 제26권1호
• /
• pp.65-70
• /
• 2021

We characterize the solution set for a second-order cone linear fractional optimization problem (P). We present sequential Lagrange multiplier characterizations of the solution set for the problem (P) in terms of sequential Lagrange multipliers of a known solution of (P).

• Nonlinear Functional Analysis and Applications
• /
• 제26권4호
• /
• pp.649-662
• /
• 2021

Recently the author studied a one-parameter family of divergences and considered the related median minimization problem of finite points over these divergences in general symmetric cones. In this article, to utilize the results practically, we deal with a special symmetric cone called second order cone, which is important in optimization fields. To be more specific, concrete computations of divergences with its gradients and the unique minimizer of the median minimization problem of two points are provided skillfully.

• Steel and Composite Structures
• /
• 제21권5호
• /
• pp.1121-1144
• /
• 2016

This paper presents a displacement-based finite element procedure for second-order distributed plasticity analysis of planar steel frames with semi-rigid beam-to-column connections under static loadings. A partially strain-hardening elastic-plastic beam-column element, which directly takes into account geometric nonlinearity, gradual yielding of material, and flexibility of semi-rigid connections, is proposed. The second-order effects and distributed plasticity are considered by dividing the member into several sub-elements and meshing the cross-section into several fibers. A new nonlinear solution procedure based on the combination of the Newton-Raphson equilibrium iterative algorithm and the constant work method for adjusting the incremental load factor is proposed for solving nonlinear equilibrium equations. The nonlinear inelastic behavior predicted by the proposed program compares well with previous studies. Coupling effects of three primary sources of nonlinearity, geometric imperfections, and residual stress are investigated and discussed in this paper.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제14권2호
• /
• pp.93-111
• /
• 2010

The purpose of this paper is to obtain new complexity results for a second-order cone optimization (SOCO) problem. We define a proximity function for the SOCO by a kernel function. Furthermore we formulate an algorithm for a large-update primal-dual interior-point method (IPM) for the SOCO by using the proximity function and give its complexity analysis, and then we show that the new worst-case iteration bound for the IPM is $O(q\sqrt{N}(logN)^{\frac{q+1}{q}}log{\frac{N}{\epsilon})$, where $q{\geqq}1$.