• 제목/요약/키워드: SecY

검색결과 5,777건 처리시간 0.035초

유해 할로겐화 탄화수소 폐기물 처리를 위한 열분해 반응 (Pyrolysis Reaction for the Treatment of Hazardous Halogenated Hydrocarbon Waste)

  • 조완근
    • 한국환경과학회지
    • /
    • 제6권4호
    • /
    • pp.399-407
    • /
    • 1997
  • The pyrolysis reactions of atomic hydrogen with chloroform were studied In a 4 cm 1.6. tubular flow reactor with low flow velocity 1518 cm/sec and a 2.6 cm 1.4. tubular flow reactor with high flow velocity (1227 cm/sec). The hydrogen atom concentration was measured by chemiluminescence titration with nitrogen dioxide, and the chloroform concentrations were determined using a gas chromatography. The chloroform conversion efficiency depended on both the chloroform flow rate and linear flow velocity, but 416 not depend on the flow rate of hydrogen atom. A computer model was employed to estimate a rate constant for the initial reaction of atomic hydrogen with chloroform. The model consisted of a scheme for chloroform-hydrogen atom reaction, Runge-Kutta 4th-order method for Integration of first-order differential equations describing the time dependence of the concentrations of various chemical species, and Rosenbrock method for optimization to match model and experimental results. The scheme for chloroform-hydrogen atom reaction Included 22 elementary reactions. The rate constant estimated using the data obtained from the 2.6 cm 1.4. reactor was to be 8.1 $\times$ $10^{-14}$ $cm^3$/molecule-sec and 3.8 $\times$ $10^{-15}$ cms/molecule-sec, and the deviations of computer model from experimental results were 9% and 12% , for the each reaction time of 0.028 sec and 0.072 sec, respectively.

  • PDF

구상흑연주철의 Mn성분과 펄라이트-베이나이트변태 처리의 변화가 미세조직에 미치는 영향 (Changes of Microstructure due to Mn Element and Pearlite-Bainite Transformation Treatment in Ductile Cast Iron)

  • 서관수;예병준
    • 한국주조공학회지
    • /
    • 제12권3호
    • /
    • pp.230-237
    • /
    • 1992
  • The purpose of present investigation is to obtain ductile cast iron with ferrite-bainite matrix by pearlite-bainite transformation treatment. Ductile cast irons having three kinds of Mn ampunt had been manufactured. Mn increased pearlite volume fraction iin as-cast ductile cast iron. Ductile cast irons of different pearlite fraction were austenitized at $875\;^{\circ}C$ for 230-350 sec or $925\;^{\circ}C$ for 130-170 sec followed by austempering at $300\;^{\circ}C$ or $400\;^{\circ}C$ for the various periods of time from 5 to 30 min. When specimen was austenitixed for 130 sec at $925\;^{\circ}C$ and for 230 sec at $875\;^{\circ}C$, pearlite was transformed into austenite. Bainite around graphite was found at $925^{\circ}C$ for 170 sec. Bainite in grain boundary of ferrite was happened at $875^{\circ}C$ for 350 sec. During the austempering process, acicular bainite was precipitated at $300^{\circ}C$ and lath bainite was precipitated at $400^{\circ}C$. Increment in manganese content restrained bainitic transformation. Retained austenie was of little quantity.

  • PDF

Modeling and performance evaluation of a piezoelectric energy harvester with segmented electrodes

  • Wang, Hongyan;Tang, Lihua;Shan, Xiaobiao;Xie, Tao;Yang, Yaowen
    • Smart Structures and Systems
    • /
    • 제14권2호
    • /
    • pp.247-266
    • /
    • 2014
  • Conventional cantilevered piezoelectric energy harvesters (PEHs) are usually fabricated with continuous electrode configuration (CEC), which suffers from the electrical cancellation at higher vibration modes. Though previous research pointed out that the segmented electrode configuration (SEC) can address this issue, a comprehensive evaluation of the PEH with SEC has yet been reported. With the consideration of delivering power to a common load, the AC outputs from all segmented electrode pairs should be rectified to DC outputs separately. In such case, theoretical formulation for power estimation becomes challenging. This paper proposes a method based on equivalent circuit model (ECM) and circuit simulation to evaluate the performance of the PEH with SEC. First, the parameters of the multi-mode ECM are identified from theoretical analysis. The ECM is then established in SPICE software and validated by the theoretical model and finite element method (FEM) with resistive loads. Subsequently, the optimal performances with SEC and CEC are compared considering the practical DC interface circuit. A comprehensive evaluation of the advantageous performance with SEC is provided for the first time. The results demonstrate the feasibility of using SEC as a simple and effective means to improve the performance of a cantilevered PEH at a higher mode.

수문변화 지표법에 의한 다목적댐의 유량변화 분석 (Hydrologic Regime Alteration Analysis of the Multi-Purpose Dam by Indicators of Hydrologic Alterations)

  • 박봉진;강기호;정관수
    • 한국수자원학회논문집
    • /
    • 제41권7호
    • /
    • pp.711-723
    • /
    • 2008
  • 본 연구에서는 수문변화 지표법을 적용하여 11개 주요 다목적댐의 월 유량 크기, 연 최소.최대유량 크기와 지속기간, 고.저맥파 빈도와 주기, 수문곡선 변화 비율과 빈도를 분석하였다. 월 유량변화 분석 결과, 갈수기에 해당하는 1월부터 6월과 10월부터 12월까지는 유입량이 $6.38m^3/sec{\sim}39.84m^3/sec$이었으나, 방류량은 $20.36m^3/sec{\sim}49.43m^3/sec$$1.84%{\sim}200.98%$가 증가하였다. 우기철인 7월부터 9월까지는 유입량이 $79.06m^3/sec{\sim}137.12m^3/sec$ 이었으나, 방류량은 $65.32m^3/sec{\sim}80.16m^3/sec$$18.19%{\sim}40.39%$가 감소하였다. 연 최소.최대 유량변화 분석 결과는 1일 최소유량이 $82.86%{\sim}2,950%$가 증가하였으며, 연 최소 및 최대 유량변화는 1일 최소유량은 $82.86%{\sim}2,950%$가 증가하였으나, 1일 최대유량은 $34.78%{\sim}83.96%$가 감소하였다. 고.저맥파의 빈도와 주기의 분석 결과, 저맥파의 발생 횟수는 댐 조절후 $29.67%{\sim}99.07%$가 감소하였으며, 고맥파의 발생횟수도 $4.6%{\sim}92.35%$가 감소하였다. 수문곡선 변화 비율과 빈도의 분석 결과 상승률은 $15.84%{\sim}79.31%$가 감소하였으며, 하강율은 $1.97%{\sim}107.10%$가 감소하였다. 유량변화정도 분석 결과는 1일 최소유량은 $0.60{\sim}2.67$ 증가하였으며, 1일 최대 유량은 $0.50{\sim}1.00$으로 감소하였다.

아이트래커를 이용한 모니터 글자 대비도에 따른 눈의 피로도 연구 (The Study of Visual Fatigue by Monitor Letter Contrast with an Eye Tracker)

  • 김하림;정주현
    • 한국안광학회지
    • /
    • 제19권4호
    • /
    • pp.533-538
    • /
    • 2014
  • 목적: 모니터 글자 대비 변화에 따른 눈의 피로도를 측정하여 모니터 글자 대비도와 눈의 피로도의 연관성에 대해 연구하고자 하였다. 방법: 최대교정시력 1.0 이상의 피검자 53명(평균연령 $22.68{\pm}1.85$) 중 읽기속도 검사에 통과한 45명(평균연령 $22.68{\pm}1.85$)을 대상으로 각각 Black(대비 100%), Dark gray(대비 80%), Gray(대비 60%), Light gray(대비 30%) 글자로 이루어진 4가지 시표를 무작위로 읽도록 하였다. 피검자가 시표를 읽는 동안 아이트래커로 피검자의 안구를 추적하여 모니터 글자 대비에 따른 피검자의 눈의 피로도의 변화를 측정하였다. 결과: 피검자들의 평균측정시간은 Black, Dark gray, Gray, Light gray에서 33.635 sec, 32.266 sec, 33.936 sec, 34.848 sec로 측정되었다. 평균안구고정시간은 Black, Dark gray, Gray, Light gray에서 0.224 sec, 0.218 sec, 0.239 sec, 0.243 sec로 측정되었다. 평균동공크기는 Black, Dark gray, Gray, Light gray에서 41.133 mm, 41.160 mm, 40.880 mm, 40.459 mm로 측정되었다. 평균 눈깜박임 빈도수는 Black, Dark gray, Gray, Light gray에서 0.211 blinks/sec, 0.206 blinks/sec, 0.221 blinks/sec, 0.238 blinks/sec로 측정되었다. 결론: 피검자들의 평균측정시간과 평균안구고정시간은 Dark gray가 가장 짧았으며, Light gray에서 가장 길었다. 평균 동공크기는 Dark gray에서 가장 컸으며, Light gray에서 가장 작았다. 평균 눈 깜박임 빈도수는 Dark gray에서 가장 적었으며, Light gray에서 가장 많았다. 모니터 글자 밝기에 따른 눈의 피로도는 Dark gray에서 가장 적었으며 Black, Gray, Light gray 순으로 증가하였다.

공학적 활용을 위한 천부지반 틸트 모니터링 (Shallow-depth Tilt Monitoring for Engineering Application)

  • 이상규
    • 지질공학
    • /
    • 제3권3호
    • /
    • pp.279-293
    • /
    • 1993
  • 최근, 우리나라에서는 지반변형에 기인된 인공구조물의 대형 붕괴사고가 빈번했으며, 뿐만 아니라 산사태, 단층의 활동성 여부에 대한 논란 등 자연적 지반변형도 중요한 문제로 대두되고 있다. 본 연구에서는 천부지반의 한 기준면의 2 - 축 틸트변화를 6개월간 연속관측하고 그 자료를 처리 분석함으로써 천부지반의 변형으로 부터 야기될 수 있는 재해의 사전 예방기술을 마련할 목적으로 수행되었다. 연구소 부지내, 산사면에 설치한 2 - 축 틸트 센서를 이용하여 0.0001 arc.sec의 정밀도로 매 10분 마다 측정된 관측자료는 센서위치로 부터 200m 유선연결된 연구실 내 PC에 interface를 통하여 실시간으로 기록 저장된다. 관측한 계수형 2 - 축 틸트자료는 공학적 활용을 염두에 두고 관련 기상자료들과 함께 처리 분석되었다. 6개월 간의 2 - 축 틸트 관측기간 중, 순(net) 틸트는 서쪽으로 10.06arc.sec, 남쪽으로 73.88arc.sec를 나타냄으로써 $S7.75^{\circ}W$ 방향으로 74.56arc.sec 기울어, 시간 당 평균 0.02arc.sec의 틸팅을 하였다. 관측위치에서의 지반이 이와 같이 빠르고 큰 틸팅을 하였음에도 불구하고 동-서 및 남-북성분의 틸트가 모두 일정한 값에 수렴해 가는 추세에 있으므로 본 위치는 공학적으로 안전한 것으로 판단하였다. 본 연구를 통하여 지표 경사방향 및 pore pressure 증가방향으로 분류되는 대, 소의 변형 event들과 강우와의 관련성을 확인하였으며, 대기 온도변화의 영향에 의한 2-축 틸트 일변화는 온도변화에 평균 4.3시간 지연되어 나타나는 사실과, 대기압 변화와 변형과의 상관관계의 가능성 등도 제시하였다.

  • PDF

안강망어구의 모형실험 (MODEL EXPERIMENT OF STOW NET)

  • 고관서;김용해
    • 한국수산과학회지
    • /
    • 제12권4호
    • /
    • pp.201-207
    • /
    • 1979
  • 재래식 안강망 어구를 축소비 1/40로 줄여서 전개 장치를 한 모형어구에 대하여 회류수조에서 실험한 결과를 요약하면 다음과 같다. 1) 모형어구의 저항은 수해와 암해르 부착했을 때 $R=1.66V^{1.02}$, 수해를 떼어내고 전개건과 뜸을 달았을 때 $R=3.11V^{1.54}$ (R:kg, V:m/sec)이며 실물에서 유속 1m/sec일 때 저항은 각각 5.2ton, 6.8ton정도이다. 2) **고는 모두직선적으로 감소하여 재래식에서는 h=89.22-2.42(V-15), $(V\geqq15)$, 전개건과 뜸을 달았을 때 h=89.20-0.87V, (h:cm V:cm/sec)이며 이것은 실물에서 유속 1m/sec일 때에도 **고는 약 20m 정도가 된다. **폭은 전개건줄의 길이로 조성할 수 있다. 3) **구의 단면적은 저속일 때는 비슷하나 유속 0.25m/sec 이상에서 전개건을 달았을 때가 월등히 증가하여 실물에서 유속 1.0m/sec일 때 약 $736m^2$가 된다. 어획효율도 단면적에 비례하므로 전개건을 달았을 때 그 효율은 1.53 이 된다. 4) 재래식 안****은 유속의 증가에 따라 옆판에 주름이 너무 많이 생기므로 적당한 성형율과 사단방법이 필요하다. 5) 전개건은 숫걸리줄, 암걸리줄 및 전개건줄의 길이와 그 결부위치의 조성으로 **고, **폭 및 **형을 어느정도 조성할 수 있으며, 정조시 전개건과 그 물이 어떤 상태에 있더라고 유속과 유향의 변화가 생기면 항상 전개력을 나타낼 수 있다.

  • PDF

에너지 절감형 항온항습기 운전 특성에 관한 연구 (Study on the energy-saving constant temperature and humidity machine operating characteristics)

  • 차인수;하민호;정경환
    • 에너지공학
    • /
    • 제25권3호
    • /
    • pp.27-33
    • /
    • 2016
  • 본 연구에서 적용한 열회복 방식은 적은 동력사용으로 최대의 냉각능력을 낼 수 있는 에너지 절약형이다. 항온항습기의 온습도를 보다 정밀 한 제어 기능을 갖도록 하기 위해 제어 알고리즘은 퍼지 PID 제어기를 설계하여 적용하였고, 외기보상장치(공냉식)를 갖추어 동절기에 $-20^{\circ}C$에서도 우수한 제습능력을 발휘하게 하였다. 고효율, 저소음형 시로코 팬을 채용하여 정숙운전이 되며 장비특성에 따라 상향식과 하향식에 맞도록 설계하였다. 실험한 결과 변환 효율은 95%이상, 정전복귀는 5sec 이내, 정지지연은 30sec 이내, 펌프다운은 10sec, 펌프지연은 5sec, 히팅지연은 5sec, 온도편차는 ${\pm}2^{\circ}C$(냉방편차: $2^{\circ}C$, 난방 편차: $2^{\circ}C$), 습도편차는 ${\pm}5%$(가습편차 3.0%, 제습편차 3.0%)을 갖게 하였다. 최근 유비쿼터스 기술이 중요시 되고 있기에 핸드폰을 통해 항온항습기를 원격 제어 할 수 있도록 하였고, MMI 소프트웨어와 자동 인터페이스를 지원하여 확장성이 뛰어나게 하였다. 또한 지능형 컨트롤러 고장진단에 의한 부품 및 장비의 수명이 연장 되도록 하였다.

핵이식 수정란의 동결, 융해 및 이식에 의한 클론동물의 생산 II (Production of cloning animals by fresh and frozen-thawed nuclear transfer embryos II)

  • 황우석;조충호;이창우;이병천
    • 대한수의학회지
    • /
    • 제33권3호
    • /
    • pp.547-554
    • /
    • 1993
  • This study was carried out to investigate the best condition for in vitro and in vivo culture after freezing and thawing of nuclear transplant 2 cell embryos. When nuclear transplant embryos were submitted to electrofusion, the significantly higher fusion rates of 2 cell donor nuclei were achieved at the electric field strength of DC 1.5 kV/cm for 100 and $150{\mu}sec$, DC 2.0 kV/cm for 100 and $150{\mu}sec$ than DC 1.0 kV/cm for 100 and $150{\mu}sec$(p<0.01). The significantly higher fusion rates of 4 cell donor nuclei were achievecl at DC 2.0 kV/cm for 100 and $150{\mu}sec$ than DC 1.0 kV/cm for 100 and $150{\mu}sec$(p<0.01). The fusion rates in 8 cell donor nuclei were 94.2~99.3%. The developmental potency to blastocyst in 2 cell donor nuclei was significantly higher in DC 2.0 kV/cm for $150{\mu}sec$ treated group(p<0.01). The significantly higher developmental potency to blastocyst in 4 cell donor nuclei were achieved at the electric field strength of DC 2.0 kV/cm for $150{\mu}sec$ than DC 1.5 kV/cm for 100 and $150{\mu}sec$, DC 2.0 kV/cm for $100{\mu}sec$ treated group(p<0.01). The develop mental potency to blastocyst in 8 cell donor nuclei was significantly higher in DC 2.0 kV/cm for $100{\mu}sec$ treated group(p<0.01). The developmental potency to blastocyst after nuclear transplantation was significantly higher in 2 cell donor nuclei than in 8 cell donor nuclei(p<0.01). When the recovered embryos in normal morphology were cultured in vitro, there were no significant differences in the developmental potency to blastocyst between the freezing methods and the concentrations of cryoprotectant(p<0.01). The production rates of offspring after transfer of nuclear transplant embryos to recipient mouse were no significant difference in 2, 4 and 8 cell donor nuclei.

  • PDF

포도상구균 장내 C 형 변이독소 (SEC mutant)의 면역원성에 대한 연구 (Immunogenicity of staphylococcal enterotoxin C mutant antigen in mice and dairy cows)

  • 장병선;주이석;문진산;서근석;양수진;김소현;박용호
    • 대한수의학회지
    • /
    • 제41권2호
    • /
    • pp.177-188
    • /
    • 2001
  • Mastitis is one of the most significant cause of economic loss to the dairy industry. Especially, Staphylococcus aureus is a major contagious mastitis-causing pathogen in dairy cattle. Because of its high transmission rate and resistance to antibiotic therapy, staphylococcal mastitis presents a constant threat to the dairy industry. Staphylococcal enterotoxin C(SEC) produced by S aureus has been known as one of superantigens which are able to stimulate a large proportion of T lymphocytes independently of their antigenic specificity. In this experiment, we have conducted preliminary studies with mice and lactating cows to evaluate the immunogenicity and safety of the experimental vaccine consists of SEC mutant antigen on controlling the bovine mastitis associated with S aureus infections. The average value of somatic cell counts in quarter milk, isolation rate of S aureus were consistently decreased in SEC-SER vaccinated groups, whereas antibody titers were highly increased in SEC-SER vaccinated groups. Peripheral blood were also collected from the lactating cows to determine the proportion of leukocyte subpopulation associated with humoral immunity(HI) and cell mediated immunity(CMI). Proportion of leukocyte subpopulation expressing $BoCD2^+$(total T lymphocyte), $BoCD4^+$(T helper cell), $BoCD8^+$(T cytotoxic/suppressor cell) and NonT/NonB lymphocyte which are involved in CMI in SEC-SER vaccinated groups were decreased for the initial stage after first vaccination and then increased from ten weeks after first vaccination maintaining elevated level till 14 weeks after vaccination. In contrast, proportion of monocyte, MHC class II and B lymphocyte which are associated with the production of primary immune response in SEC-SER vaccinated groups were increased for the initial period and then decreased from ten weeks after first vaccination. We present evidence that vaccination of SEC-SER mutant antigen in lactating cows induced a significant proliferation of bovine T lymphocytes. These results suggest that SEC-SER mutant antigen used in this experiment might be one of potential immunogen in developing innovative vaccine against bovine IMI associated with S aureus. Additional challenge trials should be carried out to evaluate substantial protection against S aureus under the commercial farm conditions.

  • PDF